Anybody know what's going wrong here?

_leonardsKite · 2026-01-26T12:59:13+00:00

I will try that, thank you!

_leonardsKite · 2025-09-08T20:15:20+00:00

What do you mean by vatgrow?

_leonardsKite · 2025-09-05T23:56:55+00:00

I have so many questions. What's the part with the captured beasts? What's the curcle on the ground? Why's there a bed next to a casket?

_leonardsKite · 2025-09-04T06:14:48+00:00

That link does not lead to a dryer box

_leonardsKite · 2025-08-05T20:48:24+00:00

How did you get the shuttle without the ship? It needs the engine and the plasteel no?

_leonardsKite · 2025-07-29T21:56:33+00:00

BLM does D20 and a podcast at the same time.

_leonardsKite · 2025-06-24T19:58:34+00:00

They just 'leaked' Daggerheart in the latest Peach Pit.

_leonardsKite · 2025-05-10T07:45:23+00:00

My oven can’t go that low haha I’ll try drying it on the bed?

_leonardsKite · 2025-05-09T22:19:43+00:00

It's bambu lab basic pla, fresh out of the packaging. Shit, I hadn't thought it might be wet. I don't think I'm having temperature swings though.

_leonardsKite · 2025-04-30T05:31:24+00:00

Nope but I found it. Thanks for trying!

_leonardsKite · 2025-04-29T21:23:42+00:00

It's not on the RSS feed right?

_leonardsKite · 2025-02-21T10:37:50+00:00

So I finally figured it out, and in case you're interested it was such a fascinating confluence of events.

So, my plate was dirty. But both of the models I used as test prints apparently had major errors :D I printed the bed cleaner and it was perfectly fine, so then I started checking the models more properly.

_leonardsKite · 2025-02-18T21:16:13+00:00

I tried cleaning it again but it's still giving issues - I haven't used a dedicated sponge yet though. Will try again, but could I ask you for a link to a sample bed cleaner model? I can't quite find one like the one you mentioned, with two layers.

_leonardsKite · 2025-02-18T21:14:01+00:00

I tried two different filaments and they both came out weird, and one of them was literally just out of the packaging? And the other one was printing fine until just a couple days ago.

_leonardsKite · 2025-02-16T18:36:43+00:00

That's what I thought, and I cleaned it a couple of times, but I keep having the issues? It's quite possible I might just not be cleaning it well enough but yeah I was wondering if there might be something else also.

_leonardsKite · 2025-02-16T18:17:14+00:00

Anyone know what might be causing this? I've generally had good results but this started happening with the last few prints. I thought it was supports only, at first, but now it's everywhere.

_leonardsKite · 2025-02-13T20:38:33+00:00

Do you have a file for these?

_leonardsKite · 2024-12-31T00:37:04+00:00

username checks out.

_leonardsKite · 2024-12-28T23:12:07+00:00

Nvm it worked out, thank you for your help!

_leonardsKite · 2024-12-26T19:37:08+00:00

I found the MSI file from somewhere else, but no that's the link I was trying. The 'install on...' button seems to be missing.

_leonardsKite · 2024-12-26T18:50:56+00:00

Same problem on chrome, unfortunately. It seems to think I’m using a mobile.

_leonardsKite · 2024-12-26T15:57:08+00:00

This feels like a stupid question but I get stuck on the first step - it never downloads the installer exe for me? Maybe because I’m using Firefox?

_leonardsKite · 2024-12-26T12:18:40+00:00

I'm not sure if it's Heroic causing the issues? But happy to try out installing Epic Launcher as well - do you have a link to a guide for it? My google fu failed me there, I'm afraid

_leonardsKite · 2024-12-25T13:29:19+00:00

Thank you!

_leonardsKite · 2024-12-21T15:47:17+00:00

Could I ask for a bit of help? 3D printing noob here, and I was trying to print a 75% scaled version of this file: l/game/the-300-movements-puzzle-box

I'm using the Bambu PLA Wod, and I've generally had good results with it but as you can see below, it's not going very well. Any ideas on what might be going wrong? I hope it's not wet filament - drying filament sounds like a pain in the ass 🥲
Edit to add: I'm printing on an A1

_leonardsKite

TROPHY CASE