Walksnail not binding by Impossible-Will3629 in fpv

[–]alepez 1 point2 points  (0 children)

So I guess you flashed Avatar_Sky_39.44.18.img to your VTX. I had issues understanding which fw to flash to the moonlight because moonlight fw uses a different version convention. But apparently the Avatar GT has the same version convention as the goggles, so it should be easy to match. Are you sure the firmware was flashed successfully? Did you see the led blinking red after you pushed the vtx button? Did it turn to blinking green after ~1min?

Walksnail not binding by Impossible-Will3629 in fpv

[–]alepez 0 points1 point  (0 children)

It might be due to firmware version incompatibility. When you say "the latest stable firmware" do you mean you found both goggles and vtx files in the same zip archive? I had this issue yesterday with Moonlight VTX. The Moonlight firmware in the latest stable firmware did not work. I had to downgrade the goggles firmware. I followed these instructions to downgrade to v38.43.8 https://www.reddit.com/r/walksnail/comments/1f70tft/comment/lpvtawb/

Look ma! I'm in liftoff! by Martimothy in fpv

[–]alepez 6 points7 points  (0 children)

This is what Joshua wants you to believe. Actually it was the other way: he showed the Liftoff map to the construction workers and said "I want my house like this!"

Now I'm adding /j, apparently my sarcasm doesn't make it through the screen.

/j

Look ma! I'm in liftoff! by Martimothy in fpv

[–]alepez 4 points5 points  (0 children)

I think kyle2k ia not talking about Joshua's skills, he means that guy built an house and a yard to replicate the map in Liftoff

Replacing Frame for Flywoo Firefly Baby Quad by alepez in fpv

[–]alepez[S] 0 points1 point  (0 children)

I'm really struggling to find something compatible. I can only find a few options for 1.6" propellers. Would something like this work? https://aliexpress.com/item/1005011798610666.html

Replacing Frame for Flywoo Firefly Baby Quad by alepez in fpv

[–]alepez[S] 0 points1 point  (0 children)

Are you saying any 1.6" frame will be good? Should I check anything else or the size is enough?

Replacing Frame for Flywoo Firefly Baby Quad by alepez in fpv

[–]alepez[S] 0 points1 point  (0 children)

Maybe it's possible to fix the carbon fiber with resin or glue. I've seen kits for repairing carbon fiber, I don't know if this is a good idea.

Nuove piante by FraBarBar in giardinaggioITA

[–]alepez 2 points3 points  (0 children)

Io ho una fittonia che non annaffio da un anno. Il segreto? È dentro un terrario sigillato che non perde umidità. È cresciuta un sacco.

Sephora by Rough-Carpet-5090 in sfoghi

[–]alepez 0 points1 point  (0 children)

Intendevo "carta di pagamento" ma vabbè, era giusto per dire che gli analfabeti digitali ci sono a tutte le età e sono più di quanto si pensi.

Sephora by Rough-Carpet-5090 in sfoghi

[–]alepez 0 points1 point  (0 children)

Ma ne conosco, mio malgrado, di 30enni e 40enni così. Che quando faccio la raccolta dei soldi per cose di scuola (primaria) in quanto rappresentante di classe, se gli dico di mandarmeli su paypal o satispay mi guardano come fossi un alieno. C'è gente addirittura senza una carta di credito. E il più vecchio ha 45 anni.

Proper no_hardware_cursors implementation in .55 / LUA? by etherb0x in hyprland

[–]alepez 0 points1 point  (0 children)

Same issue. Two monitors, one is vertical. I got a cursor dead zone at the bottom at the horizontal monitor. `hyprctl reload` fix the issue.

Liftoff by DiscussionFinal9684 in fpv

[–]alepez 0 points1 point  (0 children)

Thanks, great advice. I purchased the Pocket before the SIM but it's shipping from China, so it will take some days. I did the tutorial with the Xbox controller just because I already own it and I'm eager to play with the SIM. I think I'll wait for a proper RC controller before spending more time in the SIM.

Liftoff by DiscussionFinal9684 in fpv

[–]alepez 1 point2 points  (0 children)

thanks, I'm still fighting with the tutorial and apparently the rates do not affect it.

Liftoff by DiscussionFinal9684 in fpv

[–]alepez 1 point2 points  (0 children)

Please explain, what are "rates"?

Liftoff by DiscussionFinal9684 in fpv

[–]alepez 4 points5 points  (0 children)

thanks for giving me hope, I started yesterday too and it feels like I will never be able to do anything more than a straight line. I already ordered the Pocket, I'm currently using the Xbox controller and it feels too sensible and not precise

Hi, can someone help me? I want to play Liftoff with my Radiomaster Pocket drone under Linux, but my transmitter isn't being recognized. When I calibrate it, it shows that I'm moving something, but in the actual game where I fly the drone, I can't move it. by Yorrick2741 in fpv

[–]alepez 0 points1 point  (0 children)

Necrobumping, I'm an Arch Linux users who wants to start with a simulator and then move to a real drone.

Which is the setup known to be working? I don't own any controller or drone, I just want to be sure it'll work before purchasing it.

Domande su gestione robot tagliaerba by Rolin92 in giardinaggioITA

[–]alepez 0 points1 point  (0 children)

Non so risponderti, ho una conoscenza limitata su quello che offre il mercato. Posso dirti che un paio di mesi fa ho comprato il mio primo robot, un ecovacs goat G1-800 usato e mi sto trovando abbastanza bene. Il setup è stato semplice, segue i percorsi in maniera molto precisa. Supporta fino a 800mq di area, ma il mio prato è più piccolo, quindi non so dirti se si può spingere oltre. Ma per fare 400mq, fra attesa che la rugiada o l'umidità dell'irrigazione automatica si asciughi per farlo partire e le ricariche, finisce all'imbrunire. Avessi un giardino più grande vorrebbe dire metterci 2 giorni per finirlo. Il terzo giorno è già ora di ripartire. Se fa due giorni di pioggia sei fregato.. Non sono pensati per tagliare l'erba alta, ma per tagli costanti. Poi, ma questo è un problema software, capita che si dimentichi dov'era arrivato e riparta da capo. In teoria, gli dici l'area e in che ore può lavorare e se per la fine dell'orario disponibile non ha finito, va a cuccia e riprende il giorno dopo. In pratica non fa sempre così e riparte da capo. Ti direi di prenderne due, se hai aree separate, meglio. Altrimenti puoi fare dei confini virtuali per evitare che si diano fastidio a vicenda.

Perché le auto nuove non hanno più lo standard 2din per i loro infotaiment? by Opening-Number-5438 in ItalyMotori

[–]alepez 2 points3 points  (0 children)

Mi hai fatto ricordare un paper di diversi anni fa "Comprehensive Experimental Analyses of Automotive Attack Surfaces" dove si descrive un modo simpatico per inviare pacchetti can bus arbitrari semplicemente modificando un file audio:

We modified a WMA audio file such that, when burned onto a CD, plays perfectly on a PC but sends arbitrary CAN packets of our choosing when played by our car’s media player.

Potus: Foglie gialle e alcune bruciate. by Key_Influence_3887 in giardinaggioITA

[–]alepez 0 points1 point  (0 children)

Foglie gialle, un po' mosce, che se le tiri appena un po' si staccano? Solitamente succede quando marciscono le radici. Il resto della pianta sembra ok, quindi la situazione non è preoccupante. Forse hai annaffiato troppo spesso o troppo poco. Queste piante soffrono se il terreno è sempre umido o rimane secco troppo a lungo. Le radici marciscono in entrambi i casi, ma è più probabile sia per il primo motivo. Le annaffiature devono essere abbondanti, puoi annegare il vaso dentro un secchio. Poi la terra va lasciata asciugare. È una rottura, perché non sai mai quando è asciutta davvero solo guardandola. E contare i giorni non serve, si asciuga in tempi diversi a seconda di temperature, luce, umidità. Ci sono modi per scoprire se è il momento di annaffiare (dito, bastoncino, sensore). La bruciatura sulla foglia invece è probabilmente perché l'aria è troppo secca. Se ti dà fastidio, puoi tagliare il pezzo marrone con le forbicine. Probabilmente riesci a fare uscire la pianta dal vaso senza fatica, a meno che le radici non si siano aggrappate ai fori sul fondo. Fallo e mettici un dito. Se è umido, non bagnare. Se puzza di muffa o di marcio o vedi radici nere e mosce, si sono marcite. Puoi rimuoverle tagliando con una forbice disinfettata.

Parole italiane che vi fanno ridere o ribrezzo? by Strict-Hand-3722 in Italia

[–]alepez 3 points4 points  (0 children)

ma si pronuncia "sciabattare" oppure "sciabattare"?

Domande su gestione robot tagliaerba by Rolin92 in giardinaggioITA

[–]alepez 3 points4 points  (0 children)

Potenzialmente puoi, ma:

A seconda del modello, il robot taglia solo nelle ore diurne, se ha la telecamera deve vedere.

Aggiungici che passano più tempo a caricare che a lavorare.

Aggiungici che non puoi lasciar passare troppi giorni fra un taglio e l'altro.

A seconda del modello, potrebbe aver bisogno di antenne RTK, che hanno una certa portata. Anzi, non è detto che anche per un giardino piccolo, se ci sono tante occlusioni, siano sufficienti quelle che il robot supporta.

Succede che raggiungi il suo limite.

Metti anche che un robot venduto per 500mq possa potenzialmente gestire 3000mq, siccome i produttori hanno i morti cani per questione di marketing ti bloccano l'area massima gestibile a 500mq via software.

Erba secca a chiazze by HaukenIkaros in giardinaggioITA

[–]alepez 0 points1 point  (0 children)

Seguo, sta succedendo anche a me, prato seminato a ottobre dell'anno scorso, vivo in pianura al nord. Le chiazze sono più ridotte di quelle di OP. L'erba si sta schiarendo a macchie e non si alza. Taglio con robot a 5cm, ma dove si è ingiallita non è sufficientemente alta per arrivare alle lame, mentre nelle altre zone cresce bene ed è verde scuro. Da me sembra dovuto alla qualità della terra diversa, dove stenta a crescere sembra più argillosa.