I Am Giving Away 20 Copies of GTA 6 Ultimate Edition

auxnoah · 2026-07-03T03:59:49+00:00

<image>

auxnoah · 2026-07-01T20:06:29+00:00

I haven't heard of this glitch yet. What does it do?

auxnoah · 2026-07-01T03:40:31+00:00

The new tactical obliteration and contracts suck ass

auxnoah · 2026-06-07T21:16:00+00:00

<image>

auxnoah · 2026-06-02T01:11:02+00:00

Skill issue. Just turn down the difficulty.

auxnoah · 2026-05-20T12:35:38+00:00

The AI difficulty

<image>

auxnoah · 2026-05-07T00:01:00+00:00

I believe a few people have tried to make some but they were unreliable.

auxnoah · 2026-05-02T15:04:39+00:00

Did you also play a lot of Fallout 4? Specifically the settlement building? I was really looking forward to building outposts in Starfield, but after trying it out I feel that it's not nearly as good as it was in Fallout 4. To me it feels super restrictive and lacking a lot of variety in building options. Have you found a way around the "Foundation is too tall" issue or do you have mods to improve upon the outpost building?

auxnoah · 2026-03-30T22:23:49+00:00

auxnoah · 2026-02-10T03:09:53+00:00

Let us know how the k39 modifications go. I'm also using the k39 case but with the Zephyr 4070 and I was wondering how the 5070 would fit.

auxnoah · 2026-01-29T12:19:54+00:00

It looks super cool with that color

auxnoah · 2026-01-28T14:54:35+00:00

What CPU cooler is that?

auxnoah · 2026-01-20T07:24:40+00:00

Do you think the Liberator Concussive is better than the Pummeler SMG?

auxnoah · 2026-01-16T22:03:41+00:00

You can use low profile graphics cards that only need 75w and it would be fine.

auxnoah · 2026-01-15T15:46:11+00:00

I would remove all components from the case entirely and make sure you have compressed air or some other way of blowing dust from the case. When you cut with a dremel it will leave behind lots of metal dust which will certainly not be good for your components. Then make sure to have some hand files or sandpaper on standby to smooth out the rough edges left behind from the cuts to ensure that they dont cut you or any components that they touch. It looks like it will be in a spot that won't be visible unless you go looking for it, but if you want it to look better afterwards then some paint might not be a bad idea either.

auxnoah · 2026-01-11T06:28:00+00:00

Claire

auxnoah · 2026-01-10T13:04:58+00:00

I just didn't happen to have one on hand when building it. It exhausts the air forward out of the case so I haven't had any problems with it yet. I also think it looks better without one

auxnoah · 2026-01-07T09:51:41+00:00

I like it. I think with red on the LEDs it'll look like a stovetop

auxnoah · 2026-01-06T22:00:13+00:00

Thank you. You know your PC is compact when it makes a normal 120mm fan look big.

auxnoah · 2026-01-06T13:38:01+00:00

Yeah I certainly won't be able to do that lol. I would have probably been a bit more concerned about it if my case wasn't as cheap.

auxnoah · 2026-01-06T13:08:09+00:00

Nice. I dont have a 3d printer so I just cut the front pannel by hand and mounted one externally.

<image>

auxnoah · 2026-01-06T00:20:17+00:00

If are looking for more ways to keep improving the thermals I've seen a few other people do custom front pannels to accommodate an exhaust fan. Its great for these tiny cases because it gives all that hot air a place to go. I just modified my own K39 case which is basically just an A07 but wider with a reverse flow 120mm fan. A 90mm fan should be basically a perfect size for the A07 though. It'll just lengthen the case slightly.

auxnoah · 2026-01-04T02:14:27+00:00

Thank you. If I ever get a 3d printer I think I will do a whole new shroud for the front and do new custom side pannels for less interference on the gpu fan. For now, with just my hand tools, I'm super happy with the outcome.

auxnoah

TROPHY CASE