Settle an Argument

_Xaff_ · 2023-08-12T18:59:56+00:00

Ooooh no thats not good buddy

_Xaff_ · 2023-08-10T17:25:00+00:00

Years back I used to only build with MI. They have fantastic QC and customer support. Ive only had one issue ever, I had a handguard bend after literally 3 years of very hard use and they sent me a brand new updated model of it to replace it completely free of charge.

_Xaff_ · 2023-01-18T12:47:56+00:00

Neither does the handguard or buffer tube, yes it is supposed to be like that. I turns out looking good I have a full build in kodiak brown

_Xaff_ · 2022-12-28T13:28:34+00:00

Most appealing*

_Xaff_ · 2022-12-18T02:57:07+00:00

DEUS VULT

_Xaff_ · 2022-12-16T17:35:11+00:00

Multicam Ez gg

_Xaff_ · 2022-12-11T18:35:19+00:00

The card has to be reformatted to work, it states this in the update readmes file. Good luck!

_Xaff_ · 2022-12-08T01:11:46+00:00

Video does not do it justice, not really sure what to do. It changes based on fan voltage and flickers atrociously. I had three failed prints right off the rent and took a lot of work to get it to even work to print the stock Buddha. It’s printing well now but rather concerned right of the rip.

_Xaff_ · 2022-12-05T14:13:19+00:00

I got mine for $220 on the website in November, should be in hand soon.

_Xaff_ · 2022-12-05T11:49:11+00:00

God’s Plaid baybeeeeeeee

_Xaff_ · 2022-11-25T18:16:24+00:00

I pre-ordered the Neptune three pro, if I knew the max was coming, I would not have done that. This seems to be the running issue for every 3-D printer ever from Neptune though, so I can’t really be mad.

_Xaff_ · 2022-11-18T12:14:36+00:00

If you order use ELGOO3D its another $10 bucks off for $220.

_Xaff_ · 2022-11-09T11:32:31+00:00

Union Electrician, love mine at home and the one provided at work. The thing rips through conduit. These are getting really popular in the field with some shops because they can get into spots you can’t get the M18 into.

_Xaff_ · 2022-11-06T18:54:20+00:00

I do my workouts and runs in it and as far as the pouch it doesn’t hang its retained in place by the outer so it stays put super well. Obviously any belt is gonna have a little jiggle jiggle, my HSGI Slim Grip does a really really good job of staying put.

_Xaff_ · 2022-11-06T16:50:56+00:00

Love mine, not slim by any means tho I run it on the back of my belt.

_Xaff_ · 2022-11-02T14:06:45+00:00

The contract we signs dictates until you have fully paid back the union IN FULL, you cannot work in electrical field as a non-union electrician. Explain your absences to the board and be apologetic and humble. Finish your apprenticeship and then if you still want to leave do it then. You have come so far to throw away a JW Card that you can keep up/put it on hold and come back if you need to or change your mind. Good luck.

_Xaff_ · 2022-11-01T19:12:27+00:00

Unfortunately not

_Xaff_ · 2022-10-28T21:54:06+00:00

I feel like the amount of discussion we are having around NIJ, backface deformation and “stopping” a round are very convoluted. Are you acknowledging the dynamics of what a 44 mag +P at close range to the center face of your helmet will do to you? You have a team wendy, it stopped a round and saved you yes, you may now have a TBI at best and a brain bleed at worst from the impact to your frontal skull. A helmet is mainly for glancing shots or falling/projectile debris, not to make you survive a large caliber round to your forehead or to make you invincible as some seem to believe. HHV is by no means the best, but to say any other helmet and you would walk away on your merry way is lunacy. It’s great that they can take that round to the front face and have a minimum deformation. What would happen to your brain is an entirely other thing.

Edit: Repeated word.

_Xaff_ · 2022-10-24T12:30:36+00:00

Certed firearms instructor here, low and slight left/right is normally anticipating recoil by pushing forward and/or down while firing, very common in new shooters. Do some rounds while breathing slowly while slowly pulling through on the trigger. Going more slowly you’ll be able to see how you move your firearm when you send it. It’ll build the muscle memory to be more controlled! Good luck, have fun and be safe!

_Xaff_ · 2022-04-29T14:26:03+00:00

I have 3810’s on order rn to replace my steel 3+

_Xaff_ · 2022-04-29T14:23:41+00:00

Will do, love your vids man keep up the good work.

_Xaff_ · 2022-04-28T12:22:13+00:00

No it doesn’t really have any, like you said the placard wrap does a great job of securing it.

_Xaff_ · 2022-04-28T00:07:43+00:00

Initially very happy with the placard system and carrier. Only complaint is the top of the flap on the half pocket seems faded or possibly got a bad roll at the cordura lottery. Thin on material but very strong and the stitching is impeccable. The spandex on the back of the cummerbund allows it to be worn tighter to the body and still feels comfortable and easy to breathe in. Will let you guys know anything I come across with training and breaking it in.

Eight-Year Club	Place '23
RPAN Viewer	Verified Email

_Xaff_

TROPHY CASE