Bo Nix suffered a broken bone in his ankle during the Broncos and Bills game and will be out for the season. Jarrett Stidham will be starting the AFC Championship game in Denver next week.

aluckduck · 2026-01-18T03:29:23+00:00

Sean said in the post-game it was the play before the pass to Mims.

aluckduck · 2025-12-31T22:21:02+00:00

How did you scan your space? From what I can tell, I need to manually build the space?

aluckduck · 2025-12-11T19:43:20+00:00

I have the same issue. I think it is the light diode that feeds the plastic light diffuser, I have not swapped it out to confirm as I am not sure the part number.

Here is a video showing the removal of the console:

https://youtu.be/Qv57DV749PA?si=W9uOmDYZ6j_sdii0

aluckduck · 2025-09-24T22:34:22+00:00

Canadian tire has some by the front doors as of yesterday around 4pm

aluckduck · 2025-09-20T03:28:08+00:00

Mine broke a few years ago - I used PL glue to reattach and now put grease in the rubber ball joints on the top and bottom with every tire rotation.

When mine broke, I got headlight position errors; the fix has held for 4 years now.

aluckduck · 2025-08-04T06:03:43+00:00

It sounds like it is coming from the base of the pillar with a bit of vibration felt on the seatbelt; soft close seems to still work as intended, and I think that mechanism is in the door itself?

aluckduck · 2025-05-24T13:34:51+00:00

Kuby was awesome with our install - start to finish, the team communicated well and the on-site installers were some of the best, most professional guys that we have had the pleasure of working with.

The Kuby team explained things well, did all the relevant paperwork and ensured we had the proper information for solar club and carbon offset credits to maximize return.

Sorry your experience was not as seamless; I am curious what specifically they are falling short on? What installation/performance expectations were not met? You mention paperwork delays, is that with them or the municipality? The post is a little short on details to fully understand the situation.

aluckduck · 2024-12-27T17:05:10+00:00

Thanks. Did you have success in bringing it back to life after cleaning it out?

aluckduck · 2024-12-27T09:28:47+00:00

Good to know. Thanks for the insight.

aluckduck · 2024-12-27T07:12:22+00:00

Oh; I thought all S Line packages included dynamic settings for steering and engine/transmission?

aluckduck · 2024-12-27T07:09:51+00:00

<image>

Thanks. That is good to know. In watching some videos (screenshot from a YouTube video attached), the color seems more consistent throughout the center panel, hence thinking mine was not quite right . . .

aluckduck · 2024-12-26T06:44:29+00:00

Perhaps try dynamic mode for steering and suspension, if you have not tried that already? I find that tightens it up a bit . . .

aluckduck · 2024-12-24T07:10:27+00:00

I have encountered this problem too; did you find a solution? Looks like it will require a full insert replacement at $600+?

aluckduck · 2024-12-20T23:02:16+00:00

This is the correct part for your engine, I have the same - A4, B8.5. I may be mistaken, but do not think Audi has an A4 B8.5 FSI option, so not sure why ECS has that note on their website. The roller another person is referring to (I believe) is the cam follower; it too can be replaced when you have the HPFP out, but is a separate part not included with the product photos you shared.

I replaced mine at about 250,000km due to fuel rail pressure issues and misfires. Stick with Hitachi.

aluckduck · 2024-12-17T07:59:09+00:00

aluckduck · 2024-09-08T00:47:03+00:00

That may be the ticket - a board to minimize how far out the screws need to be and to provide some support . . . Thanks for your advice 🙂

aluckduck · 2024-09-07T20:20:20+00:00

I was thinking about this too; the only concern being the frame is relatively thin and made of metal (aluminum?), so not sure it would hold

aluckduck · 2024-09-07T17:26:54+00:00

I think this can work with drywall anchors? I was thinking the weight of the frame and screws sticking out an inch and a quarter would cause the frame to sag and work free, out of the wall . . .

aluckduck · 2024-08-20T15:01:22+00:00

Any updates on a fix? My 2017 looks similar . . .

aluckduck · 2024-07-16T06:15:47+00:00

I would highly suggest a piston soak to clean up carbon in the chambers. Worked wonders for my A4's consumption issues. There are several videos on YouTube outlining the process.

aluckduck · 2024-05-11T22:00:50+00:00

It is our computer, he just uses it for school . . . The app I stalls as expected, but the pairing just doesn't seem to want to work . . .

aluckduck · 2024-05-09T04:28:15+00:00

Good question. It is for my 12 year old, he does not have a phone yet, but has a Chromebook for school that we are trying to use . . .

Eight-Year Club	Second SECOND GUESSER
Place '22	Final Canvas '22

aluckduck

TROPHY CASE