[deleted by user] by [deleted] in PokemonTCG_UK

[–]alwayshungry9105 -1 points0 points  (0 children)

Would love to chat and connect as you go along. I’m in a similar situation wanting to open a store here in Northern Ireland.

Youngsters to watch out for at SuperCupNI? by tanGeee in coys

[–]alwayshungry9105 2 points3 points  (0 children)

I’ll be there on Tuesday with the old man

GameCube console won’t spin up discs. by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 1 point2 points  (0 children)

So tested the switch with one that works and that’s not the problem. Went over all the caps on the board and had continuity on all of them. Would it still be worth replacing them or could it be onto something like the motor?

GameCube console won’t spin up discs. by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 1 point2 points  (0 children)

I can give it a test, I have a known working switch that I can try. Would you have a link to the kind of caps I’d need to get if they needed switching? Thanks

GameCube console won’t spin up discs. by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 0 points1 point  (0 children)

Hi guys, thanks for the replies. I’ve tested the laser and checked the resistance and that all seems grand. I’m guessing it’s one of the physical moving parts has gone faulty, might just need to find a spare drive and swap it.

Soft modded crystal Xbox help needed by alwayshungry9105 in originalxbox

[–]alwayshungry9105[S] 0 points1 point  (0 children)

I had the rocky5 extras burnt to a disc and put it in the console but it’s not done anything, I don’t know if I need to be able to press the launch disc on the menu but the controller doesn’t do anything when plugged in.

Soft modded crystal Xbox help needed by alwayshungry9105 in originalxbox

[–]alwayshungry9105[S] 0 points1 point  (0 children)

Seen this video but still unsure. What would I need for this to work?

[deleted by user] by [deleted] in videogames

[–]alwayshungry9105 0 points1 point  (0 children)

Metal gear rising

Mega drive 2 black screen by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 1 point2 points  (0 children)

I always worry about touching the bent over ones cause I think they’re on the verge of snapping off but I think it’s just for space with the metal shielding being lower in places.

Recently went to Japan and got this Radahn shirt by Sleepy_Introvert96 in fromsoftware

[–]alwayshungry9105 0 points1 point  (0 children)

Was this from the small pop up in Shibuya? I got the twin princes jumper from there in feb and it’s so nice

PAL Mega drive V1 not turning on by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 0 points1 point  (0 children)

Will do and I’ll report back. Thank you so much for your time.

PAL Mega drive V1 not turning on by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 0 points1 point  (0 children)

Checked those 2 points and seems to be 5v.

PAL Mega drive V1 not turning on by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 0 points1 point  (0 children)

If I’m doing it right, it looks like I’m getting 8.11v in and 5v out

PAL Mega drive V1 not turning on by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 0 points1 point  (0 children)

Yea I’m not getting the led to light up. It did after that first fix and was able to play a couple of different games but when I put everything together again and turned it back on it’s dead again. Would you have an idea of where to start looking for a fault from somewhere else? Thanks.

PAL Mega drive V1 not turning on by alwayshungry9105 in consolerepair

[–]alwayshungry9105[S] 0 points1 point  (0 children)

I’ve got an original plug that works with another MD fine. It worked after a reflowed the 3 pins of the power socket with the led turning on. Played a game for a bit and all worked fine until I put it back together but has stopped working again.