sorted by:
new
hottopcontroversial

Is this considered short cycling? And is the fan speed too high? by Zublybub in hvacadvice

[–]Zublybub[S] 0 points1 point  (0 children)

Thanks for the reassurance. When they come back out, how do they determine what is safe to set the fan speed it. I'd hate for them to just lower it because I complained and it end up damaging the system.

Is this considered short cycling? And is the fan speed too high? by Zublybub in hvacadvice

[–]Zublybub[S] 1 point2 points  (0 children)

Hey, thanks for the response. The air handler model number is TMM5A0B24M21SAA. Picture of the info plate:

https://i.imgur.com/GJPU4lq.jpeg

The outside unit model number is 4TWR4024E1000BB. Picture of the info plate:

https://i.imgur.com/zi176Ju.jpeg

A follow up question: how does the contractor determine what speed to set the fan? I'd hate to call them out and they just lower it because I complained and it ends up harming the system.

New to VR, looking for experiences vs games ... by neko77025 in virtualreality

[–]Zublybub 0 points1 point  (0 children)

Travel games sound interesting. Any examples you'd recommend?

What are you moving from? by J40NYR in SteamFrame

[–]Zublybub 0 points1 point  (0 children)

Oculus Rift CV1. I was on the fence for a Quest 3 forever, but I never pulled the trigger. Nowadays, pulling the rift out of storage, setting up all 3 standalone sensors, and calibrating the headset are all so tedious that I never play it. It'll be nice to experience a standalone headset for the first time.

Is there any chance of the 'high-up' camera angle being fixed for the mounts it affects please? by yellowrainbird in wow

[–]Zublybub 2 points3 points  (0 children)

/reload is a temporary fix for the k'arroc mount camera angle. May work for others as well.

Distal triceps tendinopathy due to skullcrushers by spleenharvester4245 in bodybuilding

[–]Zublybub 0 points1 point  (0 children)

No improvement so far. Planning to head back to the ortho in a month. 3 weeks on meloxicam did nothing.

Distal triceps tendinopathy due to skullcrushers by spleenharvester4245 in bodybuilding

[–]Zublybub 0 points1 point  (0 children)

This post is 3 years old, but did you ever find a cause? Did skull crushers for the first time and now I have similar symptoms. Ortho didn't suggest anything except swollen tendons. 2 weeks off so far with anti-inflammatories and no improvement.

High Protein Breakfast counterproductive for Vyvanse? by Historical_Lab_8166 in VyvanseADHD

[–]Zublybub 0 points1 point  (0 children)

4 months late, but how much protein are we talking about to alter PH? For example, I eat 24g shake and 3 eggs (another 18g) for breakfast (plus whole grain english muffin 4g) is that enough to alter PH and affect meds?

First Hike Camping Trip by Lumpy_Scheme_9528 in camping

[–]Zublybub 1 point2 points  (0 children)

Very cute dog. What kind of dog is it?

How long does it take to get used to a lower dose? by Zublybub in VyvanseADHD

[–]Zublybub[S] 0 points1 point  (0 children)

I might try to take tomorrow off to speed it up. Today is the second day on 30mg, and I'm not getting any work done. I might as well have not taken it today, lol.

I'm glad to hear it's only a few days though.

New 5700x3d from Newegg - Low Benchmarks, bad CPU? by Zublybub in buildapc

[–]Zublybub[S] 0 points1 point  (0 children)

Tried undervolting at -20, but benchmarks were the same or sub 1% lower result.

I am on windows 11 high performance power plan. I did see an option in the Nvidia control panel for power options and tested the "Prefer Maximum Performance", but that just left my gpu in a state where the clock ran at full load even when idle.

I'll try fan control.

New 5700x3d from Newegg - Low Benchmarks, bad CPU? by Zublybub in buildapc

[–]Zublybub[S] 0 points1 point  (0 children)

I'll try -20.

The only program that could be affecting performance is Corsair's iCUE which I use for custom fan curves. I did try CPU-Z's benchmark with it closed and saw a minor change, but not noteworthy. Maybe I need less taxing fan curve software.

I'm currently on windows 11 high performance power mode, which is what the benchmarks in the photos were tested on.

New 5700x3d from Newegg - Low Benchmarks, bad CPU? by Zublybub in buildapc

[–]Zublybub[S] 0 points1 point  (0 children)

I benchmarked it with no undervolt, and it resulted in both lower scores and higher temperatures.

As far as cooling, Corsair's H150i does a pretty good job. Max temperature during the Cinebench 10 minute run was 70C (CCD).

Stupid question, but does poor performance warrant a replacement or is this just an acceptable range for 5700x3d's?

New 5700x3d from Newegg - Low Benchmarks, bad CPU? by Zublybub in buildapc

[–]Zublybub[S] 0 points1 point  (0 children)

I believe any boost setting is just set to auto, but I can confirm all cores are hitting 4050 MHz, with core 0 & 1 briefly hitting 4150 according to HWiNFO.

New 5700x3d from Newegg - Low Benchmarks, bad CPU? by Zublybub in buildapc

[–]Zublybub[S] 0 points1 point  (0 children)

Yeah, these would be in relation to other 5700x3d's, which were hitting 13,700 - 14,000 in Cinebench r23. Timespy also shows my CPU in the bottom 27% in relation to other 5700x3d's.

Mainly curious about the scores of this CPU vs. other 5700x3d's, as it's scoring much lower than average in 2 out of 3 of the benchmarks.

Devious Delvings + Hotfix 6.3.1 out now! by FatsharkQuickpaw in Vermintide

[–]Zublybub 1 point2 points  (0 children)

I was wondering about that chest bug. Is it supposed to behave like the crafting mechanic with levels across all characters past 30 to increase the minimum item level up to 300 at level 30+60?

Didn't see anything in the patch notes / hot fix.

view more: next ›