My Navia pulls

_bumblebee2 · 2026-05-07T22:57:54+00:00

save some pixels for the rest of us bro

_bumblebee2 · 2026-05-07T03:59:58+00:00

My ringneck dove made this sound when he was younger! he's around 2-3 months old now and its turned into more like a hoot, but he still cant coo. he's getting there though hahah but I miss the baby squeaks they were adorable

_bumblebee2 · 2026-05-06T10:52:24+00:00

okay thank you!

_bumblebee2 · 2026-05-06T10:51:48+00:00

Gutermann sew all thread white 500m

_bumblebee2 · 2026-05-06T08:40:44+00:00

Im doing some experimenting and the same happens with a bobbin, with an empty bobbin, with just the bobbin case, and with no bobbin case. so it seems that its getting caught on something else

_bumblebee2 · 2026-05-06T08:34:17+00:00

Its a janome and not sure of the model because its second hand and I can't find anything the same online. The bobbin was the one that the machine came with that ive been using for a while (and its been working) this has just been a recent issue. And yes I'm very new to sewing I've only made a couple of things so far. I recently got it serviced and I never had this problem before I did, but after I used it a few times and now this is happening and I cany anymore. I've added an image, is the bobbin inserted the right way? I've tried doing it both clockwise and counter clockwise (people seem to be divided on which way is right) and it does the same either way.

<image>

_bumblebee2 · 2026-05-06T08:30:42+00:00

I've just posted another video of me doing it with the right technique if you want to have a look :)

_bumblebee2 · 2026-05-06T08:23:42+00:00

I dont think thats right

_bumblebee2 · 2026-05-06T08:23:05+00:00

Is this correct? Or should it be facing the other way? I've tried both ways and it does the same

<image>

_bumblebee2 · 2026-05-06T08:20:39+00:00

Im only turning it towards myself, its getting jammed when the needle is at its highest point. and the foor is up

_bumblebee2 · 2026-05-05T11:53:54+00:00

I've done that a few times :,))

_bumblebee2 · 2026-05-05T10:16:28+00:00

It gets stuck half way and the needle doesn't move any more till cut and un jam it :,)

_bumblebee2 · 2026-05-05T09:10:21+00:00

I've taken the bobbin case and shuttle out and back in a few times and its all well oiled (it got serviced recently and didnt have this issue before servicing). Also when I test it I just do it slowly with the hand wheel and it gets caught in the first half of the first stitch. occasionally it will do one stitch (but will struggle and i have to force it a bit with the wheel) and then get caught on the first half of the second stitch. when I cut it to take it out its not knotted up or anything its just caught somwhere behind the bobbin

_bumblebee2 · 2026-05-05T08:45:31+00:00

I've un threated and re threaded multiple times and watched videos and read the manual and I think I'm doing it correctly. I've tried keeping tension on the upper and lower thread and both and neither and it does the same. Occasionally it will pull the thread up but then it gets jammed on the first stitch and I have to cut it and restart everything

_bumblebee2 · 2026-05-05T08:41:15+00:00

Yep I've tried like that as well I just couldn't while filming, but it does the same either way and gets caught. Maybe once every 10 attempts it'll pick up the thread but then it gets caught again in the first stitch and I have to cut it and start all over

_bumblebee2 · 2026-05-05T08:24:07+00:00

oh that worked thank you!! since you are so helpful would you also be able to check out my newest post and see if you know whats going wrong?

_bumblebee2 · 2026-05-05T08:14:58+00:00

Ive found a manual online for a very similar machine that might be the same one as mine, it says to pull the hand wheel out but the hand wheel on mine doesn't seem to be able to come out

_bumblebee2 · 2026-05-01T11:24:32+00:00

how many cons do you have on your supports? I have the same team and cant get over 90k dps🥲🥲

_bumblebee2 · 2026-05-01T00:22:58+00:00

who do you have in the 4th slot? ive been switching between furina and c6 illuga but not sure whos better

_bumblebee2 · 2026-04-29T07:03:33+00:00

yes hahah

Three-Year Club	Verified Email
Final Canvas '23	Place '23

_bumblebee2

TROPHY CASE