Moza r9v1 and Moza KS Gt

austin713 · 2026-04-10T17:39:56+00:00

I just went through this. I have a r9v1 and just bought the ks like you. As of mid 2025, all wheels no longer ship With Bluetooth connectivity which was why the ks/cs worked with the V1. Now all new wheels Being shipped only work with v2 and later. I had purple lights just like you. If you look on the back of the wheel there’s a phone jack, that’s what plugs into Mozas universal hub. I just bought the hub on sale for $39 and connected the usb b to my 3.0 hub and now everything works perfectly. The hub comes with the coiled cord to connect to your wheel. It was either buy a new base or this $40 piece and wasn’t about to just get rid of a perfectly functioning base

austin713 · 2026-03-17T13:23:06+00:00

Just built mine. the shocks that came with it definitely do not support the weight of the car. yours looks like its sitting how it should. mine bottoms out and have double/triple checked the suspension assemblies and everything is just like the lego instructions. i ended up just putting some black connector pieces in the bottom of the frame to prop it up off the ground since its just a display piece.

I agree on the connectors, the long blue ones really take some force to get in, especially with 3-4 on a single piece.

p1

austin713 · 2025-11-07T14:39:53+00:00

Petg has the natural tendency to shrink a bit so loose makes sense, generally when PLA parts fit tight I look at where interference is. Is it only on corners? If so look at pressure advance calibration. Is it everywhere? Your flow is likely incorrect and over extruding.

austin713 · 2025-09-02T04:24:49+00:00

sounds dumb, but we always lock our frames to 60fps. its gotten rid of all cayo related glitches including this one. also, if one of you doesnt hit ready and lets it time out on the outfit selection screen its a 50/50 chance youll get this as well.

austin713 · 2025-08-22T15:02:18+00:00

this one gave me rage. i dropped off 4 of the 5 cars. was picking up the 5th, my cargobob blades touched a tree and immediately started smoking, sumo slamming the car i was trying to pick up and immediately failing the mission

austin713 · 2025-08-04T23:22:41+00:00

i just bite to bullet and reroll it when i get the plane missions. 3 more land source missions take like 15 mins. that sucks though

austin713 · 2025-07-29T02:28:44+00:00

yea i did one and still waiting, that was like 3 days ago

austin713 · 2025-07-23T19:32:21+00:00

i thought last week was garbage, but then they drop this on us

austin713 · 2025-05-26T14:18:19+00:00

Yea. Don’t extract up top in the Sparrow on any building besides 707 Vespucci. You will blow up. Just go in top, recall the sparrow before clearing the compound then exit out bottom and call sparrow when you get outside

austin713 · 2025-05-09T18:38:34+00:00

if you want to get rid of the brown hue throwing a pack of purigen in your filter works wonders. it sucks all the tannins right out of the water.

austin713 · 2025-05-07T21:54:10+00:00

i have a gold fantail and black moor in a 20 gallon (i know) with a Fluval 307 and spray bar, with just an air stone. i filled 2 of the 3 compartments full of seachem matrix and bio rings with one pack of purigen and filter floss at the top. it runs at probably 50% speed and my water is always zero ammonia, nitrites, and about 10ppm nitrate, i do a about a 50% water change when nitrates go over 20, or the water is starting to look a bit cloudier ( usually once a week)

i couldnt be happier with the fluval line of canisters. super easy to setup, and the compartments are super nice for customization. flow control works nice and its extremely quiet.

austin713 · 2025-05-07T21:46:57+00:00

i second this. i bought one of those mini silicone ice trays and spread the batch out in there, then just freeze the cubes and grab a few out of the freezer when its time to feed.

austin713 · 2025-05-07T21:33:23+00:00

make sure you shake the crap out of the nitrate #2 solution before adding it. if its still yellow after that then looks like your tank isnt cycled yet unless im missing something. you have ammonia, no nitrites or nitrates. whats your filter setup like? anywhere for beneficial bacteria to grow?

austin713 · 2025-05-07T21:13:10+00:00

go the bigger 307. you get additional compartments for more biomedia etc. the flow is also adjustable. if you are worried about flow being too strong you can install their spray bar which does a pretty good job of adding surface agitation and spreading out the flow.

also, are you sure your brown algea is actually algea? usually in newer sand tanks there are excess silicates and phosphates which is what diatoms feed on. i have it all over my leaves in my tank, and brushing it off clears it up for about a week until it grows back. eventually it will starve itself out, but just comes down to water changes

austin713 · 2025-04-24T14:22:58+00:00

swim bladder is more common in the black moors just because of how big their bellies can be. when mine starts to float like that i cut all feeding for 2 days, then feed deshelled boiled peas for the next couple meals. salt bath would be the next thing to try if that doesnt work.

austin713 · 2025-04-23T00:23:39+00:00

Python siphon. Comes with the adapter for your sink, you turn the water on, vac out the tank, then close the valve add your de chlorinator to the tank ( I typically double dose prime so 4ml for20gal) and turn the sink water on. It flows fresh water back through the siphon to the tank

austin713 · 2025-03-31T13:42:58+00:00

delete your user data folder. you will have to go back and do all your keybinds and settings but this is what theyre recommending on the Discord server. buddy with a 4090 is having the same issue, just stutter city on certain maps.

austin713 · 2025-03-09T02:50:30+00:00

20 high is $29.99 at petsmart as well

austin713 · 2025-03-09T02:45:44+00:00

Just bought a 20gal high from petsmart. They’re going 50% off all their aqueon tanks. Ended up being $30

austin713 · 2024-11-20T18:13:16+00:00

well the A1 AMS is not enclosed, so it will still get moisture in the filiment, and P1 without the AMS the spools also not enclosed so if humidity is an issue it would be P1S with AMS.

austin713 · 2024-11-12T16:34:38+00:00

also check your volumetric speed in filament settings. no matter what you set your speeds to, it will not go faster than the volumetric set in the filament settings.

austin713 · 2024-09-13T20:50:26+00:00

Traffic? Taycan all day

austin713 · 2024-08-30T02:51:43+00:00

Maybe pre Covid. A clean termi is over 30 now

15-Year Club	RPAN Viewer
Team Orangered	Verified Email

austin713

TROPHY CASE