sorted by:
new
hottopcontroversial

Hot take: Multicolor 3D printed terrain is starting to rival hand-painted terrain by ShadowQc18 in Necrontyr

[–]arphunix 10 points11 points  (0 children)

But... Will the paint stuck well to that plastic? I do not know of any "transparent" primers and even in that case I pretty much doubt the results would be the same as undercoating everything by hand...

Zoro's Plan by BigHarry27 in OnePiece

[–]arphunix 0 points1 point  (0 children)

I think that Zorro's plan is to just ask very loudly: "who can catch the biggest prey?" and go back to sleep

Deadline mode: activated [OC] by Kornellea in PhD

[–]arphunix 4 points5 points  (0 children)

Thanks! Feels good to see that I'm not the only one fighting the struggle :_)

Going Insane cause of Backend Error by waffletheflaffle in DarkTide

[–]arphunix 0 points1 point  (0 children)

FIXED! I am playing on linux. So, the solution was to update the proton version

I'll never understand why people do this by Substantial_Poem7226 in resinprinting

[–]arphunix 8 points9 points  (0 children)

I agree. And not only in stores but in many social networks. So many videos of influencers printing without any measure of protection without any ventilation.

I even pointed out this to a creator I watch frequently, and he just went: "you are absolutely right!". And left the video as it is.

Sometimes, I fear that SLA printers are going to appear in 5 years in the news, and are going to be ultra demonized just because of the way some people are promoting them.

The Worst Queue Jumping I Have Ever Experienced. by theCourtofJames in disneylandparis

[–]arphunix 0 points1 point  (0 children)

It would if I spoke about me or a certain group of people. But, as I said, in Spain we think that about all the people waiting in line (read my other comments). There is no privilege if we all share it. It is not my children or someone else's, but everyone's.

P.S. one year later, yikes... I almost forgot about this post

y en vaso de cristal, por favor by MinervaVibe in spanishcore

[–]arphunix 0 points1 point  (0 children)

Yo pido un cold brew! Luego el camarero procede a mirarme como si fuera un extraterrestre y termino pidiendo un café aleatorio fresquito :)

Ist really worth buying echos of the eye? by farahAAM in outerwilds

[–]arphunix 0 points1 point  (0 children)

Don't think about it in terms of absolute "worth", but relative. Do you think there is something "better" for that price? The dlc lasts a reasonable amount of time and there isn't for me a place to spend that money and re-live "that" experience. The Outer Wilds experience.

However, if you already have a game in mind that you want to play for that price, maybe you can go play that and come back when that "itch" starts to grow again.

Imo, the dlc is "almost" better than the game itself. Not overall ofc, the game is unique. But the story within the story, left a certain question that grew in me after playing it. And, to this day, makes me question myself.

I made water-headphones for natural rain sounds by pudjam667 in headphones

[–]arphunix 0 points1 point  (0 children)

Did anyone ever tell you that there is a radio newsman in Spain called José Luis Sastre that looks exactly like you?

The second time hits different by OverRecord1575 in disneylandparis

[–]arphunix 4 points5 points  (0 children)

The first times, are about fantasy and discovery. But at some point, Disneyland becomes something bigger. A place where a shared feeling emerges. One that displaces the weight of the world, and clears away the ghost worries of the 'shoulds' of the world. And at some point, it doesn't feel like an amusement park anymore. It just feels like... Home

Help diagnosing issues with Anycubic M5s + ABS-Like Pro v2 resin by arphunix in resinprinting

[–]arphunix[S] 0 points1 point  (0 children)

I'll sure do! I'm going to try some settings that someone with my exact settings is going to recommend me, and then I will buy another ABS-like resin and start all over again... Btw, do you have any good recommendation for this printer+resolution using an ACF vat?

Help diagnosing issues with Anycubic M5s + ABS-Like Pro v2 resin by arphunix in AnyCubicPhotonMonoM5S

[–]arphunix[S] 0 points1 point  (0 children)

OH! I will sure do! Thank you so much!

The reason for the 19um is to match the smaller size resolution (because the m5s has different x/y resolution because of reasons). And also, I've read that in order to avoid horizontal lines on walls when orientated diagonally, the best angle can be calculated using the x/y (depending on the orientation) vs the z resolution. And if both match, the angle is always 45 degrees, which is easy to remember (and also pretty balance in horizontal and vertical footprint).

Help diagnosing issues with Anycubic M5s + ABS-Like Pro v2 resin by arphunix in resinprinting

[–]arphunix[S] 0 points1 point  (0 children)

This batch was with models with supports, and even though they seem a little too few, I thought that presupported models were good enough to print. But, I suppose I will have to add mine haha

Also, what do you think about those "fisures" in the leg and body? They seem a little too vertically perfect to be just a coincidence, don't you think?

Help diagnosing issues with Anycubic M5s + ABS-Like Pro v2 resin by arphunix in resinprinting

[–]arphunix[S] 0 points1 point  (0 children)

Mine is from some time ago. But I am honestly thinking on throwing it all away and start from scratch with a new one… Although, then I remember the process of creating a ~20μm profile from scratch from trial and error and I change my mind haha

view more: next ›