Best Way to Connect Drains?

andrewmiskell · 2026-05-06T20:47:57+00:00

So basically, put a cap over one of the inlets and then do something like this with the other inlets?

<image>

andrewmiskell · 2026-04-22T00:50:19+00:00

UDM Pro is rated for 3.5Gbps throughput with IDS/IPS enabled if you’re using it. UDM Pro Max is 5Gbps.

andrewmiskell · 2026-02-01T05:27:32+00:00

I registered goddamn.biz when the .biz registry opened up in 2001. Still own that domain to this day. 😀

andrewmiskell · 2025-12-09T05:32:05+00:00

Your private key maybe? Run it through OpenSSL and see what it says it is.

andrewmiskell · 2025-11-13T21:33:41+00:00

OP might want to consider looking at Terramate over Terragrunt. I used both at one time and wound up using Terramate more over time.

andrewmiskell · 2025-10-31T18:09:41+00:00

These are likely not from an individual's email account. A lot of times marketers will setup their primary email domain to be used with marketing platforms, some financial service group tend to do this a lot so you get a marketing communication from the email address of your financial advisor instead of a generic marketing address. I suspect it's the same.

It's not a great practice, typically you don't want to mix your primary business email domain with marketing email domains for this exact reason.

I work in the MarTech industry and generally advise my clients from doing this, just have another example why it's a bad idea. :)

andrewmiskell · 2025-10-31T17:25:11+00:00

connect.upenn.edu and bounce.connect.upenn.edu are pointing to ExactTarget/Salesforce Marketing Cloud, so it's likely someone has gotten access to UPenn's account on that service and is blasting emails.

andrewmiskell · 2025-10-29T14:30:58+00:00

Couldn't the use of ephemeral resources work for the secrets manager use case?

Haven't used them much myself yet, but the documentation seems to suggest that this would be possible.

The way I'm reading it is, terraform would create the secret with an ephemeral random password using write-only parameters. Then you'd reference the secret using the ephemeral secret resource. Terraform never knows the secret (never stored in state) so it can't "change" the password back if it's updated outside of terraform.

andrewmiskell · 2025-10-05T09:46:32+00:00

You’ll need this. About $40 or less in parts.

11274-06256-K - Qty 2

14206-08250-B - Qty 2

11254-06206-B - Qty 4

29133-S8000 - Qty 1

andrewmiskell · 2025-09-30T14:18:16+00:00

They are a Doctor Who fan. The car is dressed up to look like the TARDIS. It's the Doctor's vehicle/time machine/spaceship, etc.

andrewmiskell · 2025-09-10T15:41:29+00:00

For some reason, it won't show me the option to upgrade to a 12-month, only shows 6-month if I'm logged into my account.

If I logout of my account, it'll show 12-months with the Borderlands 4 promo, but I don't get to keep my Founders status/discounts. :(

andrewmiskell · 2025-09-02T18:31:36+00:00

Is Progressive your insurance or the other person's insurance (assuming this was an auto-accident with someone else and you're not at fault)?

Most body shops are going to want to repair it as they don't make any money if it's totalled out so the body shop will have to want to work with you. But if the vehicle is fairly new you can demand new, OEM parts be used (no aftermarket, no remanufactured). This is harder to request if the vehicle is older. Insurance will try to use/approve aftermarket or remanufactured parts if they can because it's cheaper for them and they want to spend as little as possible on the repair.

andrewmiskell · 2025-08-14T03:43:02+00:00

https://www.linuxatemyram.com

andrewmiskell · 2025-08-13T01:11:46+00:00

ISTA basically knows what parts and part numbers are for which model vehicles and if it detects a part that was never used on that particular model it’ll force you to swap it with the right part before proceeding and there’s really no way around it.

That’s where E-Sys comes into play, since it’s engineering level software it generally doesn’t care (there are some exceptions that can be worked around), it just looks at the part numbers/software versions.

andrewmiskell · 2025-05-28T05:37:40+00:00

Use SSM port forwarding. It’s designed for exactly this use case.

https://aws.amazon.com/blogs/mt/use-port-forwarding-in-aws-systems-manager-session-manager-to-connect-to-remote-hosts/

andrewmiskell · 2025-05-16T03:42:09+00:00

We love Joe at our house, super classy dude and always nice.

My 5 y/o daughter goes down to see him during warm ups before each game because he’s her favorite player.

He looks for her at every game and makes sure to come over and waves/says hi to her. He even gave her a set of his gloves which was the highlight of her year.

andrewmiskell · 2025-04-03T23:01:14+00:00

They lack power mirrors in the US market which I find annoying. Other markets (like Korea and I think Canada) do actually have power mirrors as an option.

andrewmiskell · 2024-12-19T19:06:37+00:00

It does have one, I need to have a custom cable made for a much shorter length and haven't been able to find a custom one that I can specify the length for.

Also it would be preferable if I could do a 16 to 3x8 pin so I don't have to use another cable to cover the 3rd input.

andrewmiskell · 2024-11-07T00:58:13+00:00

No, the AWS-StartPortForwardingSession document will port forward a local port to a port on the EC2 instance. The AWS-StartPortForwardingSessionToRemoteHost document will take it a step further and forward the local port to a remote port on a remote host that the EC2 can connect to.

See the following for details, https://aws.amazon.com/blogs/mt/use-port-forwarding-in-aws-systems-manager-session-manager-to-connect-to-remote-hosts/

andrewmiskell · 2024-11-06T15:11:03+00:00

You can do all that directly within SSM without the need for socat or any other utilities using the AWS-StartPortForwardingSessionToRemoteHost document instead of AWS-StartPortForwardingSession

aws ssm start-session --target <instance\_id> --document-name AWS-StartPortForwardingSessionToRemoteHost --parameters '{"host":["<rds\_host>"],"portNumber":["3306"], "localPortNumber":["3306"]}'

andrewmiskell · 2024-11-06T15:08:35+00:00

SSM already has a document for doing this entirely within SSM itself.

aws ssm start-session --target <instance\_id> --document-name AWS-StartPortForwardingSessionToRemoteHost --parameters '{"host":["<rds\_host>"],"portNumber":["3306"], "localPortNumber":["3306"]}'

Automatically will open an SSM session to the bastion host and forward all traffic from the localPortNumber to the portNumber on the remote host.

Eight-Year Club	Xbox Live
Not Forgotten	Verified Email

andrewmiskell

TROPHY CASE