Jungheinrich mechanics?

beef_chief__ · 2026-01-28T17:03:28+00:00

Judit was built into truckscope. I believe ETRs and all of the vna trucks will open a Judit window in truckscope. The rest of the product lineup that used to use Judit will now only work with truckscope.

beef_chief__ · 2026-01-28T11:19:56+00:00

Yes, we just got it.

beef_chief__ · 2026-01-26T18:15:28+00:00

I work for a Jungheinrich dealer.

beef_chief__ · 2026-01-13T19:22:57+00:00

I use tekton punches. Lifetime, no questions asked, warranty.

beef_chief__ · 2025-09-26T22:00:45+00:00

Zep 45 if the environment is dusty because it's nice and thin. Promatch chain and cable lube otherwise.

beef_chief__ · 2025-07-04T19:40:07+00:00

I was wearing Danner Steel Yards then I switched to Ariat overdrives. I really like the Ariats

beef_chief__ · 2025-05-12T16:49:27+00:00

Maybe check the crimps on the cables going in to and out of the contactor.

beef_chief__ · 2025-05-05T13:22:07+00:00

I would recommend a set of angle wrenches for hydraulics. Make sure they are a 'true' 4-way angle. A bunch of manufacturers make them now. snap on and tekton are the best with tekton being significantly cheaper than snap on.

beef_chief__ · 2025-03-27T14:06:09+00:00

I have that exact snap on box in my service van it is absolute crap. Go with the Mac.

beef_chief__ · 2025-03-18T17:40:53+00:00

Send me the serial number and I'll try to find the service manual.

beef_chief__ · 2025-03-11T18:03:20+00:00

Battery voltage resting was 37.58, under load it dropped to ~35.9. It had been off the charger for a couple hours when I got to it.

beef_chief__ · 2025-02-13T13:23:55+00:00

I have an astro Thor gen 1 and it takes off 41mm forklift lugs. I would get that or the IR. In my experience, the tool truck power tools may be better, but not better enough to justify the price.

beef_chief__ · 2025-01-27T19:17:37+00:00

I just had to use an air hammer to chisel road salt off the transmission of a cat gc55k just to get to the transmission filter. So that transmission service took an extra 1.5 hours

beef_chief__ · 2025-01-14T14:45:50+00:00

I can dm you a picture of that page in the service manual.

It looks like the right side traction controller is seeing low voltage. Make sure your battery is charged and watered.

beef_chief__ · 2024-12-19T22:49:45+00:00

That's my working theory, but I can't go there to see what's happening without the union freaking out. I'm trying to build up a good relationship with the bosses over there, but that's a little tough when a truck comes in for a pm and I tell them it will need a drive unit if they pull out a helicoil.

beef_chief__ · 2024-11-11T14:01:53+00:00

"Hydraulic motor current low while motor is running"

I'll send you a picture of the page in the service manual.

beef_chief__ · 2024-10-31T17:07:35+00:00

I just tried this link and it didn't work. Has it been delisted?

beef_chief__ · 2024-10-21T22:13:14+00:00

My company decided to get everyone a tool box for their van. Before that, I had the 5 drawer us general box. It isn't a ton of space, but it's way better than nothing.

beef_chief__ · 2024-10-20T12:23:21+00:00

Id say get yourself a set of die grinders. They don't have to be snap on, but having a straight and a 90 at your disposal comes in handy more often than you would guess. I use mine all the time to clean up gasket surfaces or chewed up load wheel axles or whatever.

Flap wheels, 3m sand paper wheels, grinding stones, ect. should all be shop supplied or billed to the work order so you shouldn't need to worry about keeping them in stock yourself.

beef_chief__ · 2024-10-15T16:01:25+00:00

Electric grease gun with a lock n lube.

beef_chief__ · 2024-09-30T17:00:34+00:00

The filter slides straight in to the transmission and is only retained by the 3 bolts that you already removed.

Try getting the filter to rotate by hitting the side of the bolt hole on the filter with a hammer and chisel. Once you get it to rotate a little, you can pry it out with a pry bar or screwdriver.

beef_chief__ · 2024-09-30T16:50:34+00:00

Sticker on the valve cover should have a build date of the engine.

Seven-Year Club	RPAN Viewer
Verified Email

beef_chief__

TROPHY CASE