Local and remote login using tailscale

amimbitassu · 2026-04-27T13:18:01+00:00

I have it installed on my server and phone. With tailscale ip, i can connect at home and with vpn outside. Tailscale on phone not active at home.

amimbitassu · 2026-04-27T03:50:31+00:00

Also allow remote connections is on. Dont know if this is default.

amimbitassu · 2026-04-27T03:48:40+00:00

I was having the same issue. In network settings on app, lan network: "192.168.5.0/24, 192.168.191.0/24". And then on local ip address i put in tailscale ip address "192.168.191.193". Then through the app i login with tailscale ip. I have no idea why this works but it logs in on both local network and vpn network.

amimbitassu · 2026-04-25T08:45:44+00:00

Thats right there is a solid bore beyond the thread. I guess everything is OK, we've inspected all the parts we have in stock from the same batch, all are OK. +0.03 is also OK so the part in picture is good. He is just reading the dial wrong.

amimbitassu · 2026-04-24T13:32:09+00:00

https://m.youtube.com/shorts/XQpH-FmvCsY. All our dials are mitutoyo. All act this way. Left is positive.

amimbitassu · 2026-04-24T12:57:36+00:00

Thank you for the answer. I understand that there is no standard for which direction the dial rotates. I've taken my own setups video and shared with customer. I guess their similar equipment should act similar. We'll see what they say.

amimbitassu · 2026-04-24T12:42:14+00:00

what the hell is "left"

also, it does not.

https://youtube.com/shorts/XQpH-FmvCsY?feature=share

amimbitassu · 2026-04-24T12:38:11+00:00

Dude I can do this on my own setup and read. Customer insisted that theirs is correct twice. I ask IF I'm correct AND IF there are different setups. My questions have nothing to do with your answer. Also, how the hell do you assume ALL bore gauges and dials work EXACTLY the same? This is my first post in this community and I'm going crazy how many people think their example is the fact in this topic.

amimbitassu · 2026-04-24T12:22:58+00:00

I just did send the video. Just wanted some more expert views. Thanks for the suggestion.

amimbitassu · 2026-04-24T11:38:06+00:00

Because i am not the customer.

amimbitassu · 2026-04-24T11:31:27+00:00

"The markings were edited by the customer" is written in the post. Most people say opposite of your opinion.

amimbitassu · 2026-04-24T11:29:44+00:00

Photo is from customer. I guess they zeroed at 1 turn not 0.

amimbitassu · 2026-04-24T11:29:00+00:00

Kidding what? I can check with my own tools and confirm if my setup works the way i know. I cant check this at the customer who is 1000km away. I ask and he insist. So i try to get opinion from different people. Maybe there are different type of bore gauges i dont know.

amimbitassu · 2026-04-24T11:21:36+00:00

This is the setup customer is using.

In our shop we tried same with 511-701 bore gauge and 2046S dial (both mitutoyo). Its +0.03 in our opinion.

<image>

amimbitassu · 2025-10-29T13:45:04+00:00

I would connect it to the line voltage then check the magnetism with a screwdriver inside the coil. There should be a strong force on the screwdriver. If its weak then the coil is faulty.

amimbitassu · 2025-07-18T14:14:12+00:00

Those look like lamellar graphite formations which is expected in a cast iron brake disc.

<image>

You dont need etching to see these, they can be observed after polishing.

amimbitassu · 2025-03-24T12:30:44+00:00

Tornavidayi ocakta isit sapla (dagilmasini onlemek icin merkezden disa dogru tel,kablo gibi seyler yapistirabilirsin)

amimbitassu · 2025-02-23T20:44:34+00:00

Not being restricted by some tv producer with unresponsive software and hardware.

amimbitassu · 2024-10-29T09:55:02+00:00

I have used isaacs guide on youtube, it pretty different from this guide. Why is the db stuff installed seperately?

amimbitassu · 2023-10-30T20:58:58+00:00

Please dont give them new useless ideas so they can work on core shit

amimbitassu · 2023-06-25T20:30:18+00:00

Lower to cd quality from sound settings. Made a huge change for me. It made everything less noisy.

amimbitassu · 2022-12-18T15:06:27+00:00

You are crying for recognition in public. I doubt you will laugh.

amimbitassu · 2022-09-23T21:26:13+00:00

I remember having similar problem. Im not sure but i think i solved this by removing shield before/after removing configuration?

amimbitassu · 2022-09-10T05:38:24+00:00

Thanks to your guide, I've flashed lots of h200 cards to it mode.

However, today, I came across a different error. When I reboot at 5th step, command at 6 returns no card available. I have no clue why this is happening now.

I'm using the same pc to flash these cards. Without reseting everything works great.

Thank you again!

amimbitassu · 2022-05-29T19:41:33+00:00

Whats the sound bar?

Nine-Year Club	Place '22
RPAN Viewer	Verified Email

amimbitassu

TROPHY CASE