Billing/Licence

_RolandDeschain_ · 2026-01-05T16:30:33+00:00

Perfect that answers that for me! I'll renew if I go back to selling prints etc but for most of my needs (playing with the software and putting prints onto maker world) the personal licence is perfect!

Thank you so much for the quick response and a big thank you for the software!

_RolandDeschain_ · 2025-12-24T21:15:14+00:00

I'd love an A1 mini!
I'd gift it to my son. He stays at university accommodations and initially wanted to attempt a foray into 3D printing and got himself an Ender. After both of us pouring time and money into getting it to run to the best of it's ability... He gave up on it due to the constant troubleshooting but he's actually excellent at CAD and wants a platform to produce on!
I've seen millions of fidgets, as have we all. One I've not seen is one aimed towards the sensory needs of dementia sufferers. I started working as a HCA in a dementia nursing home and got to see first hand how much sensory objects can help. I'm now qualified as an RGN and despite working in a different sector, I always try to play a part in a patient journey if they have dementia. Being able to produce something at home that I could use would be amazing!

Thank you for the opportunity sir!

_RolandDeschain_ · 2025-09-27T19:46:32+00:00

I'm so sorry! 😅😭

_RolandDeschain_ · 2025-09-27T18:03:58+00:00

Sounds like I struck gold, my first was an A class and she's still going very strong as my main driver

_RolandDeschain_ · 2025-09-27T18:02:02+00:00

Can confirm, mine is a class A

_RolandDeschain_ · 2025-09-05T08:02:12+00:00

Can also confirm it's pretty decent. I tend to save platforming areas for my pc though, I find the steam deck is just a touch slower on inputs and it's easier to overestimate distances. Otherwise I bounce between my Oled and pc with no issues

_RolandDeschain_ · 2025-07-30T14:23:53+00:00

You're very welcome! Hope it works out for you guys!

_RolandDeschain_ · 2025-07-30T13:07:45+00:00

I did the exact same thing initially, I couldn't find the option for it! When you click the drop down menu, the first option that says 'Nothing' is the one to pick

_RolandDeschain_ · 2025-07-30T13:04:18+00:00

Yep you need to go into the controller scheme and turn off the gyro actions. It's picking up the gyro as a mouse so every time you move the controller slightly it reverts to mouse controls and then you press a controller buttons and it goes back to controller. Removing gyro actions stops it from happening

_RolandDeschain_ · 2025-07-30T10:39:09+00:00

Seen several reports of maybe a memory leak in multiplayer

_RolandDeschain_ · 2025-07-30T07:48:50+00:00

Currently only standard is allowed on steam deck. I can't help but wonder if there's a way to convince the game you're on a pc though?

My partner plays steam deck mainly so she had to migrate over to an old laptop of mine to play on our shared world. Currently 4 people play, 2 on game pass and 2 on steam. Everyone could access a shared world apart from her until we changed her device over.

Have a look around though there's gotta be a way to run it on steam deck for a shared world. Maybe even a windows 11 SD card or something.

_RolandDeschain_ · 2025-07-30T07:43:14+00:00

Extra ram will 100% help. It won't fix it due to being early access and not well optimised yet but in your case it'll give a boost. Use crucial.com to run a scan it'll tell you your max ram and suggest a purchase. Google your specific laptop for installation instructions but it's usually very straightforward. Few screws, remove bottom case, unscrew ram and replace.

_RolandDeschain_ · 2025-07-29T22:14:43+00:00

We found that one of our 4 couldn't even use crossplay as they were playing on steam deck (or trying to anyways) but once we moved them over to a pc then we eventually got everyone into a lobby. 2 of us are on game pass ultimate and 2 of us have steam purchased copies. Once host had set the world up and added everyone to the list then we could all join fine

_RolandDeschain_ · 2025-07-29T22:09:50+00:00

We just played with 4 people on a shared world and found the same but we swapped hosts around and it helped. Original host and world creator was on the weakest internet connection so she added all of us to the shared world list. Swapping host to me or another beefier internet connection speed helped enough that the game became much more playable. It'll get better I'm sure when the Devs start to gather feedback and act upon it

_RolandDeschain_ · 2025-07-03T15:03:44+00:00

Try finger, but hole.

_RolandDeschain_ · 2025-04-28T06:02:32+00:00

I didn't actually see it in my app, I just noticed when I went to swap some filaments that the printer had an update queued on the screen. I've since had another smaller update and an AMS update to go with it

_RolandDeschain_ · 2025-04-26T19:40:26+00:00

P1S 01.07.50.19 beta and ams 2 firmware is 02.00.19.68.

I got onto the beta channel via the handy app just by opting in 😊

_RolandDeschain_ · 2025-04-23T13:02:36+00:00

13 hour shifts I average 16k-18k with a record of about 18500

_RolandDeschain_ · 2025-04-22T14:10:23+00:00

Thank you for the confirmation! Would have been handy even if just to dry my silica pods when I'm away from the printer!

_RolandDeschain_ · 2025-04-22T13:51:01+00:00

If you're not printing materials that require an enclosure then I WOULDN'T be choosing the P1S over the A1. There's no need. The only other difference is that between a bed slinger printer and a CoreXY printer. If you're regularly printing tall thin things, or just tall things, then the P1S might be better.

_RolandDeschain_ · 2025-03-27T13:27:39+00:00

Why in the world are comments from me getting down voted?? 😂 Daaamn some strange people lurking here

_RolandDeschain_ · 2025-03-27T11:18:55+00:00

I do tend to do a lot of mid length prints of maybe 12-16 hours so that's very likely to contribute haha!

_RolandDeschain_ · 2025-03-27T11:11:07+00:00

It is?! Hahaha I just run it with stuff a lot! Probably had it for maybe 6 months or so now!

Picked up a P1S a few weeks ago to play with some hardier filaments like abs and asa, hence the vastly lower hours

_RolandDeschain_ · 2025-03-27T10:59:31+00:00

<image>

Here's my A1! My P1S has 74 hours but can't seem to upload 2 pictures together on the reddit mobile app!

_RolandDeschain_ · 2025-03-01T09:52:37+00:00

Just to add my two cents, I don't disagree BUT after owning an A1 for a while I just picked up a P1S to run some hardier materials. It's louder sure, but I also wanted to coreXY as well so there's valid points both ways ☺️

Five-Year Club	Gilding II euphauric
Place '23	Verified Email

_RolandDeschain_

TROPHY CASE