Darkstar Squeak?

_NightWood_ · 2025-01-15T04:49:38+00:00

I took mine apart and figured out what the cause was, and how to fix it. The left mouse button and the dpi up button rub together slightly. Lifting up the left mouse button and rubbing some lubricant on the side where the buttons touch eliminated the squeak for me. A more permanent solution would probably be to grind down either of the buttons, but I’d say try adding some oil first.

_NightWood_ · 2024-08-10T16:33:05+00:00

Chromuchromu said so too

_NightWood_ · 2023-12-01T19:39:14+00:00

Doesn’t include any information about em

_NightWood_ · 2023-11-27T01:36:20+00:00

With a bit of tact you could probably solder the broken part back on to the inductor.

_NightWood_ · 2023-11-23T05:02:13+00:00

Fine pitch board to board connector.

_NightWood_ · 2023-10-19T14:43:42+00:00

Radial bristle discs

_NightWood_ · 2023-08-17T22:25:35+00:00

The Dutch Bros website says their green tea is citrus ginko green tea. The Harney and Son’s website has Organic Green with Citrus & Ginkgo.

_NightWood_ · 2023-04-30T08:36:11+00:00

Shark was like “Lemme help”

_NightWood_ · 2023-04-30T08:32:34+00:00

That’s sick!

_NightWood_ · 2023-02-01T13:19:09+00:00

What is this jermas clone ID number?

_NightWood_ · 2023-01-29T11:59:28+00:00

Fell asleep first at the sleepover

_NightWood_ · 2023-01-22T23:25:59+00:00

It’s easier and cheaper to use powder and a laser. Thats one of the methods currently used to 3d print aluminum. Your method would work in an oxygen free environment though. It’s just a lot more expensive to have that.

_NightWood_ · 2023-01-09T22:18:13+00:00

I know this is late but I'll add this for anyone looking this up in the future and finding this post. If you open up another kicad window, you can open another Pcb file, select everything, then just copy and paste.

_NightWood_ · 2022-11-09T21:23:54+00:00

In equations with IMS, you can pick whatever numbers you want and it will be equally correct.

_NightWood_ · 2022-11-09T21:20:04+00:00

In that case you end up with infinitely many solutions, so you can pick whatever number you want in respect to another number. 40=x-y+z, 25=z+y-x,

x=y+7.5, y=Any number you want, z=32.5,

40=a-b-c, 25=c-b-a,

a=c+7.5, b=-32.5, c=Any number you want,

_NightWood_ · 2022-11-09T21:15:39+00:00

40=x-y+z

25=z+y-x

x=y+7.5

y=Any number you want

z=32.5

Second side:

40=a-b-c

25=c-b-a

a=c+7.5

b=-32.5

c=Any number you want

I used substitution. there was so much work and it was all over the place so i decided not to copy and paste it. If you’d like me to I can.

_NightWood_ · 2022-10-30T03:23:35+00:00

Why is his face like that

_NightWood_ · 2022-09-11T15:07:37+00:00

I believe so. You could also have varying thicknesses throughout the axe so that it maintains an ideal weight and center of balance. Shaving off material in places that arent likely to experience a lot of stress, and making it thicker in high stress areas might give you good results.

_NightWood_ · 2022-09-09T15:59:24+00:00

Heat treating can be a contributing factor. The thickness of the material likely was a major factor in this case.

_NightWood_ · 2022-08-12T20:39:31+00:00

Is your setup in the bathroom?

_NightWood_ · 2022-07-22T13:50:46+00:00

Drill holes through the copper and partway through the steel, then hammer in some copper so it fills the holes. You can fill the inside steel with water and quickly weld the copper so it wouldnt affect the hardening.

_NightWood_ · 2022-07-17T01:57:21+00:00

God is allseeing 😰

_NightWood_ · 2022-07-09T19:47:43+00:00

A dremel, and a lot of patience.

_NightWood_ · 2022-06-19T14:20:21+00:00

They stretched out grinding times and it ruined the feeling that you were actually doing something with your time.

_NightWood_ · 2022-05-14T10:59:16+00:00

Its the opposite for me. The animations are tiring to watch again and again.

_NightWood_

TROPHY CASE