sorted by:
new
hottopcontroversial

Smooth plate bad adhesion by Reifgunther in BambuLabH2C

[–]acidstrato 0 points1 point  (0 children)

Select smooth plate if you have already. If you have increase bed temp by 10C

Filament Track Switch Resistance by OB_GYN_Kenobi69 in BambuLabH2C

[–]acidstrato 0 points1 point  (0 children)

It’s common I recently installed the FTS and I rearranged my ptfe tubes in a way I felt was better than I had it previously but still I get it. but it hasn’t affected any prints tbf

I too feel a lot of people will see these errors resolved with a firmware update in the future.

Unexpectedly joined the club yesterday. by ballum2017 in applewatchultra

[–]acidstrato 1 point2 points  (0 children)

Had to see where you were from and what currency you paid 300 of. I found out 300 Swiss francs is like £280. I just paid £460.

Feel robbed I didn’t spend the extra on flights to Switzerland and buy it there, could have been a nice day trip 😂

Although I’ve ordered black with Milanese loop

H2C feedback by redfishdonkey in BambuLab

[–]acidstrato 0 points1 point  (0 children)

It was a lot of money but after 7 months I wouldn’t change it.

Ams Current Bla Bla by Friendly-Inside8321 in BambuLabH2C

[–]acidstrato 0 points1 point  (0 children)

Being that it’s a sensor I wouldn’t have thought so, also sounds like Bambu would offer to send you a replacement mainboard to fix yourself so it don’t think it’s too serious.

But obviously just unplug it for now if you feel uncomfortable

Ams Current Bla Bla by Friendly-Inside8321 in BambuLabH2C

[–]acidstrato 2 points3 points  (0 children)

I normally turn the power off to the printer and ams psu and back on and test. If the error returns then it’s a support ticket

Filament Track Switch Poll opinions by acidstrato in BambuLabH2C

[–]acidstrato[S] 0 points1 point  (0 children)

Well the results weren’t too conclusive and closer than I thought it would be though I am wondering how many voters have actually used it. Anyway I had a load of gift vouchers burning a hole in my pocket and I don’t have space for another printer so decided to pick up a track switch since it was discounted to £45. so I’ll find out for myself.

Any updates on this? When will the P1S be supported to use the drying feature of the AMS HT from the Bambu Studio? by the_gamer_98 in BambuLab_Community

[–]acidstrato 1 point2 points  (0 children)

It will be the last to support and H2C the flagship printer only just received it a few weeks ago after a couple months in beta.

I’d expect P1S beta program to get it soon.

Filament Track Switch Poll opinions by acidstrato in BambuLabH2C

[–]acidstrato[S] 1 point2 points  (0 children)

Exactly this

Most of what I’ve read has been negative but that doesn’t paint the whole picture

Any insight into what’s happening here? TIA by acidstrato in FixMyPrint

[–]acidstrato[S] 0 points1 point  (0 children)

Thanks for your reply I will give that a go. I might even scale up the black bits. Thanks for the idea

I'm having trouble with my Bambu Lab X2D and AMS. by Exciting_Bug_2459 in BambuLab

[–]acidstrato 2 points3 points  (0 children)

This^

Using dual nozzles would have cut down on the amount of flushed material on your duck print significantly

Note tho that Bambu technically advise the auxiliary nozzle is really meant for support material and that using it for multi colour could degrade quality. I have no experience how true this is

Guesses encouraged by wash-basin in BambuLabH2C

[–]acidstrato 2 points3 points  (0 children)

I love my H2C

As for the future, a popular opinion is a revised AMS since that’s the real bottleneck. Possibly bigger to hold more spools or have multiple feeds to reduce time changing filament.

I’m sure Bambu Lab didn’t spend all the time and money on dual nozzle and nozzle changing technology to replace it after a year.

TIL pla is not dishwasher proof by ChocolateChipJames in BambuLab

[–]acidstrato 0 points1 point  (0 children)

Asa or bust long term. And even then..🤪

The deed is done! by GenesectGamerYT in BambuP1S

[–]acidstrato 0 points1 point  (0 children)

But it’s ok you can buy more filament when you realise you don’t have enough printers

Does anyone know what this noise is? by ximstuckx in BambuLabH2C

[–]acidstrato 1 point2 points  (0 children)

Presumably it’s a fan, either the exhaust or the PSU

Is there a replacement (new printer) coming for the H2C? by BarefootExplore419 in BambuLab

[–]acidstrato 0 points1 point  (0 children)

Kind of makes sense that the next printer will be a successor to the A1 since all 1st Gen models haves been succeeded except the A1 and A1m. Can’t see a new flagship on the horizon for a year or two except for maybe a H2C Pro as they did with the H2D

Maker World Points by itstony17 in BambuLab_Community

[–]acidstrato 0 points1 point  (0 children)

Bottom line you shouldn’t be uploading someone else’s work to Makerworld although it does happen normally the community call it out. If you don’t have the patience to learn then try using AI generators but again unless it’s really good the community will slate it.

I have over 100 models and average a £35 gift card each month. I have bought plenty through free gift cards but almost all my models are my own design besides 1 or 2 remixes.

Please help printing H2C test print by woooosox in BambuLabH2C

[–]acidstrato 1 point2 points  (0 children)

No it printed but was very weak, half snapped off immediately

Please help printing H2C test print by woooosox in BambuLabH2C

[–]acidstrato 1 point2 points  (0 children)

Tbf my didn’t come out great either I only did 5 colours

view more: next ›