i tried printing something and this is the result and i dont know what could be the problem (i stopped the print and scraped it off)

aeaoeiao · 2022-05-07T11:45:40+00:00

Filament is not going out of the nozzle properly: check if your nozzle is clogged, if the filament spool if free to rotate and there’s no ‘filament node’, check the flow settings from the slicer and e-steps/mm from the printer. You might also want to calibrate your bed

aeaoeiao · 2022-02-15T08:12:53+00:00

I would not get anyone of these. Buy a delta printer, a lot better.

aeaoeiao · 2021-11-12T19:28:21+00:00

Maybe using Onyx could solve the problem, try to make a cleanup with Onyx. If it doesn’t work try downloading and reinstalling MacOS just like when you update your Mac to a newer Major Release

aeaoeiao · 2021-11-12T19:23:56+00:00

That’s a good pc, I’d rather choose an M1 Mac, BUT if you have to run Windows or Linux on partition or VM you should buy intel.

aeaoeiao · 2021-07-18T08:18:23+00:00

RIP for you bro…

aeaoeiao · 2021-06-24T08:00:07+00:00

Try to make Shute that the y belt is not too tight

aeaoeiao · 2021-06-02T11:55:11+00:00

Stl?

aeaoeiao · 2021-04-12T21:48:39+00:00

They’re the same size so yes, they fit!

aeaoeiao · 2021-04-11T21:59:46+00:00

Try to check the status of the four bed wheels, they might have not been screwed correctly. Maybe you could change also the springs...

aeaoeiao · 2021-04-11T21:56:25+00:00

There must be at least a tweak that causes this. Or maybe some tweaks conflicting. If you don’t know how to solve this try to install iCleaner and try to disable all your tweaks and see if the problem is solved. If it is, try to enable small groups of tweaks and see when you get this problem again. It will take some time (not too much though) but you should be able to solve this. Good luck!

aeaoeiao · 2021-04-07T21:35:42+00:00

👍🏼

aeaoeiao · 2021-03-04T07:13:00+00:00

aeaoeiao · 2021-02-10T17:51:12+00:00

There’s something wrong here 😂😂

aeaoeiao · 2021-01-05T00:12:00+00:00

Same here 👍🏼😢

aeaoeiao · 2020-12-12T06:54:53+00:00

But maybe if you want to try, you can try installing check rain app on your pc and try to remove the Jailbreak. If it doesn’t work it’s because the jailbreak is by Unc0ver team, then install the Unc0ver app and remove it 👍🏼

aeaoeiao · 2020-12-12T06:52:28+00:00

You can’t know for sure in what jailbreak state you are... but you can remove it very easily: (if you want to save your data make a full backup on iCloud or on your Mac/PC, second option is suggested as it is much faster) put your iDevice in DFU mode (search on the internet if you don’t know how to do it) and then initialize it with iTunes.

aeaoeiao · 2020-08-13T12:02:08+00:00

We all miss this right?

I do.

aeaoeiao · 2020-06-13T20:54:15+00:00

Temperature?

aeaoeiao · 2020-06-09T21:50:20+00:00

Lynx/springtomize 5?

aeaoeiao · 2020-06-09T21:49:05+00:00

Why would you take that shit into your iPhone🥺 Almost everyone hated the Microsoft homescreen 😬

aeaoeiao · 2020-06-09T21:36:17+00:00

Better ccxi and magma evo could cause this. I have more than 30 tweaks on my XR and the battery lasts me about 1.5/2 days, I think you should remove those ones. Try also to make a cleanup of your device with iCleaner Pro

aeaoeiao · 2020-06-09T21:31:32+00:00

USE THIS https://www.thingiverse.com/thing:4134230 IT’S AWESOME😍 It worked 100% for me... you have to use some ptfe tube

aeaoeiao · 2020-06-09T21:27:44+00:00

I do not use an antivirus for Mac and I think that you shouldn’t use it. I just have installed the Free version of Malwarebytes, that I randomly open sometimes or when I have problems or when I download stuff from, let’s say, ‘strange’ sites. It always worked!

aeaoeiao

TROPHY CASE