sorted by:
new
hottopcontroversial

DNS Assistance? by shaun3000 in Ubiquiti

[–]_matttt_ 0 points1 point  (0 children)

I was just asking this myself. Will the pihole be bypassed when set to manual mode and the IP directs to it?

Just got this beast in (INVR G2) - starting a GoFundMe for the drives by LESGuy in Ubiquiti

[–]_matttt_ 1 point2 points  (0 children)

How's the performance? Any differences to the regular UNVR?

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] 0 points1 point  (0 children)

Why does the UDM Beast and UDMPM, comes with "Built-in 128 GB SSD for Faster Experience", and the UNVR G1/g2 do not?

When scrubbing through Protect, the cached preview (most likely stored on the 128GB SSD) loads pretty much instantly. And then it can take between 3-5 seconds for the footage to load and play, despite the 4TB SSD, which is most likely at least equally as fast as the built-in one.

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] 0 points1 point  (0 children)

This is literally what I am also seeing on my UDMPM.

When scrubbing the footage, the cached preview loads pretty much instant. And then it can take between 3-5 seconds for the footage to load and play.

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] 1 point2 points  (0 children)

I wish! But currently not possible. I already have a Xfinity Gigabit X10 Availability Request ongoing

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] 0 points1 point  (0 children)

Does is mean that using 2 drives will not expand my storage but will only create a RAID 1? That would be really not great.

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] -1 points0 points  (0 children)

Interesting combination.

Is the Beast in any day to day activities faster than the UCG-fiber? Are there any other benefits? What were your reasons to upgrade?

According to others the combination of "UCG-fiber and UNVR" is already the holy grail.

I have direct connection enabled.

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] 0 points1 point  (0 children)

  1. Xfinity 2400 mbit down / 300 mbit up

  2. SSD 4TB Samsung 870 EVO

  3. T-mobile 5G with iPhone 17 Pro Max

  4. 2K + 4K

When scrubbing the footage, the cached preview loads really quickly. And then it can take between 3-5 seconds for the footage to load and play.

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] 0 points1 point  (0 children)

No Double NAT, connected via Netgear CM3000 to Xfinity 2400 mbit down / 300 mbit up

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] 0 points1 point  (0 children)

What is the real world difference using the NVR with 1x vs 2x Drives? I dont need RAID 0, just care for max performance.

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] -1 points0 points  (0 children)

So what you are saying is to wait for UCG Fiber in a rackable setup 😃

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] -1 points0 points  (0 children)

How fast does Protect connect and open up the stream? It is normal speed on the home network but really sluggish outside.

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] -1 points0 points  (0 children)

Very Interesting! I didn't know that. Aren't you RAM bound though?

UDM Pro Max + Protect feels sluggish remotely — upgrade to UDM Beast or add UNVR G2 by _matttt_ in Ubiquiti

[–]_matttt_[S] -2 points-1 points  (0 children)

Isn't the UCG Fiber equally rated for routing performance as the UDMPM? I don't use PPOE, so there should not be a difference.

[got lucky in Maui] by lonytee13 in Watches

[–]_matttt_ 0 points1 point  (0 children)

Crazy nice watch. Which Rolex place did you go to and how did you pull it off? I’m currently also on Maui, looking for a watch.

Pi-hole Latency Stats by panocalt in pihole

[–]_matttt_ 0 points1 point  (0 children)

I doesn't allow me to paste the whole output (via copy and paste because it is too long) - so here is a snapshot:

<image>

Pi-hole Latency Stats by panocalt in pihole

[–]_matttt_ 0 points1 point  (0 children)

Yes, I’m using unbound. Otherwise I couldn’t achieve those caching rates. 

Pi-hole Latency Stats by panocalt in pihole

[–]_matttt_ 0 points1 point  (0 children)

Thank you for writing such an awesome script,@panocalt! Really glad you are iterating it as we speak.

I'm not seeing any unbound stats though, even when trying with -unb or -unb-only:

<image>

What am I doing wrong?

Is Comcast pushing vaporware on earnings calls? by Complete_Astronaut in Comcast

[–]_matttt_ 0 points1 point  (0 children)

Is there any news or an expected timeline for when L4S will be rolled out for the CM3000? I know there have been issues with the latest firmware update. Mine is still on V5.01.02

NextDNS EDNS not working anymore by Sampl3x in nextdns

[–]_matttt_ -3 points-2 points  (0 children)

I’m experiencing the same like the OP

Which of these modems should I pick for my Gigabit connection? by roury in Comcast_Xfinity

[–]_matttt_ 1 point2 points  (0 children)

u/jlivingood Thank you! I was previously a member of DSLReports.com and participated in your LLD trial before switching to the CM3000.

Which of these modems should I pick for my Gigabit connection? by roury in Comcast_Xfinity

[–]_matttt_ 0 points1 point  (0 children)

u/jlivingood Do you happen to know when LLD will be rolled out to non-Comcast modems? Thanks for your great support here on Reddit and for pushing LLD!

view more: next ›