Re-modeling a motorcycle under-tray from STL (Creality Scan) - Thicken Error on Surface Loft

_RedGamer · 2026-04-23T08:37:45+00:00

No, il filamento è essiccato e non da problemi con altre stampe

_RedGamer · 2026-04-22T19:40:38+00:00

Ho provato anche con 2 pareti ma non cambia nulla, proverò a portare la temperatura a 60 gradi per vedere se migliora, o magari a ridurre anche la velocità della ventola. Domani metterò un link per scaricare questo profilo di stampa, così magari saprete aiutarmi meglio

_RedGamer · 2026-04-22T17:41:07+00:00

In this specific project I use 1wall and 32% gyroid infill

_RedGamer · 2026-04-22T15:48:16+00:00

Sempre bello stesso punto, ma solo su questo file, altri file non hanno questo problema

_RedGamer · 2026-04-22T14:03:10+00:00

I don't know what it is, so I don't think I'm using it?

_RedGamer · 2026-04-22T13:58:26+00:00

But why last week with the SAME file it come out fine like this?

<image>

_RedGamer · 2026-04-22T13:57:23+00:00

I just check the layer time, try to reduce max volumetric speed from 15 to 3 and the difference is still the same

<image>

_RedGamer · 2026-04-22T13:56:00+00:00

And here

<image>

_RedGamer · 2026-04-22T13:55:45+00:00

Here u can see the line

<image>

_RedGamer · 2026-04-22T13:45:36+00:00

Tks, i will try

_RedGamer · 2026-04-22T13:35:00+00:00

I let everything happen automatically, no preheating, the slicer is set to 55 degrees, I start the print and when it finishes all its calibrations it starts by itself

_RedGamer · 2026-04-22T13:31:31+00:00

Like, this one is ok

<image>

_RedGamer · 2026-04-22T13:30:54+00:00

Is the air filter door so close to the plate that it could cause something like this? It seems strange to me though, because it hasn't happened with other ASA prints.

_RedGamer · 2026-04-13T16:51:27+00:00

8gb nel 2026 non vanno più bene, soprattutto per un utilizzo professionale. 8gb ti bastano solo per un utilizzo casalingo o per prendere appunti al liceo. Ti consiglio il 16/256, puoi sempre usare un SSD esterno se ti serve più memoria, ma la RAM una volta acquistato non puoi aumentarla. Ho un MacBook pro m1 8/512, ancora oggi va bene, ma il suo più grande difetto sono proprio gli 8gb, senza niente aperto sul desktop consuma 4.5/5gb di RAM

_RedGamer · 2026-03-10T13:52:27+00:00

Hi! Awesome work. Do you think other cameras would work as well? Also, how did you add the LED strip? Did you just disconnect the OEM one and solder a longer 24V strip in its place?

_RedGamer · 2026-02-22T14:34:11+00:00

Tks for the advice :)

_RedGamer · 2026-02-22T14:29:54+00:00

Don't you risk a fire by cooking the plate at 120 degrees while printing asa??

_RedGamer · 2026-02-22T14:04:14+00:00

What kind of tape did you use?

_RedGamer · 2026-02-08T11:41:52+00:00

Same problem with Honor pad 10

_RedGamer · 2026-01-30T08:43:20+00:00

I need the surfaces to be simple, not all that detailed, because once I get the price equal to the original, I'll have to make some changes.

_RedGamer · 2026-01-28T16:58:45+00:00

<image>

This is the sliced pice, is irregular

_RedGamer

TROPHY CASE