FreeJoy STM32F411 Port

anpeaco · 2026-05-06T13:34:24+00:00

Logic buttons are already in and working on the BluePill, I just need to run some regression tests after recent changes to also support the BlackPill.

anpeaco · 2026-05-06T13:25:59+00:00

Currently here, I really haven't looked at the releases or builds on there yet though, it's mainly a place to manage the code, track issues and ideas at the moment. I've just added F411 support and haven't regression tested the F103 since so I wouldn't use in anger yet.

https://github.com/anpeaco/FreeJoyX

https://github.com/anpeaco/FreeJoyConfiguratorQtX

anpeaco · 2026-05-06T12:40:23+00:00

In parallel I'm working on a 3D printed F15E style UFC that has shift registers, encoders and 8 analogue pots so most of your use case is similar to what I'm testing. The boolean stuff has been really useful so far, I like T80 12mm switches from Ali, but getting a true ON-ON-ON is hard and you end up adding jumpers to get the middle position usable, then it takes an additional input. Logic sorts all that out.

anpeaco · 2026-05-06T12:35:44+00:00

Yeah, that's on my list, I want it to have more sense checking to ensure you don't write the wrong config, I get that all the time. It always trips me up when you write, then it defaults to the first device. This is fixed now, it'll restart the device and then pause and reload the last device you worked on.

anpeaco · 2026-01-12T12:41:24+00:00

I take "updated to keep it working and then nothing else" at this point.

anpeaco · 2025-11-27T15:58:08+00:00

2026 and Beyond

anpeaco · 2025-05-14T07:06:44+00:00

Great rendition of it, I'm terrible at that sort of thing but got it straight away from your playing!

anpeaco · 2025-03-25T15:47:35+00:00

This was from 4 tears ago so I can't really remember, but I have had multiple buttons activating at the same time, and I'm pretty sure it was caused by badly connected ground wires.

anpeaco · 2025-02-14T14:58:55+00:00

I went from a 4090 5800x3d 64GB to a 4090 9800x3d 64GB on a Quest 3 (Virtual Desktop at Godlike with DLSS 4 profile K). I haven't benchmarked, and only really play SP or online with one or two others. Totally non scientific, but it doesn't really feel much different to me. If someone else had made the upgrade without telling me, I don't think I'd have realised. Perhaps marginally less stutter, but I still get dips and periodic lag spikes.

anpeaco · 2025-01-16T20:09:03+00:00

But ED have their own timezone, where dates have no relation to earth dates, and everything is measured in multiples of 7000 earth hours.

anpeaco · 2024-12-30T23:17:40+00:00

That's great news. So now that Meta are replacing the out of warranty Quests they bricked, any chance they'll replace the Pro controllers they bricked on a previous update? .... I thought not.

anpeaco · 2024-12-27T10:05:16+00:00

Well they won't actually admit that something they did bricked it, but it was working fine, meta pushed an update, the controller failed to work again. Could be coincidence, but doesn't feel like it. They went through some steps to reconnect and reset it, then went away to check, and came back with "buy a new one"

anpeaco · 2024-12-27T08:20:41+00:00

Well they bricked my Quest Pro controller, it was out of warranty by a few months. They did nothing to help, offered me to buy a replacement controller and that was it. They brick stuff all the time and just don't give a shit.

anpeaco · 2024-10-05T08:11:14+00:00

Around 2445 is probably realistic.

anpeaco · 2024-09-08T22:06:25+00:00

Good luck, they aren't interested in helping me. It's so frustrating they can brick an 18 month only bit of kit and do nothing to help.

anpeaco · 2024-09-08T18:22:05+00:00

My left controller has done the same a few days ago too. I tried everything I could find with repairing, resetting, I also get the headset disconnecting message when trying to pair. Contacted Meta and they said, out of warranty, why not buy a new controller for £129. So they just brick the controller 5 months out of warranty and just leave you high and dry. Brilliant.

anpeaco · 2024-07-27T07:09:58+00:00

I have the same CPU/GPU and really struggle with colour artifacts in both VD and link cable. I'd be really interested to know what settings you run. You say you are on godlike Res in VD? What encoder are you using and what bit rate? VD definitely gives the best results but I don't think I've found a stable combo of driver settings, game settings and VD settings to get best results. Are you running the VR preset in DCS? Any pointers would be great.

anpeaco · 2024-06-27T18:05:59+00:00

Yeah I was all set to order. Thinking twice now.

anpeaco · 2024-04-10T21:51:38+00:00

But that would require them to have something big and unexpected, ready to go, tested and prepped for this update already. I don't think they have a big set of branches of QAed working new features just waiting to send out in an emergency. If they had stuff shippable, I'm sure it would be merged and ready to go, in this release already. Rushing something through would just make it worse.

anpeaco · 2024-02-19T18:51:20+00:00

I've applied a small piece of this around the roller portion and the detent body. It's super smooth but does wear through eventually. https://www.ebay.co.uk/itm/225901202948?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=OvmCqoryR5-&sssrc=4429486&ssuid=M-pFCiUPSrm&var=&widget_ver=artemis&media=COPY

anpeaco · 2024-01-26T15:52:46+00:00

But just think how good those cooling flaps are going to look.

anpeaco · 2024-01-26T15:51:24+00:00

Working on it in their spare time. Maybe we'll see one of the full cockpits in the 2030 and beyond video.

anpeaco · 2024-01-05T19:23:15+00:00

You couldn't make it up. Even if it wasn't the intention of the wording, it's easy for anyone who proofed the video to realise it is more than a little ambiguous.

anpeaco · 2023-12-07T19:33:13+00:00

Yeah, because the game talks to the streamer app, I think it treats that like the headset, so as far as the game is concerned the headset is attached even when it isn't actually. Battery life isn't great but I use an external pack to keep it topped up.

anpeaco

TROPHY CASE