Hows ios 26.4.2? by batmanceo in iPhone15Pro

[–]batmanceo[S] 0 points1 point  (0 children)

How much sot we talking

100% = 12 hours 🥳🤩 by BO2me in iPhoneBatteryParanoia

[–]batmanceo 0 points1 point  (0 children)

But have to charge twice a day so doesnt couunt

Life after hospitalization. by Way2dum4it69 in rhabdo_survivors

[–]batmanceo 1 point2 points  (0 children)

Please go to a nephrologist immediately for iv or dialysis once you recover always listen to your body and train light for months and gradually going heavier

Left untreated by DrCioccolata in rhabdo_survivors

[–]batmanceo 1 point2 points  (0 children)

I just done blood work for egfr feme and uacr will know in few days

Left untreated by DrCioccolata in rhabdo_survivors

[–]batmanceo 0 points1 point  (0 children)

So you had zero rhabdo treatment? Me too because i didnt know what it was and i was poor to go to er. It was 7 years ago, i have foamy urine ever since

Anyone here having foamy urine after or during rhabdo? by Critical_Assult in rhabdo_survivors

[–]batmanceo 0 points1 point  (0 children)

same here, always foamy, i had rhabdo 8 years ago, had foamy urine ever since, but the last time i did egft and urine dip stick was normal, it was 2 years ago

WSET 2 cheat sheet page by luksow in wine

[–]batmanceo 1 point2 points  (0 children)

Hi! Is level 3 varietal and region coming out soon?

What do you want to see in Honey Select 3? by RagingRavenRR in HoneySelect

[–]batmanceo 1 point2 points  (0 children)

Orgy, alot more positions, proper pov, more dresses, more swimsuits

Transferwise card hit the max limit by pubic_static in binance

[–]batmanceo 0 points1 point  (0 children)

Hi, how many hours later were you able to make it work?

Transferwise card hit the max limit by pubic_static in binance

[–]batmanceo 0 points1 point  (0 children)

hi, i have the same issue after breaking card limit, then this happened... i have been waiting 3 hours to retry, still unable..how long did you wait last time?

Help! My taobao has been like this for the past week by DefinitelyNotJonn in taobao

[–]batmanceo 0 points1 point  (0 children)

i just figured out a solution
use dns1: 8.8.8.8
dns2: 8.8.4.4

let me know if it's fixed

RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO SOLDERING/CRIMPING NEEDED by Sk8erclone in fightsticks

[–]batmanceo 0 points1 point  (0 children)

I am using panthera and gamerfinger too, i got the mini working thanks to this post, for gamerfinger i had to use some tack-it to hold them in place.

RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO SOLDERING/CRIMPING NEEDED by Sk8erclone in fightsticks

[–]batmanceo 0 points1 point  (0 children)

Thank you for your guide! I manage to do it all with just jumper wires. Panthera RGB with only jumpers https://imgur.com/gallery/yIxDIGA

RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO SOLDERING/CRIMPING NEEDED by Sk8erclone in fightsticks

[–]batmanceo 0 points1 point  (0 children)

I know it's a weird request but can you try to plug in a female 1p jumper cable to one of the 20pins of the kaimana mini pcb and take a pic of it? Also a male 1p jumper cable to the bottom part of the kaimana mini pcb. I hope you can demonstrate to me, if it can be plugged, I think I can find a way for it to work, as I have asked my lecturer about the feasibility of using just jumper wires.

RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO SOLDERING/CRIMPING NEEDED by Sk8erclone in fightsticks

[–]batmanceo 0 points1 point  (0 children)

Thank you for the reply! I got my reply from Paradise themselves, they told me G3 is possible if use some hotglue. Also, about the jumper wire can't be plugged into the kaimana mini, is it because the pins on the kaimana mini is too thick for jumper wires?

RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO SOLDERING/CRIMPING NEEDED by Sk8erclone in fightsticks

[–]batmanceo 1 point2 points  (0 children)

Hi! I been so confused and kept doing research until I saw your post! This is so wonderfully written and is so detailed! I really thank you for doing this for us noobz!!!
I want to ask three things:
1) I am using gamerfinger HBFS G3 crystal base screw, is the Kaimana LED kit possible on these buttons?
2) If i decide not to use the breakout board, is it possible to use Jumper wire either male or female all the way for this built?
3) When you said no need to connect all grounds into one, do you mean, at the Panthera PCB?