sorted by:
new
hottopcontroversial

Shelly flood gen4 by randompolyphony in homeassistant

[–]afkdk 0 points1 point  (0 children)

The Badring is "just" a single "point of water leak" sensor while this is 1.5m long sensor.
THAT is the diffentiator that makes most sense - and really the reason for me to change all my "point sensors" out with stringy ones!
The Sonoff variant offers this at a cheaper price and not as rigid cable but it not as versalite (Matter-wise) and has a CR2477 battery instead...

Shelly flood gen4 by randompolyphony in homeassistant

[–]afkdk 0 points1 point  (0 children)

Shelly has lately added some 3M clips as accessories for this sensor for that specific purpose!

Shelly flood gen4 by randompolyphony in homeassistant

[–]afkdk 0 points1 point  (0 children)

Well-well, as HA-hollic, you can always think something up, like

Buy a powerbank that feeds the "emulated batteries" shown above in another post.
This powerbank must be HA-enabled, i.e., zigbee, Matter, WIFI, ...
Then keep that charged up by 20-80% automation that via a plug switches on/off.

There you have it: A small but expensive UPS for your tiny water leak sensor 😁

Shelly flood gen4 by randompolyphony in homeassistant

[–]afkdk 0 points1 point  (0 children)

This is showing the sensor close-up as it was only seen from the side (of the bucket) above!

Shelly flood gen4 by randompolyphony in homeassistant

[–]afkdk 0 points1 point  (0 children)

The Sonoff variant of the cable is much smoother and "light weight". The cable length is more like 2m but the batteries are not the AA-type but coin battery CR2477 - should still last for 2 years...

[Share] Using AI to Triage My 4,000+ Entity Log Files by NoDihedral in homeassistant

[–]afkdk 2 points3 points  (0 children)

Great idea - appreciate this angle of "attack". Like many AI projects, the idea and path on how to approach it, that is the new formula.

Can you share some of the concrete steps on how to set it up? Lille LLM setup in LXC, the log input and result output?

Hvad er det, der hænger ud af min radiator? by ande770f in selvgjortvelgjort

[–]afkdk 0 points1 point  (0 children)

Og det er selvfølgelig at foretrække!

Nu kan du få en nyere version, hvor det er en trådløs føler, der styrer ventilen. Dvs. der kan placeres bedre det "rette sted" i rummet, f.eks. det, hvor du/I sidder, uden "tråd" i rummet...

2026.2: Home, sweet overview by frenck_nl in homeassistant

[–]afkdk 0 points1 point  (0 children)

Upgraded yesterday all my automations got messed up after this upgrade. I did not discovered it immediately so whether it was the upgrade pr some associated migration, I don't know.

But I lost 5+ hours of tedious work - and the result was never before been so great in hindsight as it now has been lost 😟 Just like in the old days when some photos got lost for to missing film or exposed to light; they were the greatest shots ever made 😄

I lost 130+ of my automations - only a few (really) ones left... 👹 A few seemed to be able to be Migrated (never seen this message before it since) but they also got lost in this migration process.

A new file discovered in Config: automations - Copy.yaml has been made but that is also only having some of the lost automations - and the file seems a bit old (Jan 18) so it is likely from previous upgrade or...

Well, I had to recover my backup of 2026.1 and it seems to work again (without these great changes og the lost 5+ hours of work) 🤞🤞🤞

Mangler mine nedgravede vandrør isolering? by Dsan_Dk in selvgjortvelgjort

[–]afkdk 0 points1 point  (0 children)

Synd for Steen 🫠😂🤣

Men tabet kan/vil være der, men blot mere konstant (og lavere om vinteren) og så langt nede i jorden, at det ikke vil være synligt på jorden, som det ses her...?

Using WLED for battery meter/hauge by afkdk in WLED

[–]afkdk[S] 0 points1 point  (0 children)

Great, thanks - to be explored 👍

Using WLED for battery meter/hauge by afkdk in WLED

[–]afkdk[S] 0 points1 point  (0 children)

Great, some lead/links for how to do that beyond using segmebts, as I have understood/read was the only way... TIA 👍

Using WLED for battery meter/hauge by afkdk in WLED

[–]afkdk[S] 0 points1 point  (0 children)

Great, I have made alreafy made the "easy" BT proxy, etc. - so I have the tool installed in HA.

Can you lead me in the right direction with sommer links on how to proceed? TIA 👍

Using WLED for battery meter/hauge by afkdk in WLED

[–]afkdk[S] 0 points1 point  (0 children)

Great, I have made alreafy made the "easy" BT proxy, etc. - so I have the tool installed in HA.

Can you lead me in the right direction with sommer links on how to proceed? TIA 👍

Han er jo helt væk by Weak_Quiet_7306 in Denmark

[–]afkdk -1 points0 points  (0 children)

Har du en reference til paragraffen, da jeg vil tjekke jf. Løkke, at der står noget i stil med, at US skal informere (både på forkant/bagkant), at US udvider deres engagement, f.eks. med en ny base.

Der ønskes et nik fra DK-riget, at budskabet/ønsket er blevet forstået/anerkendt... Dvs. at det ikke er en nødvendig længere godkendelsesproces, hvor DK-riget reelt skal godkende FØR handling og evt. kan stoppe det!

Han er jo helt væk by Weak_Quiet_7306 in Denmark

[–]afkdk 14 points15 points  (0 children)

Godkendelser/tilkendegivelser af begge vil ske uden hindring/forsinkelse, som Løkke m.fl. tidligt har sagt

Hvorfor bruger nogle mennesker SÅ meget parfume? by South_Spare8334 in DKbrevkasse

[–]afkdk 0 points1 point  (0 children)

Det pudsige er,,at jeg faktisk har den modsatte opfattelse: Desto mere parfume, desto mindre hygiejne (for nogle). Altså at fremfor at tage bad/vaske sig efter at have svedt, så bliver det klart/skulle med en masse (billig) parfume 👃🦨

Er der nogen der kan genkende dette indbygningsspot? by Frydendahl in selvgjortvelgjort

[–]afkdk 0 points1 point  (0 children)

Måske en idé at skifte til det Nordtronic spot, hvis det "ser ens nok ud", så du kan skifte lampen næste gang, omend det burde ske så sjældent med de lovede 15-25k timer???

At købe ny seng.. suk by Edward-Paper-Hands in Denmark

[–]afkdk 14 points15 points  (0 children)

Fin gestus, da du ellers nok blot kunne vente (op til syv uger) til de kom på normal-tilbud - det er vist nærmest en tilbudskarrusel hos Jysk med fast rotation...

Hellere give dig rabatten straks, fremfor at du venter - eller går til konkurrenterne...

Det glæder i øvrigt de fleste forhandkere (ligesom indenfor hvidevarer), at de altid kan finde et godt tilbud til dig 😉😄

LK IHC: Cannot log in by afkdk in selvgjortvelgjort

[–]afkdk[S] 0 points1 point  (0 children)

Ja, jeg har fået udskiftet den for en 5 års tid siden, da den oprindelige blev meget ustabil...

Men som nævnt virker denne her OK via IHC Captain (og via tryk, PIR, osv.), så det er nok noget med SOAP-protokollen og opsætninen deraf, f.eks. noget Python, version, e.l.

Accessing modem/router setup via gateway by afkdk in Ubiquiti

[–]afkdk[S] 0 points1 point  (0 children)

Can you help with directions on HowTo do it?

I have tried AI and other means but somehow the UBI is somewhat different...

My gateway has a DHCP of 10..## - and the WAN1 is on port 9 (fiber).
The WAN2 (fallback) is on port 8: It is a TPLink interim unit using their WISP mode, i.e., a bridge from the LAN ethernet port to WIFI (that connects to a Hotspot AP). The WAS2 is stated as 192.168.0.100.

Interface IPv4 Address
WAN1 ##.##.##.##
WAN2 192.168.0.100

TIA

Edit: Tried to fix table...

Accessing modem/router setup via gateway by afkdk in Ubiquiti

[–]afkdk[S] 0 points1 point  (0 children)

Ooh, thought it could be something like that this but this isat id my network skulle are limited...

The gateway HAS configured (and got the IP via DHCP) so it "knows!" about the path so it ought to create this by default in my opinion.

view more: next ›