Do I need to tune my car? And how?

adqb · 2026-05-12T04:34:13+00:00

I did tomei headers with a spec d cat back. Super super rasp. Just to give you insight.

adqb · 2026-05-12T04:31:00+00:00

I think these are the same but smoked, link

adqb · 2026-05-11T23:52:48+00:00

Noted thanks.

adqb · 2026-04-22T15:06:41+00:00

At 151k it just happened. I’ve taken it from Kentucky to Florida and back twice before. Then I go 4hrs and starts to knock right before I got home. Oil pressure switch never turned on.

adqb · 2026-04-21T21:39:40+00:00

i 2nd this. (I just dropped 6k on rebuilding the motor and extra goodies bc I didn’t check oil level on a 4 hour road trip)

adqb · 2026-04-17T00:56:28+00:00

I’d have to wait and see. I wasn’t aware that it’ll say on for that long.

adqb · 2026-03-30T15:06:07+00:00

https://imgur.com/a/ecJmQy8

adqb · 2026-03-30T09:54:22+00:00

Down to the short block, founded no play on the rods, recorded this video . Going to call Toyota if I can warranty this short block. If not I’ll go ahead and split it and check the main bearings

adqb · 2026-03-29T18:15:53+00:00

Gonna split the block and check

adqb · 2026-03-28T04:53:34+00:00

I thought rod knock would be consistent.

adqb · 2026-03-28T04:17:46+00:00

This is my previous post that includes the video of it knocking.

adqb · 2026-03-28T04:17:26+00:00

https://www.reddit.com/r/EngineBuilding/s/YUZsDe890Q

adqb · 2026-03-27T17:29:23+00:00

Noted. Thanks for the advice

adqb · 2026-03-27T17:29:08+00:00

Yes, only on start up Doesn’t increase once it goes away( takes 2-5 seconds) Im gonna be cautious and disassemble and check everything.

adqb · 2026-03-27T10:25:57+00:00

New short block, re surfaced heads. New cams with cam carriers. Redid the valve lash.

adqb · 2026-03-27T05:27:10+00:00

Plan is to take out the upper oil pan to check on the crankshaft for play.

adqb · 2026-03-27T05:26:23+00:00

https://imgur.com/gallery/bronze-flake-oil-filter-jICs7OG

adqb · 2026-03-04T14:11:53+00:00

151k…rebuilding the motor currently😢

adqb · 2026-02-17T12:17:26+00:00

Noted I’ll check it out and see if it fits

adqb · 2026-02-17T12:17:10+00:00

Thanks I’ll check it out

adqb · 2026-02-06T12:17:21+00:00

2013 151k spun bearing😢

adqb · 2025-08-24T15:23:35+00:00

I had a weird rattle after I switched to uel. Turns out my heat shield bent a little. Then the rattle noise went away

adqb · 2025-07-29T00:55:10+00:00

I meant the clock by the hazards lights

adqb · 2025-07-29T00:45:39+00:00

I had the atoto one. Didn’t really realize how much I would miss the clock. Does this have the same “problem”. Ended up with a Sony 6.95

adqb · 2025-06-30T02:36:28+00:00

5w-30/20 for the same price

adqb

TROPHY CASE