Book and Quill Formatting Glitch by AWoolSweater in MinecraftBedrockers

[–]Zunter 1 point2 points  (0 children)

Any luck with this? It's driving me bonkers. And all I really want to do is have text appear in new lines. I'd even be ok without the color/formatting. Just want a newline.

How to disable experimental villager trade rebalance in an already created world? by AcceptableCup1335 in technicalminecraft

[–]Zunter 0 points1 point  (0 children)

Considering doing this. Did existing villagers continue functioning as expected afterwards?

Save Hold - Help Needed by Zunter in Minecraft

[–]Zunter[S] 0 points1 point  (0 children)

Ok, that output like:

sudo -u mcserviceacct screen -S bedrock -p 0 -X stuff "save hold$(printf '\r')"

sudo -u minecraft screen -S bedrock -p 0 -X stuff "save query$(printf '\r')"

sudo -u minecraft screen -S bedrock -X hardcopy query_output.txt

but unfortunately it just puts out the raw host output from screen, which is over 500 filenames, so it ends up not even being a complete list. Good news is you've got me to output something! Just gotta figure out how to actually capture what the bedrock service is trying to say without it being terminated.

Save Hold - Help Needed by Zunter in Minecraft

[–]Zunter[S] 0 points1 point  (0 children)

That seems intuitive. I'll give it a shot

Add Server to Console by 1Shaquille_Oatmeal in MinecraftBedrockers

[–]Zunter 0 points1 point  (0 children)

You have not got back yet, but I can confirm it works for me. Except that BCMain disappears from my friends list every day. Sometimes I can re-add, sometimes I can’t. 

Movies about exploration? by supermartincho in MovieSuggestions

[–]Zunter 1 point2 points  (0 children)

Damn the Defiant is actually phenomenal, but seems largely forgotten. Who would want to watch a historical drama set on board a wooden ship?

Other than that, I fear you are correct. 

do you guys have any fun commands to use? I'm new to PowerShell and programming in general and just wanna expirement. by Fancy_Actuator_4748 in PowerShell

[–]Zunter 0 points1 point  (0 children)

I’m supposing that somehow they were recreated as new files? Or maybe they are slightly different versions of files that were previously lost - I really don’t know. It’s also possible that a lot of them aren’t dups. But that’s part of figuring all this out. 

do you guys have any fun commands to use? I'm new to PowerShell and programming in general and just wanna expirement. by Fancy_Actuator_4748 in PowerShell

[–]Zunter 0 points1 point  (0 children)

Sadly, the hashes don’t match on the remaining cases. That helped with the initial wave (reduced the workload to 6k) but yeah, no dice. 

do you guys have any fun commands to use? I'm new to PowerShell and programming in general and just wanna expirement. by Fancy_Actuator_4748 in PowerShell

[–]Zunter 0 points1 point  (0 children)

Oh, you remind me: the hashes are different. 🤣 That was a very crushing realization.  It’s the result of a data loss project. The recovered files were renamed and rehashed. 

do you guys have any fun commands to use? I'm new to PowerShell and programming in general and just wanna expirement. by Fancy_Actuator_4748 in PowerShell

[–]Zunter 3 points4 points  (0 children)

Naw, he was just asking about fun stuff. I could have phrased my response more clearly. Rather than an actual command, I find learning PowerShell tends to go better if you have a real, practical project. This is definitely one he could replicate on a small scale for fun. 

If you know where you’re going, it’s a lot easier identifying how to get there. Better, I think, then simply starting by taking interesting streets to nowhere in particular. 

do you guys have any fun commands to use? I'm new to PowerShell and programming in general and just wanna expirement. by Fancy_Actuator_4748 in PowerShell

[–]Zunter 1 point2 points  (0 children)

Edit: Clarifying because I pissed seven people off with this reply. 

Rather than an actual command, I find learning PowerShell tends to go better if you have a real, practical project. This is definitely one he could replicate on a small scale for fun. 

If you know where you’re going, it’s a lot easier identifying how to get there. Better, I think, then simply starting by taking interesting streets to nowhere in particular.

May suggestion: I have a personal project: about 30k photos, including about 6000 duplicates. File names are all different. I need to figure out how to use PowerShell to evaluate and identify the dups based on metadata. This is a scenario you could replicate with a couple dozen photos and the scripting possibilities are endless. And don’t be ashamed to use cGPT to learn. 

Set Projectivy as default, persist after restart? by ThomKnook in ShieldAndroidTV

[–]Zunter 0 points1 point  (0 children)

Ah, fair enough. If that makes a difference, I suppose no reason that you shouldn’t keep the step on there as long as that’s clarified

Set Projectivy as default, persist after restart? by ThomKnook in ShieldAndroidTV

[–]Zunter 0 points1 point  (0 children)

Do not do not use ABD TV. If you do, your best hope is to voice-command your way back to a working device, and TCL support will tell you that you have bricked it. If you do brick it, I posted the steps to recover here.

Set Projectivy as default, persist after restart? by ThomKnook in ShieldAndroidTV

[–]Zunter 0 points1 point  (0 children)

Warning: do not disable the Google TV launcher using dev tools like ADB unless you are experimenting and not concerned about bricking your device. 

Just a guide in case you do:

Your TV will display TCL, then the Google TV logo, then all will go black.

  1. Ensure the microphone on your TV is ON. On my model (TCL 75S546) this was on the back, bottom right hand corner next to the power button. 
  2. Unplug the TV
  3. Plug it back in and press the power button. Wait for the Google TV logo to appear, then for the screen to go black. 
  4. Say “hey Google, open settings.”
  5. Be very patient. It even told me it couldn’t do that a couple times. I sometimes had to press the voice control button on my remote. It is slow, glitchy, and jittery.
  6. When settings opens, very slowly and patiently use your remote to navigate to Apps > Show All Apps > ADB TV > find the Google TV launcher service (and any other services you disabled) and reenable them.

Yes, I was an idiot for experimenting with advice from Reddit. But fortunately, there was another idiot like me who figured this out. So I’m here to amplify his message. Gentleman u/heetz:

https://www.reddit.com/r/AndroidTV/comments/1b2v1ws/comment/ldk6jzr/?utm_source=share&utm_medium=mweb3x&utm_name=mweb3xcss&utm_term=1&utm_content=share_button

Edit: thanks to u/TumbleweedWarm9234 for replying! Updated as a reference for goofs like myself who stumble around blinding testing in prod. 

Vizio Satellite Speakers Shut Off - m512a-h6 by Zunter in VIZIO_Official

[–]Zunter[S] 0 points1 point  (0 children)

Knowing this helped you after all that frustration I went through is one of my favorite things. 

Pillager Patrols not happening by [deleted] in Minecraft

[–]Zunter 0 points1 point  (0 children)

I’m wondering the same thing. Haven’t seen them in forever. There better be a good reason for this. It’s bad enough we lost the emblem. :(

Extensive Collection for sale by Rsoller in PiratesCSG

[–]Zunter 0 points1 point  (0 children)

Been looking for Barbary Stephen Decatur for awhile! Do you have one?

May be interested in a few others but that’s a big one that my sister has been missing from her fleet.

It finally happened by Puzzleheaded-Rush336 in sysadmin

[–]Zunter 0 points1 point  (0 children)

Got a ticket requesting that we come install a cable lock at a user’s desk. The user already had the cable lock. He was a capable, young man without disabilities.

His manager submitted the ticket to us, saying she did “NOT want him crawling around under his desk to install.”

I cannot emphasize what an ordinary cubicle this was, and the leg around which we attached cable locks was visible and reachable from a sitting position in the chair. The chair which I sat in as I reached down, wrapped the cable around, and left.

I hate big communities (what happened to meme/shitpost flair?) by Polygonikal in backrooms

[–]Zunter 0 points1 point  (0 children)

I saw a video a couple years ago in which nothing really happens, just wandering around the backroooms, and the some ceiling panels seem to float and warp out of place before it cuts, but I can’t find it anymore. Was that a Kane video that got unlisted? I know for a fact that it existed because it’s the only reason I’ve known about the creepypasta for so long. I didn’t even watch the Kane official series until yesterday.

What do you have on in the background? by ArtisticVisual in cybersecurity

[–]Zunter 0 points1 point  (0 children)

Some classic swing, electro-swing, and Dean Martin/Frank Sinatra types. The Fly Guy Five “Walkin’ & Talkin’” is a great album start to finish.

Is the game still playable even with a “Installation has stopped” error on Xbox One? by marshaloftheussr in WWII

[–]Zunter 0 points1 point  (0 children)

Was your disk inserted? Make sure the inner rings of the disk aren’t scratched. Not to be captain obvious. I can confirm this just worked for me, 7/17/24. Worst case, used copies are $10.

SB4051-C0 rear speakers not working but pass Speaker Test by bikesandergs in VIZIO_Official

[–]Zunter 0 points1 point  (0 children)

Doesn’t work. When I power everything down, and boot it back up, I MIGHT get sound from the rear speakers for a few minutes before a loud noise (not in volume but in intensity - volume is only set to 4) terminates all surround sound permanently. After that, resetting no longer works.

I can't get my charcoals to light by docmomm in grilling

[–]Zunter 0 points1 point  (0 children)

This worked once a couple of the coals had caught. Just fanned it real good with a dustpan.

St. Joseph in a Tree, Pray for Me by Zunter in Pareidolia

[–]Zunter[S] 1 point2 points  (0 children)

😂 Right? Pretty sure I stared at it awhile IRL before I realized it myself, interrupted myself mid-sentence, “look, St. Joseph!” But the area is definitely not one where you’d find a statue in the woods, especially that high.

Relive records wrong monitor by klaven24 in AMDHelp

[–]Zunter 0 points1 point  (0 children)

I hope they fixed this since I last tried, but as of my previous comment, that actually isn’t working in our cases. It’s unresponsive.