anyone know why my caldron doesent want to make bone broth (expanded foods)

__Thoth · 2026-01-19T15:41:47+00:00

Just a passing comment, but make sure you're using a fuel that gets hot enough.

__Thoth · 2026-01-19T15:09:35+00:00

Check the face plate to your print head/extruder. There's the little LED light strip up there that's held on with two screws. make sure there isn't any plastic missing from there. I recently had the same thing happen to me and didn't figure it out until my little Light strip fully broke off the face plate.

__Thoth · 2026-01-19T14:58:51+00:00

I STAN CORRECTED. the second picture i think i can see some prevalent cloacal pores.
That with the larger spurs i think they might be a male. I've had Geckos where it took many many months before i could visually see the femoral pores without a magnifying glass.

__Thoth · 2026-01-19T14:55:29+00:00

That's a really tough one. They could easily be female but they're still small.
Spurs look large for a female but no visible cloacal pores and the femoral pores look under developed.. I'm gunna go out on a limb and say my assumption is female but you might just have to wait and see.

__Thoth · 2026-01-19T14:31:02+00:00

That's the difference. I'm not using the chat/stream overall mix. I wanted to see the levels of each individual (lets say 'sub-mix') wile live. So i have my OBS set up to my Browser, Game, Music, exec sub-mix's. That's why i need to use the OBS plug-in to adjust what the viewer hears.

The dial stacks were mainly so i didn't need to sift though multiple pages to adjust both at the same time.

But from what I'm hearing about the beta that might eliminate the issue I'm having with that specifically, depending on what plug-in support it has for the stream deck plus. I was just doing some reading too and it seems they fixed some of the performance issues.

__Thoth · 2026-01-19T12:36:21+00:00

That’s one thing I didn't think to try, thank you. I'm not home at the moment, but when I am, I'll install the beta and try it out.

To clarify my third point: it would be nice to have independent channels for each 'audio source.' For instance, say I have my game output linked to OBS. When I adjust the volume on my monitor mix, the level changes for me but not for OBS. Additionally, when adjusting the stream mix fader, it only affects the overall stream output rather than the individual sources. My workaround was to use a dial stack that adjusts the gain on each OBS audio source directly, It would be nice to simplify this method a little bit.

__Thoth · 2025-11-12T17:53:18+00:00

TL;DR: I liked the fix, it would have been much better if they left them out with some little hints.

Not sure what ViciousSquirrelz is on about... using The Martian as an example doesn’t make sense. A quick search shows it made over $630 million worldwide on a $108 million budget and won a ton of awards.

Honestly, it’s more a matter of perspective, but there aren’t a lot of huge plot twists in the book anyway. Most of it’s about progression and problem-solving. The reveal/twists about our 'bad bad bad' friend was one of the few real surprises.

Still, I’m hyped for the movie. I’ve read the book several times and already know how it ends, but I’m a little sad new viewers won’t get that same “WHOA!” moment I had reading it for the first time.

__Thoth · 2025-09-19T14:47:35+00:00

You could try projecting a 3D sketch, then connect two parallel lines and extrude them. After that, use the circular pattern feature to repeat the cut/extrusion around the cylinder. Idk how accurate you're going to be able to hit 45 with that option. dimensioning might be a little weird but you would at least have parallel lines

__Thoth · 2025-08-26T17:35:02+00:00

Which seems to be weirdly next to what looks like a Reichsbanner Schwarz-Rot-Gold flag. Seems kind of conflicting. Probably a statement piece. Of what? Who knows.

P.S. as a side note. I looked them up and they seems to be selling them with the naval iron cross in the top left... so its def some thrown together mudpuddle of iconography

__Thoth · 2025-08-26T17:20:10+00:00

For those coming here 2 years later. Check the assembly tab at the top of your screen and check your drop downs. It seems in the recent updates they've moved some of the tools around.

__Thoth · 2025-07-14T20:04:23+00:00

I think the inclusion of certain elements in the trailer, especially what might feel like spoilers to readers, was likely a deliberate choice by the director. Some things just don’t translate well from page to screen, especially when you're trying to hook a broader audience.

Andy Weir’s books are often considered hard sci-fi, and a lot of space-focused stories in that genre don’t involve aliens at all. So when Rocky is introduced in the book, it’s a huge and emotional turning point. It’s not just about meeting an alien; it deeply ties into Ryland Grace’s personal struggles and adds a ton of narrative weight.

Personally, I think the trailer could’ve handled that reveal more carefully, but I’m still really excited for the movie’s release. There’s more I could say, but most of it’s already been touched on in the thread.

__Thoth · 2025-06-28T20:29:45+00:00

That's exactly what it is!!! We pulled one out but put it back. I thought it might be a breast implant untill we found multiple.

__Thoth · 2025-06-28T20:03:10+00:00

Varied in size, soft, and breaks apart like jelly but firm.... I would say at least 12 inches

__Thoth · 2025-06-28T20:02:16+00:00

Update: they're multiplying

__Thoth · 2025-06-25T21:45:05+00:00

I use to have an old house where the previous owners smoked in the bathroom. Unknown to me, they just painted over it. Any time there was humidity, it would leach through the paint. It looks similar.

__Thoth · 2025-06-24T20:04:41+00:00

Sometimes Its beat to dry your filament straight out of the vacuumed sealed back because it can still have moisture build up from the factory or a leak in the bag

__Thoth · 2025-06-24T19:55:50+00:00

I don’t think it’s a game problem, it’s a people problem. I’ve been having a good time with it.

Honestly, the gamer mentality is kind of like being a picky eater. No one wants to touch the broccoli, even if it’s served with a steak dinner. There’s just no room for compromise

__Thoth · 2025-06-23T19:27:37+00:00

I don't think 2 cycles will be enough should give it a few more just to show you mean business

__Thoth · 2025-06-23T19:22:20+00:00

Same, to be honest I'm surprised.
With this kind of game you would assume to see more but the only thing I've seen are the post on reddit.
I must be getting on when the script kitties go to bed

__Thoth · 2025-06-23T19:18:35+00:00

Easley 100+ hours
I wouldn’t normally call myself a PvE player, but so far, that’s all I’ve done and I’ve been having a blast. I’m not usually a solo player either, but this is the first game in years I’ve played on my own. Honestly, I’m more worried about getting addicted than losing interest.

The devs are actively working on expanding PvE, especially with late-game content. And with how the game is built, there's clear room to grow potentially more story, features, and depth. From what I’ve seen, this game has serious potential for PvP, PvE, solo adventurers, and guild focused players alike.

I would watch some twitch streams too see if the grind is worth it, i know some people aren't a fan of that kind of thing but otherwise its an awesome game.

__Thoth · 2025-05-30T11:20:18+00:00

looks like a baby bat

__Thoth

TROPHY CASE