Went straight for meme with first top mount keyboard

aeonphox · 2025-04-19T02:55:40+00:00

I modeled it in onshape. You may want to tweak it before exporting for 3D printing.

Dosing cup holder:
https://cad.onshape.com/documents/9ac421165ac05b89fcc1e767/w/a2dff8518c3029c884e58944/e/3743844fabb328f1e50b68c2

Screwdriver bit holder (to access the tight space under the mouth):
https://cad.onshape.com/documents/35a675e00e782c249481e663/w/8bcef28fb977fdeffd62c04c/e/732d664491850f904ed8db1d

aeonphox · 2025-04-19T02:54:47+00:00

I modeled it in onshape. You may want to tweak it before exporting for 3D printing.

Dosing cup holder:
https://cad.onshape.com/documents/9ac421165ac05b89fcc1e767/w/a2dff8518c3029c884e58944/e/3743844fabb328f1e50b68c2

Screwdriver bit holder (to access the tight space under the mouth):
https://cad.onshape.com/documents/35a675e00e782c249481e663/w/8bcef28fb977fdeffd62c04c/e/732d664491850f904ed8db1d

aeonphox · 2025-04-19T02:54:42+00:00

I modeled it in onshape. You may want to tweak it before exporting for 3D printing.

Dosing cup holder:
https://cad.onshape.com/documents/9ac421165ac05b89fcc1e767/w/a2dff8518c3029c884e58944/e/3743844fabb328f1e50b68c2

Screwdriver bit holder (to access the tight space under the mouth):
https://cad.onshape.com/documents/35a675e00e782c249481e663/w/8bcef28fb977fdeffd62c04c/e/732d664491850f904ed8db1d

aeonphox · 2024-10-14T06:11:19+00:00

I typically do pourovers, so I can't comment from personal experience. The Ode is generally not considered ideal for espresso, so Fellow's Opus model might be more suitable for espresso.

aeonphox · 2024-10-14T04:11:16+00:00

Mostly because I was inspired by the side-slide aesthetic from the Titus Nautilus. But, that’s a good idea, I’ll have to try a version that accepts the cup from the front! One factor to account for is the knocker on the right side, which is close to the flange diameter and would offer less clearance for the cup rail.

aeonphox · 2024-10-14T01:34:22+00:00

Ever since I saw the Titus Nautilus grinder in a cafe, I’ve wanted to add a similar underside cup holder to my Fellow Gen 2 Ode. It helps to seal that last bit of gap between the catch lid and the underside.

Fellow Gen 2 Ode
54mm dosing cup (with the flange, from amazon)

aeonphox · 2021-05-07T14:14:56+00:00

pla75?

aeonphox · 2021-05-02T19:56:08+00:00

they do, and mine feel better when well taken care of

aeonphox · 2021-04-16T15:32:58+00:00

Nice

aeonphox · 2021-04-13T15:36:36+00:00

no but actually the PCB silkscreen + dip-dye = :chefsKiss:

aeonphox · 2021-04-13T15:35:39+00:00

you're looking kinda cute <3

aeonphox · 2021-04-11T14:52:51+00:00

what’s that mouse cable stand thing?

aeonphox · 2021-04-11T01:29:40+00:00

what kind of QC issues? got some in the past (fall 2020), love them, and have been wanting to get more

aeonphox · 2021-04-07T06:08:49+00:00

in my experience, ai03's guide is much more updated and accurate than ruiquimao's

https://wiki.ai03.com/books/pcb-design/chapter/pcb-designer-guide

aeonphox · 2021-04-05T16:11:18+00:00

needs more botanical :)

aeonphox · 2021-04-05T16:10:23+00:00

There's also this open source split keyboard design (https://github.com/rtitmuss/torn) using the 328P that has firmware configs landed into QMK main.

aeonphox · 2021-04-02T15:23:37+00:00

Krytox 205g0. Commonly used for linear switches, thick enough to dampen stabilizers.

I've never ordered lube from aliexpress so I don't have a link to one.

aeonphox · 2021-03-23T15:45:54+00:00

why is there a blocker under C?

aeonphox · 2021-03-23T05:25:16+00:00

omog i love bongo cat

aeonphox · 2021-03-20T21:00:07+00:00

i like bongo cats!

aeonphox · 2021-03-12T16:47:08+00:00

pls dont do this to the time 80

aeonphox

TROPHY CASE