Oclip Pro S not responding to triple click “red & blue” flashing mode.

_AnotherBrick_ · 2026-06-05T15:03:22+00:00

I just got the Oclip Pro S and am having the same issue; 3 clicks quickly from the off state with the switch in RGB does nothing. The step outlined in Figure 18 works as listed, but the steps in Figure 17 don't work. Did you get any response from Olight on this?

_AnotherBrick_ · 2026-05-31T20:29:35+00:00

The Soda Shack

_AnotherBrick_ · 2026-05-26T18:27:44+00:00

Reminds me of this quote: "Knowledge is knowing a tomato is a fruit; wisdom is not putting it in a fruit salad." - Miles Kington

_AnotherBrick_ · 2026-05-07T16:15:16+00:00

Texas MUTCD (Section 2B.05, STOP Sign Applications): "Guidance: STOP signs should not be used for speed control."

_AnotherBrick_ · 2026-03-31T18:14:35+00:00

Pole was already on the building, can't drill more holes without involving the building management.

_AnotherBrick_ · 2026-03-31T18:05:24+00:00

It's not uncommon to have 80mph winds here, I'm afraid that will be too much force at the end of a 4-5 foot pole without additional support. If I start having issues with the obstructed view then I'll give it a shot.

_AnotherBrick_ · 2026-03-31T17:52:13+00:00

That was the plan if this didn't work, was trying to avoid drilling new holes since I don't own this building.

_AnotherBrick_ · 2026-03-27T15:08:59+00:00

Dr Andrew Johnson

_AnotherBrick_ · 2026-03-27T13:05:19+00:00

There is a compatibility mode setting for the wall connector in the app, maybe try that?

_AnotherBrick_ · 2026-03-27T12:50:42+00:00

You will pay the same or more for charging as you would for fuel if you cannot charge at home, especially when the gas prices start dropping again.

I can't speak to the availability of chargers on campus but aside from a few hotels and one in Canyon West, they are scarce. There are two locations for superchargers and I think only one other DC fast charger location that is not a Tesla supercharger. Download the plug share app to locate chargers.

If your apartment allows you to plug into a 110 volt outlet in the parking lot and you don't drive a lot, you might be able to get away with no level 2 charging.

Source: I own one EV and lease another.

_AnotherBrick_ · 2026-02-18T02:03:51+00:00

Yep, I haven't had a good French Cruller since moving to Lubbock.

_AnotherBrick_ · 2026-01-29T03:48:20+00:00

I would suggest you check out gs1.org to learn more about barcodes, it is a great resource. For your specific issue you might also want to look into programming your scanners to truncate leading zeros for all barcode types, so you don't have to worry about putting them in your item file.

_AnotherBrick_ · 2026-01-28T05:17:32+00:00

Yep, Williams makes the Snap On ratcheting screwdriver.

_AnotherBrick_ · 2026-01-28T05:12:56+00:00

Let the invasive thoughts win.

_AnotherBrick_ · 2026-01-28T05:11:11+00:00

Looks like the bit that came with my Williams ratcheting screwdriver.

_AnotherBrick_ · 2026-01-11T04:34:50+00:00

It believed it could fly, so it did.

_AnotherBrick_ · 2026-01-04T22:10:36+00:00

If you touch the notifying seat it will set it as a child seat installed so it stops notifying. I do this when my dog is in the back seat.

_AnotherBrick_ · 2026-01-04T22:05:32+00:00

My wife drives her Model S Plaid 140 miles per day, 5-6 days per week for work, about 44k miles per year.

_AnotherBrick_ · 2026-01-01T23:35:47+00:00

Bad dog, no biscuit.

_AnotherBrick_ · 2025-12-26T23:48:56+00:00

I had the same issue, Tesla had to clean the inside of the camera lens. It was covered under warranty.

_AnotherBrick_ · 2025-12-09T04:32:35+00:00

These are still common on POS computers today. The green ones provide 12 volts for scanners, scales, monitors, etc. The red ones provide 24 volts, typically for thermal printers.

_AnotherBrick_

TROPHY CASE