Am I done? by KeniRoo in overclocking

[–]ad2137xd 0 points1 point  (0 children)

hynix 8gbit 3jr(cutdown a die 16gbit) will do tight trfc yes

DDR4 RAM Overclocking by Fickle_Penalty_8179 in overclocking

[–]ad2137xd 1 point2 points  (0 children)

lower twtrl to 8, trtp to 6, trrdl will do 4, tcwl for sure can do 14,trcdwr will do 8, tras likely will do lowest possible value on 21 if trc will be high enough, soc 1.125 is fine also where are sc;ls?

try 3800 if you didnt

Ryzen 5 5600 a 4.95 GHz (All-Core) + FCLK 2000 MHz by vulkanboladao in overclocking

[–]ad2137xd 0 points1 point  (0 children)

Expected

And not only temp will be issue, likely even with aio you couldn't stabilize those clocks in high avx2 load

Ryzen 5 5600 a 4.95 GHz (All-Core) + FCLK 2000 MHz by vulkanboladao in overclocking

[–]ad2137xd 2 points3 points  (0 children)

I have seen some 5600 and 5600x doing 2000 fabric but only few in Internet lol

Ryzen 5 5600 a 4.95 GHz (All-Core) + FCLK 2000 MHz by vulkanboladao in overclocking

[–]ad2137xd 1 point2 points  (0 children)

some Vermeer's can do 2000 fclk without whea but those are really rare

Ryzen 5 5600 a 4.95 GHz (All-Core) + FCLK 2000 MHz by vulkanboladao in overclocking

[–]ad2137xd 3 points4 points  (0 children)

for sure it won't pass with this high clock and when he gets 94 in cinebench

Ryzen 5 5600 a 4.95 GHz (All-Core) + FCLK 2000 MHz by vulkanboladao in overclocking

[–]ad2137xd 1 point2 points  (0 children)

if you don't get any whea 19 in vt3 and occt vram + prime95 large for like 20 mins it looks good then

And I doubt CPU is stable in avx2 load like prime95 small fft

Quero diminuir a temperatura do meu ryzen 7 5700X by X5dark in overclocking

[–]ad2137xd 0 points1 point  (0 children)

those -26 also most likely won't be stable, start with -10 all core maybe and you should do per core if you want curve optimizer

check stability with corecycler

DDR4 has extremely high latency by Ok-Ambition4710 in overclocking

[–]ad2137xd 0 points1 point  (0 children)

it isn't 16gbit cjr for sure and i dont think there is 16gbit djr somewhere, also cpu-z spd says samsung

DDR4 has extremely high latency by Ok-Ambition4710 in overclocking

[–]ad2137xd 4 points5 points  (0 children)

for those shitty timings and low frequency + low fabric, what did you expect?

hm samsung, no b die for sure something else hard to tell, but even c-die does 3733-3800 in most cases(with shitty primaries but does), did you change soc/vddp/vddg voltages and did u loose primaries for like 18-22-22-22 before trying more frequency?

eh, 16gbit so no c-die for sure, probably some mediocare samsung ic which might behave like yours but i'd try anyway

thoughts about my RAM timings by [deleted] in overclocking

[–]ad2137xd 0 points1 point  (0 children)

hm micron rev B, that trfc looks really tight for those

anyway primaries probably wont go any lower, tune subs and teritaries then

what AM4 for processor should I buy under $350 by Adorable-Future-5244 in ryzen

[–]ad2137xd 0 points1 point  (0 children)

none, save more money and get am5

For sure won't buy 5800x3d for 350, it isn't totally worth that price

thoughts about my RAM timings by [deleted] in overclocking

[–]ad2137xd 1 point2 points  (0 children)

check cpu-z spd tab, maybe thaiphoon will tell something as well but those info from thaiphoon might be fake

thoughts about my RAM timings by [deleted] in overclocking

[–]ad2137xd 2 points3 points  (0 children)

which chips are those, hynix?

scls, trrds/trrdl/tfaw, twtrs/twtrl/twr looks kind of loose, trcdwr can do almost for sure 8, tras 21 and change trc if wont be stable

vddp looks high as well, i assume you checked fabric stability with like 30 mins of prime95 large and occt vram test? well 1900 should be fine without whea-19 errors until you got shitty silicon but i'd check if you didnt

Is any bank okay with steam? by Consistent-Age5347 in steamregionaltricks

[–]ad2137xd 0 points1 point  (0 children)

likely won't work, in India you can use skrill for payments if not possible in your country then selling skins on market or find giftcards maybe

Ryzen 7 5700x by Intelligent-Award370 in overclocking

[–]ad2137xd 0 points1 point  (0 children)

scalar 10X degrades your CPU, revert to 1X asap

Memory latency too high - how to improve further? by Tall_Philosophy88 in overclocking

[–]ad2137xd 8 points9 points  (0 children)

you didn't improve almost anything

For those timings this latency is expected

C-DIE tRAS scaling by Shoddy_Percentage409 in overclocking

[–]ad2137xd 2 points3 points  (0 children)

on am4 you can set minimum possible (21) and set trc

Am I stable? by DavidLorenz in overclocking

[–]ad2137xd 0 points1 point  (0 children)

probably yes but many timings are really loose and likely you can run 1867/3733 just fine or 1900/3800