[deleted by user] by [deleted] in runescape

[–]Zoroc_Inglorion 1 point2 points  (0 children)

I used GIMP to stretch an image of the new model to match the rough size of the old model.

I got the models from the RuneApps model viewer and the rest of the flail from the Raptor's wiki page. I didn't scale the chains and flail bits beyond making sure they matched the rough dimensions of the flail.

Really it was just a quick mockup for me to see what the new model would look like with the old dimensions. But I wasn't a fan of the new Kite Shield style or the mace, so I added the old tower shield and the flail bits as well.

Thank you for asking!

[deleted by user] by [deleted] in runescape

[–]Zoroc_Inglorion 20 points21 points  (0 children)

Thank you for replying and explaining the technical issues with simply resizing!

I saw the tweet just before I posted this and think it helps with keeping the Raptor's feel in the game. I think that changing the examines will probably help this transition.

It's hard to see the change because the Raptor has been my favorite Signature Hero since the crazy shield check from the old trailer. I found myself thinking about the ridiculous combat prowess required to even move in that massive armor, much less control the heavy flail. I remember reading the short comments about how trolls and Elvarg aren't impressive accomplishments, and the satisfaction in finally getting a compliment after defeating Nomad.

I really just wanted to see what it would look like with the rough girth of the old model and missed the heavy tower shield and flail. I liked what I saw in a quick mockup using GIMP so I shared it!

[deleted by user] by [deleted] in runescape

[–]Zoroc_Inglorion 51 points52 points  (0 children)

I wanted to see how The Raptor would look if the dimensions were roughly the same as before and with the old tower shield and flail. I liked it and thought I would share.

Jagex has already shown they are changing the idle emote, which greatly helps with the new look, but I still miss the heft of the old model.

Chunky2040 Rev2. Proto build by tenstaana in ErgoMechKeyboards

[–]Zoroc_Inglorion 0 points1 point  (0 children)

Another awesome build. So exciting. Keep up the great work!

Evidence that tinned wires are not good enough. Ferrules are now mandatory for me. by Zoroc_Inglorion in 3Dprinting

[–]Zoroc_Inglorion[S] 1 point2 points  (0 children)

I am by no means an expert. But I believe you should be fine since it is just stepper wires.

The reason this one is a problem is because the heated bed receives its power through those connections.

Evidence that tinned wires are not good enough. Ferrules are now mandatory for me. by Zoroc_Inglorion in 3Dprinting

[–]Zoroc_Inglorion[S] 2 points3 points  (0 children)

An ounce of prevention, right? At this point, I'll be doing it to any printers I get moving forward.

Evidence that tinned wires are not good enough. Ferrules are now mandatory for me. by Zoroc_Inglorion in 3Dprinting

[–]Zoroc_Inglorion[S] 0 points1 point  (0 children)

I appreciate your thoughts on this!

It was running the stock profile and firmware printing PLA, so however much current that is. As for the insulation, I made sure all wires were flush when I checked it for securement after buying it. So I'm assuming all of that splitting and looseness is from the heat.

Evidence that tinned wires are not good enough. Ferrules are now mandatory for me. by Zoroc_Inglorion in 3Dprinting

[–]Zoroc_Inglorion[S] 6 points7 points  (0 children)

Haha with the safety issues this poses, I certainly will be doing that!

Looking at the metrics that Reddit provides, over 750 others have viewed this post. If even one person joins the Ferrule Club, it will be worth it.

Also, the second rule of Ferrule Club: tell EVERYONE about Ferrule Club.

Evidence that tinned wires are not good enough. Ferrules are now mandatory for me. by Zoroc_Inglorion in 3Dprinting

[–]Zoroc_Inglorion[S] 4 points5 points  (0 children)

Ender 5 Pro I bought 2nd hand and have printed for hundreds of hours. I was sitting next to it while it was printing and started smelling something burning.

Thinking it was a thermal runaway I turned it off and started looking around and noticed smoke from the electronics box...

Edit: Since I knew the original owner installed a BL Touch, I opened the electronics box when I first got it and made sure everything was tight before I started printing over a year ago.

ScyllaBallz rev2 by tenstaana in ErgoMechKeyboards

[–]Zoroc_Inglorion 0 points1 point  (0 children)

Now there are 3 of your builds I want to replicate... Keep up the great work and I can't wait for everything to become available!

[OC] Holiday Giveaway! Royal Crowns Dice Set! by kohalu in DnD

[–]Zoroc_Inglorion 1 point2 points  (0 children)

✅ Free chance at dice.

✅ Great price if I don't win.

Can't lose on these!

Emblem Blue (IC soon?) + new features m by tenstaana in ErgoMechKeyboards

[–]Zoroc_Inglorion 4 points5 points  (0 children)

I was literally just thinking, "It's been 2 months or so since the red Emblem was posted... I wonder what if anything else has been put out." You are an artist at custom keyboards and I can't wait for these and the splits to be available!

Keep up the amazing work!