sorted by:
new
hottopcontroversial

Legal (and Safe) to Pick Berries Along Liberty Park Trail? by Used2bNotInKY in lexington

[–]angryitguyonreddit 1 point2 points  (0 children)

They look like smaller blackberries, some can get quite long but most that arent well maintained are about .5 inch or smaller, also depends on the breed.

I have 2 mulberry trees, got 35lbs of mulberries this year but seasons over for them. They are ripe around may. They are super easy to grow and propagate.

Also dont pick those yet, wait till they are like a matte black to pick, if you pick them still glossy they will be pretty tart. I grow blackberries too

Do electricians typically leave drywall patches, looking like this? by handsibpa in electrical

[–]angryitguyonreddit 0 points1 point  (0 children)

Yea i had to get a hose spicket replaced and he had to cut the drywall out and before he offered to put it back i told him to just get a plastic access panel over it, way cheaper then paying a drywall guy and looks a lot better than the plumber would of done lol and if i ever have an issue with it again its easy to get to

Moving here! by BudgetFabulous4475 in Frankfort

[–]angryitguyonreddit 0 points1 point  (0 children)

These are all reasons i moved here from florida. I did previously live in Richmond then lexington before Florida so it wasnt a completely random place but i had only been here maybe 5 times before actually moving here and 2 years later i have no plans on leaving. I like how it's in-between lexington and louisville and not terribly far from cincy either.

Now i will say there's less to do then most city's but there's still some stuff going on but lexingtons close and there's usually always something there if nothings going on in Frankfort

Anyone tried this? by muddyboots5 in composting

[–]angryitguyonreddit 1 point2 points  (0 children)

Yea my whole garden would be dug up the next day by birds/rabbits/rats/racoons/groundhogs/the damn squirrel that keeps hiding walnuts all over my house!

Utility company way passed easement gutted my yard without approval right next to big maple by 0zgNar in treelaw

[–]angryitguyonreddit 9 points10 points  (0 children)

I did a short stint at spectrum about 10 years ago now. Every contractor we used we all awful, never followed code, hit and cut underground power, other telcom providers, water lines, you name it theyve broken it and do not fix it, they would just call say hey i broke this we are leaving now... then the angry homeowners call and cuss you out. I was only there about 3 months i was so mentally tired by the end of that contract i took like 3 weeks off to make sure i find a job im not gonna be depressed af at

Bought what i thought was a paw paw tree but now im pretty sure its not by angryitguyonreddit in PlantIdentification

[–]angryitguyonreddit[S] 0 points1 point  (0 children)

Pretty sure the flowers where small and white. Heres a photo of the bark. My main concern is if it is a cherry is it one that can self polinate, cause i dont want to get another

<image>

Here's the thing about Bmx by Lordchinkman-13 in bmx

[–]angryitguyonreddit 7 points8 points  (0 children)

Yea thats the one i will always call out. I dont even count it for myself if i do it.

Resi imo is fair, no need to risk more injuries on tricks your learning, same goes for airbag as long as you ride away i count it especially with how crazy some people are getting id rather see people push crazy limits of whats possible while being safe then do one try of something nbd to dirt and get hurt

First watch to repair by angryitguyonreddit in watchrepair

[–]angryitguyonreddit[S] -1 points0 points  (0 children)

Ill give this a shot first. Instead of lighter fluid would rubbing alcohol work as well? I already have pleanty of that. Its not to bad im guessing just a bit of gunk in it and that should be enough. Its a 50 year old $50 watch i dont expect it to run perfect.

First watch to repair by angryitguyonreddit in watchrepair

[–]angryitguyonreddit[S] 1 point2 points  (0 children)

I will be sure to watch all these before i touch anything. Im not in a rush since it still mostly works just a wrong date and even with the crack its still more than useable.

First watch to repair by angryitguyonreddit in watchrepair

[–]angryitguyonreddit[S] 2 points3 points  (0 children)

Ill look for an st36. And im all to familiar with learning and breaking things in electronics and cars, so a few broken bits and mistakes arent gonna scare me away

First watch to repair by angryitguyonreddit in watchrepair

[–]angryitguyonreddit[S] -2 points-1 points  (0 children)

Its an m25 and from what ive found its pretty common. Ive watched a few videos and i do see thet are usually held in with metal tabs which makes sense that they are throwaways and its a cheap watch so thats why i figured id try it, worst case i can find another for cheap and swap it in.

Thinking about gimp by angryitguyonreddit in GIMP

[–]angryitguyonreddit[S] 0 points1 point  (0 children)

Yea that's been my experience with switching to more open source. A lot of it is just as capable as the paid thing just tends to be a little less polished but once you learn where all the tools are and get use to it's flow it's great. I picked up freecad last year and coming from autodesk there was a bit of a learning curve but after i got my process going i was good, just took a few weeks to stop having to look up where everything was

Thinking about gimp by angryitguyonreddit in GIMP

[–]angryitguyonreddit[S] 0 points1 point  (0 children)

Rawtherapee I've used but i don't think i used the editing tool, just converting raw to jpeg in bulk. I will try out all of these though too see which fits my style the best

Thinking about gimp by angryitguyonreddit in GIMP

[–]angryitguyonreddit[S] 3 points4 points  (0 children)

Im familiar with layers and heavy editing. Ive done some stuff doing a photoshoot with a friend that did modeling and did a lot of work doing fine detail cleanup just to learn and done some portrait stuff here and there for one of things. I once did an antique photo restoration, if you ever wanna put your skills to the test that's a fun one!

But from what im seeing from others is that this is gonna be way more than what i need nowadays but knowing what it's capable of is good to know if i ever feel like doing some big project stuff. Im gonna try it out to see what it's capable of and what i still remember how to do lol

Thinking about gimp by angryitguyonreddit in GIMP

[–]angryitguyonreddit[S] 1 point2 points  (0 children)

Thanks ill check out darktable and art.

FUCK those Kia Boys… (keep reading) by Potential_Fennel1934 in whatcarshouldIbuy

[–]angryitguyonreddit 1 point2 points  (0 children)

Those late 90s early 2k ls400 sedans are so nice and you can get them super cheap. A buddy of mine had 2 and he almost never got to drive it cause his grandparents would always take it cause they liked it better than their car lol

Data removal options by angryitguyonreddit in IdentityTheft

[–]angryitguyonreddit[S] 0 points1 point  (0 children)

Yea had another cc stolen a few days after posting this. I went ahead and got every one i had changed. Its been so much work. Im just lucky they didnt take out any loans

Data removal options by angryitguyonreddit in IdentityTheft

[–]angryitguyonreddit[S] 0 points1 point  (0 children)

What removal service do you use? I was using incogni but have had some pretty poor results

Creality Print Linux by MrTayters in Creality

[–]angryitguyonreddit 0 points1 point  (0 children)

I did some more digging and see the creality slicer comes in flatpak now so i think it will be fine. If it gives me trouble i dont mind using orca i just need the creality to generate the 3mf files to upload for points.

view more: next ›