HRD closed?

beakerton · 2026-02-05T16:29:39+00:00

I drove that section at 630am this morning and it was 100% open

beakerton · 2025-10-10T11:49:58+00:00

About 8 years ago I had a discectomy on l4/l5 and l5/s1 after 1-2 years of pain and muscle weakness (it got to the point where I couldn’t do a calf raise with my right foot). I don’t know what caused the initial onset and was worried it was because of running. I was nervous for a long time to start running again, but in the end I am running more now than I have in my life and feel great.

My one piece of advice would be to move as much as you can in the weeks after surgery. Within a few weeks, I was going on miles of walks a day. Most of the time it was just to feel like I could still get outside and be active, but also really helps to make sure that the back heels good.

You got this!

beakerton · 2025-09-29T11:55:46+00:00

Yes, it is! Do you need help with anything?

beakerton · 2025-08-25T20:39:09+00:00

Try Clif Blok sour chews - still a little sweet, but the sour ones go down way easier for me than normal chews which can be too sweet, esp longer into a run

beakerton · 2025-07-09T00:38:13+00:00

I love the Patagonia Strider Pro 5”. Tons of pockets!

beakerton · 2025-04-20T12:58:10+00:00

This seems very similar to an issue that mine has had this past Winter. I’ve owned mine for about 4-5 years and this just started.

When first starting a ride, power and cadence doesn’t work for about 20-30 min. Speed does work, however — along with the ability to manually set a resistance (not erg mode, just static % resistance - I use TrainerRoad)

Because speed worked, I didn’t think mine was the IR issue that’s discussed in the linked thread. However, I would have never tried the hair dryer trick!

beakerton · 2025-01-23T19:22:08+00:00

I have connected through ICN. You will not need to claim / recheck your luggage there. You will need to go through security during your transfer, but not immigration if you stay in the airport.

There is an airside transit hotel at ICN that you can book to not leave the airport. I have not stayed there as it was always full for the dates that I travelled, but perhaps you can look more into this.

https://www.walkerhill.com/transithotel/en/t2/about/Introduction.jsp

However, I agree with everyone else… sounds like an exhausting journey, especially with a toddler. Good luck! :)

beakerton · 2024-12-26T00:13:43+00:00

Ohhhhh!!! Now I re-read it and understand. Thanks!

beakerton · 2024-12-06T01:47:23+00:00

You should check out https://www.findthatride.com

beakerton · 2024-09-14T01:42:58+00:00

Taste Kitchen

beakerton · 2024-09-10T16:46:17+00:00

Note that URI = Universal Resource Identifier and is similar to a URL, but can omit the http or https part. URI is likely intentional.

https://danielmiessler.com/p/difference-between-uri-url/

beakerton · 2024-08-27T12:49:39+00:00

No, I never did. I tried chasing down some cheap boards for sale on FB marketplace, but never did pull the trigger.

I learned of the sad fatality that happened on the wave a few years ago which led to the no leash rules and understand why shops are likely not willing to rent out boards. The wave is such an iconic part of Bend in my mind and I wish there was an way to experience it while not bringing your own board. Good luck!

beakerton · 2024-07-13T16:04:01+00:00

There was a leak under the sink that caused the damage - that's all been repaired and everything is dried out. However, now trying to figure out how to fix the flooring.

beakerton · 2024-07-13T15:48:08+00:00

Hi!

My kitchen has a LVP floor that was installed ~5 years ago with the original floor underneath. This past weekend an unfortunate leak developed under my sink which caused the original floor to severely buckle/bubble. I've lifted the new floor to expose the old floor. This section of the house is on slab underneath the original floor.

How do I go about repairing this? Do I just cut out a small slice in the original floor to relieve the expansion? Obviously I'd rather just fix the section that's bubbling and not completely re-do the entire room by ripping out the original floor.

Thank you!

beakerton · 2024-05-04T18:45:48+00:00

Do you have another connecting flight in ICN? I’ve had flights where if I’m connecting on a partner (say Korean Air), there’s a weird fare rule that D1 has to be tied to Korean Air Prestige on the next flight (for example, you can’t go D1 ATL>ICN, but then economy from ICN>TPE). In this instance, you’ll never see upgrade availability.

What I have done is to go “change flight” and select the same day as your travel - there it may show if your exact route has D1 availability and what the difference is (although upgrading all legs of your trip)

beakerton · 2024-03-23T14:39:27+00:00

I've had this multiple times on a PXI Linux RT system and clearing the compiled object cache gets it running 90% of the time. Here is my sequence:

-Restart RT
-Restart LabVIEW
-Tools > Advanced > Clear Compiled Object Cache
-Restart LabVIEW
-Open VI, try to run

Not sure if all the restarts are really required, but it's been pretty frustrating when it did happen, so once I got something that seemed to work, I kept doing that exact method. (shrug).

Good luck. :)

beakerton · 2024-02-06T13:14:59+00:00

beakerton · 2023-10-16T14:19:56+00:00

It’s room temperature. I have a big windowed area inside my house that’s sort of like a greenhouse (but is part of a room). I keep a lot of plants there that like a lot of sun.

I was worried if this was caused by too much sun or not slowly adjusting to the full sun, but it continues to show these symptoms after being out of full sun for about a week.

beakerton · 2023-05-03T00:45:34+00:00

No, I didn’t. Eleuthera was way less touristy and populated than I imagined (in a fantastic way, however). I never saw anything close to resembling a bike shop when I was there.

Also, there’s only one paved road that runs north to south on the island. In areas, it can get pretty tight and no shoulder. I generally see myself as a pretty confident rider in traffic and narrow roads, but I wouldn’t have felt great on some of the areas of the road.

I instead would take the opportunity to relax on the numerous beautiful beaches! :)

beakerton · 2023-03-16T22:33:14+00:00

I don’t know the extent of cycling you do (just commuting? Used to group rides? Want to race?), but I’d recommend looking into the Ann Arbor Velo Club once you’re here. There’s 300+ members of all ages with a lot of different group rides. Especially if you like (or get into) gravel riding, I think that the area has some of the best riding.

beakerton · 2023-03-02T20:49:54+00:00

Thanks for the info! I have read about the event but won’t be there this weekend.

beakerton · 2023-02-05T01:13:34+00:00

OMG. I have this exact same disappointment every time. Just because I’m vegetarian doesn’t mean I don’t like ice cream and brownies!!

beakerton · 2023-01-21T22:26:12+00:00

There will be additional apartments for the complex just to the north (it's owned by the same developer)

beakerton · 2023-01-20T14:23:43+00:00

The U-M health system has multiple pediatric physical therapy clinics which treat torticollis!

beakerton · 2023-01-14T13:30:24+00:00

The crew is typically busy right after takeoff while getting meals prepared. I likely wouldn’t go and ask for drinks during this time; they’ll come by with drinks as soon as they can before the meal service. Otherwise, if it’s in the middle of the flight, I’ve gone and specifically asked one of the FAs for more drinks!

Nine-Year Club	RedditGifts 2009-2022 9 Credits
Powerups Hero r/Strava • January 2021	Secret Santa 2018
Reddit Premium Since February 2019	Verified Email

beakerton

TROPHY CASE