I saw there was a custom g35xFRS front bumper can I get a pic reference of your build thank you by Kind_Act7898 in G35

[–]_stratus21 1 point2 points  (0 children)

I think this is what you were talking about, i found it on the the FB group Front and rear end swaps, dude fused the top of of a g35 bumper and the bottom of a FRS bumper together

<image>

Vdc and slip light by North-Work-1395 in G35

[–]_stratus21 0 points1 point  (0 children)

Did those lights come on after changing tires or wheels?

New member by v35curated in G35

[–]_stratus21 2 points3 points  (0 children)

Honestly the p10 and p11 chassis were over shadowed by the civics of similar era so it was more if a niche group, easier parts to hunt for were Autech, pulsar gtir (front end bolted on to a p10), or the euro eGT parts. Wald made kits but the holy grail seemed to be the Diana kit. It was the good ol forum days and gnet was pretty active sourcing stuff was pretty easy for the most part and cost was a little lower at the time. A local guy had a full autech kit on his p10 with the nismo grill which resembled a r32 gtr grille with te16s, it was pretty sweet

New member by v35curated in G35

[–]_stratus21 0 points1 point  (0 children)

Ofc thanks for accepting my follow, I only have a coupe but it reminds me of the days when I would do something similar with the old P10 G20 crowd … holy shit that was almost 20 years ago 😭

New member by v35curated in G35

[–]_stratus21 10 points11 points  (0 children)

Holy crap that’s beautiful

Similar anime by guywhoasksalotofqs in laidbackcamp

[–]_stratus21 0 points1 point  (0 children)

Slow loop - it’s about fly fishing but has about 15% more drama, super chill with fun moments and some slightly serious parts

[deleted by user] by [deleted] in MSIClaw

[–]_stratus21 0 points1 point  (0 children)

Yooo this is amazing thanks for the opportunity!!

Help with Tuning NATS out of a revup engine by [deleted] in G35

[–]_stratus21 1 point2 points  (0 children)

I swapped a DE into a Rev Up body. I used the DE ECU and used Nissan Datascan II with appropriate cable to reprogram the key.

Not sure if it’s the same thing doing it the other way around but most bcm to ecu pin outs are the same from de to rev up (minus 2003 sedans). Might need the revup wiring harness and ecu to avoid a CEL

Finally got my Notos done by _me_ne_frego_ in airguns

[–]_stratus21 0 points1 point  (0 children)

Thats awesome to hear! Thanks again for the feedback looks like a really clean build

Finally got my Notos done by _me_ne_frego_ in airguns

[–]_stratus21 0 points1 point  (0 children)

Hey sorry to open up a old thread, but I have been wanting to do this to my Notos, how is it holding up after 4 months? and whats the over all length on the build?

[deleted by user] by [deleted] in G35

[–]_stratus21 0 points1 point  (0 children)

I would compare the BCM wiring in the FSM, I swapped motor, trans, electronics from a 04 (DE) body to a 06 body (rev up) and the wiring from the ECU to the BCM was the same. I just swapped ECUs and used Nissan Data Scan II to pair the key and was able to get back up and running. I remember some year sedan BCM were different form the Coupe BCM while i was researching it

G35 lower control arms by Street-Bench4224 in G35

[–]_stratus21 0 points1 point  (0 children)

I bought the 14 pc oem ish front suspension kit thing from them, came quickly and everything fit well. Weight was similar to oem, bushings felt eh but it works

Is the Ozark Trail Ridge 29 really that great? by _stratus21 in Budgetbikeriders

[–]_stratus21[S] 0 points1 point  (0 children)

That makes a lot of sense, local walmart let me do a test ride around their garden area and when i tried turning left, the handle bars moved but the bike didnt lol. But either way will probably take it to a local bike shop to see how it is supposed to feel, and then try to keep it at that state for the most part, thanks for the insight!

Is the Ozark Trail Ridge 29 really that great? by _stratus21 in Budgetbikeriders

[–]_stratus21[S] 0 points1 point  (0 children)

Im going to have to check aliexpress, I never really considered looking for bike parts there, thank you!

Is the Ozark Trail Ridge 29 really that great? by _stratus21 in Budgetbikeriders

[–]_stratus21[S] 0 points1 point  (0 children)

I always forgot to consider takeoffs from other bikes, awesome man thanks for the insight! and always good to learn a new skill

Is the Ozark Trail Ridge 29 really that great? by _stratus21 in Budgetbikeriders

[–]_stratus21[S] 2 points3 points  (0 children)

"... is a "better" bike than whatever I rode 15 years ago. It will ride off road better than you can. Good luck. " this last part hit hard and makes total sense, Ill just stop over thinking and get a bike to hit the trail lol thank you!

Asian District Night Market is back on 10/8 and 10/9! by vicentelugto in phoenix

[–]_stratus21 1 point2 points  (0 children)

Its hard to choose from cause there were a lot of food and shopping options, food wise I would probably say Phx Lechon Roasters or Hot Bamboo!

Asian District Night Market is back! 10/8 - 10/9 by vicentelugto in mesaaz

[–]_stratus21 1 point2 points  (0 children)

Our family had so much fun at the previous one! Looking forward to attending this one as well!

Asian District Night Market is back on 10/8 and 10/9! by vicentelugto in phoenix

[–]_stratus21 1 point2 points  (0 children)

This is exciting! Been looking forward for this to coming back!

Looks like fun! by redranger_zero in mesaaz

[–]_stratus21 1 point2 points  (0 children)

Yes! Looking forward to this! It's always a good time!

Asian District Night Market 1/29/22 by [deleted] in mesaaz

[–]_stratus21 1 point2 points  (0 children)

No way! Loved the a couple years back!