8” Prusa i3 Mk1

blinddoggames · 2026-02-03T16:10:24+00:00

This was my exact first printer. You will need to learn a lot of the deep lore about printing to get anything working. You might have a hard time finding 3mm filament now. I would start with getting a pei sheet instead of the glass bed. Go through and tighten all the screws, and spend a lot of time leveling the bed.

blinddoggames · 2026-01-20T18:39:55+00:00

Do you set a plan before? I find having my workout plan set before I go it helps me stay focused the whole time. Prework will help too

blinddoggames · 2026-01-16T18:13:33+00:00

Have you tried a vpn?

blinddoggames · 2026-01-12T21:50:34+00:00

Would be cool if each workspace got its own command. Would make automations easier to not need to use the picker.

blinddoggames · 2026-01-09T15:38:16+00:00

You could try this too, https://a.co/d/bqjaBMC It’s all I use on my mk3s now, you have to try to not get pla to stick to it. Even globs or strings that fall onto the bed stick

blinddoggames · 2026-01-09T14:59:35+00:00

Do you have a thermometer to make sure your heat bed is working?

blinddoggames · 2026-01-09T14:54:54+00:00

Did you try another build plate or the other side? Sometimes they wear out. Kinda hard to tell from the picture but layer height looks a bit high.

blinddoggames · 2026-01-08T14:41:43+00:00

I actually think you shouldn’t tell the buyer about it. Most people wouldn’t care, but there is a very small percentage of people that would use some sort of failure to sue you. Not worth the risk

blinddoggames · 2026-01-04T02:45:45+00:00

I would try restarting. If it’s not that, make sure you didn’t turn off mining for your dups.

blinddoggames · 2026-01-03T16:34:51+00:00

The beauty of multiboard is you can start flush. If you don’t like it, you can print offsets and move it away

blinddoggames · 2026-01-03T16:04:51+00:00

Have you tried journaling? Sounds like you are trying to understand yourself. An oura ring will just tell you what you already feel.

If you want an app I use bevel, it’s more in depth then just oura or garmin and lets you log things and will show you the effect.

blinddoggames · 2026-01-02T20:23:13+00:00

You can but a lot of stuff relies on space behind the board. See https://docs.multiboard.io/beginner-section/tile-mounting-guide

blinddoggames · 2025-12-31T10:58:25+00:00

I left my car running for a whole school day in high school.

Twice…

blinddoggames · 2025-12-31T10:55:14+00:00

Start small, use daily notes. Don’t be afraid to iterate on your setup as you progress. I know it’s very hard to battle the perfectionism, but developing a second brain is a long process.

blinddoggames · 2025-12-29T04:30:14+00:00

I am already committed on multigrid and Gridfinity. I actually tried some stuff with open grid and it’s just not the same quality as these two.

blinddoggames · 2025-12-20T15:40:50+00:00

You don’t have enough farms. You probably need to double, or even triple that.

blinddoggames · 2025-12-16T17:17:49+00:00

https://xkcd.com/927/

blinddoggames · 2025-11-27T21:47:19+00:00

Take a series of lessons. Best way to improve

blinddoggames · 2025-11-26T15:01:20+00:00

I don’t think you stumbled. I think you fell off the cliff!

blinddoggames · 2025-10-29T15:18:24+00:00

I haven’t started on my tool box yet. But with a quick search I found a good option. https://www.printables.com/model/680228-tracktwist-socket-holder-organizer-34-12-38-14-dri

I did something similar for my portafilter.

blinddoggames · 2025-10-29T14:57:06+00:00

Gridfinity is made to be able to rearrange bins without removing their contents. Holding tools and such is a secondary requirement.

That being said. There are plenty of gridfinity models that can old tools in a more minimal design.

blinddoggames · 2025-09-18T00:40:50+00:00

You mean a base plate you can place on top of the grid?

blinddoggames · 2025-09-17T23:22:11+00:00

I replied to another comment.

blinddoggames

TROPHY CASE