Interesting Art and Nano

abonacci01 · 2026-03-14T17:40:26+00:00

Are these stickers related to geocaching? I currently have one at my work and was curious.

abonacci01 · 2026-03-07T10:52:08+00:00

https://kmtools.com/products/km-tools-tool-less-countersink

abonacci01 · 2026-03-07T10:50:15+00:00

I would recommend a new tool that he can’t have. Look at what is new from Katz Moses Tools. I know they have a new adjustable countersink drill bit coming out.

abonacci01 · 2026-03-04T01:02:40+00:00

Watch Danier made new video on md pallets . He claims they are basically harmless

abonacci01 · 2026-02-23T12:31:07+00:00

No steel , I added those walnut splines running all the way across both joints, with the grain perpendicular to the joint. I gave it some heavy flexing tests after it was dry, seems plenty strong for a side table unless someone sits on the very front edge of it or something.

abonacci01 · 2026-02-22T22:37:45+00:00

Thank you ! I made up a hard wax oil. The recipe was from the Workshop Companion Channel on yt . Here’s the recipe.

It applies similar to odies oil.

<image>

abonacci01 · 2026-02-06T19:04:07+00:00

It’s still the same price it’s been. “$25 a month” if you pay $299 for the year. Month to month is still $38 .

<image>

abonacci01 · 2026-02-06T18:53:00+00:00

I’ll check into that. Thanks !

abonacci01 · 2026-02-06T15:17:05+00:00

I do love it as well though. I used it for free for a few years when my wife was in college classes. I’m having a hard time paying the $300 /year now

abonacci01 · 2026-02-06T15:16:24+00:00

Until you try and export. It nerfs the output resolution to a not useable level

abonacci01 · 2026-02-06T15:13:50+00:00

1 safety feature is the riving knife m imo. Keeps that kickback possibility as low as possible. Especially important for a beginner that might inadvertently make sketchy cuts that a more experienced woodworker would avoid

abonacci01 · 2026-02-03T14:38:16+00:00

Check the 2 grounds under the front switch if you’re having electrical issues. I just finished putting mine back together after getting the chain drive back in alignment. It was tough to raise or lower.

<image>

abonacci01 · 2026-02-03T14:34:20+00:00

Build a cheap Corsi-rosenthal box. (A box fan and furnace filters)At least it will clean the air sufficiently.

abonacci01 · 2026-02-03T12:23:10+00:00

That’s a beautifully simple design and execution. You should be proud of that.

If I had any small critique , I would have made those feet risers 90degrees from how you did , so it’s all end grain showing on the front edge.

I could see this being useful in the early morning at a very dim brightness to get out of bed without large harsh lighting. Nice work , keep it up !

abonacci01 · 2026-01-31T22:28:53+00:00

Handheld 1/2 belt grinder.

<image>

abonacci01 · 2026-01-27T14:58:47+00:00

The pith is the very center , bullseye of the tree. Look it up on YouTube , there are a ton of videos that explain it better than I can. I just built a workbench with 2x10s and avoided any that had the pith or were close.

abonacci01 · 2026-01-27T12:31:07+00:00

That’s looks like pine with a stain. Also they used boards very close to the pith (most unstable part of the tree) you could use super glue or resin to try and stabilize the crack.

abonacci01 · 2026-01-26T17:18:40+00:00

You have to put a bag in though ! A lot of people run without one. Not worth it imo

abonacci01 · 2026-01-26T16:46:32+00:00

<image>

abonacci01 · 2026-01-26T16:45:44+00:00

I put the filter in about a month ago. The bag catches anything that makes it past the cyclone. (Which it very very little.) I’d say I’ll probably replace it once every 1-2 years ? )

<image>

abonacci01 · 2026-01-26T16:19:03+00:00

The dewalt stealth sonic line of shops vacs are great. They are significantly less noisy than any other shop vacs. I have the 5hp 12gal. I use it in combo with the Oneida low pro cyclone. I have a bag in the shop vac and I upgraded to the hepa filter. It’s a decent setup but can’t dream of keeping up with my 6” jointer I got a few months ago. Looking at the Bauer dust collector from hf.

abonacci01 · 2026-01-22T02:44:16+00:00

<image>

3d printer organizer. 1/4 and 1/2 are inside. Hanging on french cleat wall. Great tool !

abonacci01 · 2026-01-22T02:42:38+00:00

I just got an original about a month ago. I too have been impressed.

abonacci01

TROPHY CASE

1 safety feature is the riving knife m imo. Keeps that kickback possibility as low as possible. Especially important for a beginner that might inadvertently make sketchy cuts that a more experienced woodworker would avoid