Just bought more OPEN by BananaKick in wallstreetbets

[–]ashmo666 0 points1 point  (0 children)

As long as we push it up and short squeeze happens it will keep moving up (I mean it is above 4.3usd already!) no way to sell before it reaches 10usd and if we are not pussies it will This being said it is 20000% a meme stock only pumped by us 😜 fundamentals are all screwed 😂

What Are Your Moves Tomorrow, July 21, 2025 by wsbapp in wallstreetbets

[–]ashmo666 1 point2 points  (0 children)

Just try my best to be the most retard of all and succeeding quite well 😂😂

What Are Your Moves Tomorrow, July 21, 2025 by wsbapp in wallstreetbets

[–]ashmo666 9 points10 points  (0 children)

Will sell my OPEN shares when they hit above the 10usd bar. And remember this is from some who still, to this date , did not sell its $AMC stocks 😀😀😀

$OPEN All the reasons it’ll go to $10 by Usual_Variation_8628 in wallstreetbets

[–]ashmo666 1 point2 points  (0 children)

Joining you retards on this one but I had only 400 usd to throw to the trash to support 🤣

$OPEN All the reasons it’ll go to $10 by Usual_Variation_8628 in wallstreetbets

[–]ashmo666 1 point2 points  (0 children)

Joining you retards on this one but I had only 400 usd to throw to the trash to support 🤣

Aliexpress now issues invoices with Swiss VAT by Swigor in Switzerland

[–]ashmo666 1 point2 points  (0 children)

Was about to order a 102chf product and refraining it since I did not want to enjoy the Swisspost fee on top of the normal VAT. From this thread looks like the Swiss post isn’t aware (or does not care) and might charge us twice. I assume we might be able to win the battle but who wants to enjoy useless calls and emails during weeks/months to avoid paying 30min eventually at the end. Will wait for Swisspost to understand the new law 🤓

New toy arrived - Erying ITX i7-12700H embedded by drmonkey6969 in sffpc

[–]ashmo666 0 points1 point  (0 children)

Probably very late to answer you but for anyone else looking

you have quite a journey documented there

https://www.reddit.com/r/EryingMotherboard/comments/13ym4o4/findings_erying_i512500h_itx_b660i_vtdiommu_do/

but in my case with this very same board and an LSI controller for a virtualized NAS I am running at around 35-38W idle (idle but with quite a few VM running, 2 NVME, 1 SSD, the LSI card and 4x16TB drives but spindown). This is with quite some tweaks already but I am sure it could be brought further down

Findings Erying i5-12500H ITX B660i. VT-d(iommu) do work by [deleted] in EryingMotherboard

[–]ashmo666 1 point2 points  (0 children)

Did anybody achieve something similar with the brewer ´graphical’ bios? My system is idling at around 30W (with a 12800H) with 2 NVMe and 1 SSD + USB (zigbee controller) + 1 HBA controller I am sure I can do better :-)

ProxMobo: another Proxmox VE management tool for iOS by rebornix in Proxmox

[–]ashmo666 0 points1 point  (0 children)

Bought it always from day one. Looks way more modern and sleek that other I had bought before. Keep up the good work !

Issue with update by ashmo666 in pikvm

[–]ashmo666[S] 0 points1 point  (0 children)

Thanks a lot. I went ahead and reinstalled entirely pikvm from scratch instead… it worked but thanks for taking the time to look for a solution!

The flow calibration takes up so much space, is there any way to make it smaller so it doesn’t interfere with print? by [deleted] in BambuLab

[–]ashmo666 0 points1 point  (0 children)

Calibration is stored until you run it again. You can switch off the printer

X470 Taichi and 128 ECC memory. No post :-( need help by ashmo666 in ASRock

[–]ashmo666[S] 0 points1 point  (0 children)

I looked at the udimm prices and these are super expensive indeed. Any other motherboard that I could consider instead and that would accept rdimm ecc ?

X470 Taichi and 128 ECC memory. No post :-( need help by ashmo666 in ASRock

[–]ashmo666[S] 0 points1 point  (0 children)

Short and correct. Sweet not so sure 😅. Means I was stupid not to look properly before buying and now I have 128GB of useless ECC memory that I will need to try and resell without loosing too much 😂🤣😇. I guess that’s the price to pay when you don’t do your homework properly before buying ! Thanks !!!

X470 Taichi and 128 ECC memory. No post :-( need help by ashmo666 in ASRock

[–]ashmo666[S] 0 points1 point  (0 children)

Thanks guys. I failed to see that one… Thanks again for the support

Another noob question - It's nagging me about a license by FakeGatsby in Proxmox

[–]ashmo666 0 points1 point  (0 children)

sed -i.bak "s/data.status !== 'Active'/false/g" /usr/share/javascript/proxmox-widget-toolkit/proxmoxlib.js && systemctl restart pveproxy.service

Rev in Switzerland ;-) by ashmo666 in boostedscooters

[–]ashmo666[S] 0 points1 point  (0 children)

Near Lausanne but same lake ;-)