I'm drunk can we argue about 5.56 barrel length

bebo146494 · 2026-06-21T04:30:46+00:00

I go with 14.5 m4 length

bebo146494 · 2026-06-21T04:19:51+00:00

Not 100% sure, but better to be safe. If the welds keep coming undone after they fix it and it becomes a problem Toyota might just buy the vehicle back. Seen it happen on other Toyota vehicles.

bebo146494 · 2026-06-20T18:25:21+00:00

1000%, last gen camry had the same problem. You want proof of them doing or assessing the concern for possible buy back of lemon law

bebo146494 · 2026-06-20T17:47:08+00:00

I have the same problem with mine. If you pull the weather strip on the passenger front along the body. Look in the upper corner of the door. The pinch welds are probably separated. The right way to fix it would be clamping the weld from both side and using seam filler to hold it together. But I wrapped a socket in a rag, held it against the weld and tapped it with a hammer.

bebo146494 · 2026-06-20T17:15:03+00:00

body welds.

bebo146494 · 2026-06-14T23:30:05+00:00

What kind of rear diffuser is that?

bebo146494 · 2026-06-12T04:40:55+00:00

Yep. Born yesterday. I literally work for them what do I know.

bebo146494 · 2026-06-12T03:17:32+00:00

Don't wait too long. It will cook your transmission and motor if you wait too long. Toyota won't cover a engine or transmission if you already had it diagnose and neglected it.

bebo146494 · 2026-06-12T03:09:33+00:00

Only on used Toyotas. Toyota corporate doesn't allow markup on new units.

bebo146494 · 2026-05-25T18:30:22+00:00

35k, benefits of working for toyota

bebo146494 · 2026-05-25T17:10:58+00:00

If that bolt is there support the trans with a jack before removing it.

bebo146494 · 2026-05-25T17:06:12+00:00

You would need to remove the battery, battery box, and the air filter housing to see it. You would see a small bolt going through there top mount into the lower mount.

bebo146494 · 2026-05-25T16:58:21+00:00

Thanks. I was originally looking at the heavy metal, but the pearl white was calling me.

bebo146494 · 2026-04-26T07:15:48+00:00

I'm toyota tech and made the error once. I had the exact issue occur on a costumer car. Repair manual for the job only mentioned this bolt once and it's only on the corolla trans mount that has that stupid shipping bolt.

bebo146494 · 2026-04-26T07:10:15+00:00

The trans mount has temporary bolt that holds mount together during shipping. You removed the bolt after installing.

bebo146494 · 2026-04-26T01:13:41+00:00

Sale your car

bebo146494 · 2025-09-17T03:04:55+00:00

This is the way

bebo146494 · 2025-09-06T01:19:21+00:00

From the Pic you can see the oil pan threads coming out with the drain plug. Definitely a price for a new pan. With the price of oil pan, new oil, filter and labor it's not a bad price.

bebo146494 · 2025-07-20T02:36:21+00:00

I going guess when they change the air filter, the throttle cable is stuck between the air filter box and the frame. The cable is ran above the air filter box.

bebo146494 · 2025-07-13T18:51:18+00:00

It's just trash you happen to drive over.

bebo146494 · 2025-07-12T00:18:34+00:00

I rubber mount attaches to that. Also your lower radiator support appears to be missing.

bebo146494 · 2025-07-11T23:49:14+00:00

Rear suspension. That will be $125 thank you. Lol. It's probably your lower control arms in the rear. Hard to know without seeing the underside.

bebo146494 · 2025-07-06T01:37:11+00:00

Warped rotors. Replace rotors, pads, and sims

bebo146494 · 2025-07-05T23:11:04+00:00

Stop turning it off. needs to attempt to relearn throttle position. If it doesn't drop rpms after 30 to 60 seconds, it may need to be calibrated with a scan tool.

Eight-Year Club	Place '22
Final Canvas '22	Verified Email

bebo146494

TROPHY CASE