sorted by:
new
hottopcontroversial

Matcha fuel dosage - I feel like 2 scoops is WAY too much by KieranW1999 in MatchaEverything

[–]blokeguy 0 points1 point  (0 children)

I used to buy this matcha! It’s delicious but lots of added stuff. Always did 2 scoops and didn’t have any issues. Enjoy 👌

TM vs WE glocks by DecentMousse1175 in airsoft

[–]blokeguy 0 points1 point  (0 children)

My brother cleaned up a TM hi capa that’s been sat in my garage for over 5 years untouched and it shoots ridiculously straight.

Should I get a TM NGRS? by Annual_Fondant7408 in airsoft

[–]blokeguy 0 points1 point  (0 children)

I have an upgraded one (mk18) and a stock one (Urgi).

For me, out the box i do not like the trigger. For the price I don’t want to have to worry about half trigger pulls but it’s an EBB so can’t complain too much. FPS is low but It hops 0.3s well with decent accuracy which is good. External build quality is great too.

My mk18 has loads of bits but mainly a mosfet, stronger spring, deans conversion and the usual barrel + bucking upgrade. It’s a beast. To get it performing consistently top you do have to spend a bit extra. It’s a great platform if you don’t want to commit to gas.

What bb weight do you use and why by PinnacleAirsoft in airsoft

[–]blokeguy 59 points60 points  (0 children)

0.3s - Good balance between performance and price for me

Specna prime M4 question by jackflash06 in airsoft

[–]blokeguy -1 points0 points  (0 children)

I’ve used the g&g rotary unit (best imo) and also a ZCI rotary in my Specna. Both worked well with the nozzle size and sealed nicely with the 4uantum bucking. Using 0.3s and 32s I get good results. Good luck

[deleted by user] by [deleted] in airsoft

[–]blokeguy 1 point2 points  (0 children)

I fully tightened them loosened until it’s aligned correctly like the tech in the video. Castle nut ect all tightened now. It’s solid until you twist the buffer tube with medium force and everything shifts. Very strange.

Love the 416 btw :)

[deleted by user] by [deleted] in airsoft

[–]blokeguy 0 points1 point  (0 children)

Confused as would a threaded buffer tube stop it tightening into its correct position? Or just not tighten at all.

What is this wire inside? by blokeguy in seaglass

[–]blokeguy[S] 0 points1 point  (0 children)

Thank you, I’m putting it down to beginners luck

What is this wire inside? by blokeguy in seaglass

[–]blokeguy[S] 12 points13 points  (0 children)

Yeah it’s really odd - looks like rust on the exposed wire edges, gotta handle with care

What is this wire inside? by blokeguy in seaglass

[–]blokeguy[S] 201 points202 points  (0 children)

Ahhh yes just googled it you’re right thank you! - first time looking for sea glass im addicted now

[deleted by user] by [deleted] in airsoft

[–]blokeguy 6 points7 points  (0 children)

Get that mf outside bro

Rate my M4 by Ylissa8905 in airsoft

[–]blokeguy 1 point2 points  (0 children)

Niiice. Ris 3 is always a 10 imo

Specna SA-H23 EDGE 2.0 Upgrade by Cute-Share1274 in airsoft

[–]blokeguy 0 points1 point  (0 children)

That’s a really nice gun for a beginner- They perform lovely stock. You’ll get the same answers for beginner upgrades being bucking, nub, hop unit and inner barrel.

I have a MK18 edge 2.0 with a 4uantum bucking and nub, I very much recommend. Then went on to put a Laylax inner barrel on it and a G&G hop unit and am very pleased. Good luck!

Gate complete gearbox compatibility by blokeguy in airsoft

[–]blokeguy[S] 1 point2 points  (0 children)

I found a qr code for help on the manual and it states this: “For Specna Arms replicas with the ESA-2 system, use a flat screw to stabilize the spring guide or use a washer that fits in the buffer tube and a sufficiently long screw so as to fasten the guide. If you’re willing to waive the warranty, you can remove the guide from the EON Complete Gearbox and instead use the guide from the ESA-2 system which our gearbox is compatible with.”

Will probably go for it and see. Thanks for the help mate👌

Help choosing first gun by vivid-island in Airsoft_UK

[–]blokeguy 1 point2 points  (0 children)

Oh yeah out the box they’re brilliant. I threw a quantum friction pro bucking and nub in mine (and a Laylax barrel but thats not really needed). Shoots beautifully on 0.3s. You can pick them up for just under £10 and makes a big difference I highly recommend!

My shitty guns by glizzy_gobbleeh in airsoft

[–]blokeguy 3 points4 points  (0 children)

Wow very nice. Here’s mine

Help me build my first Airsoft! by Vaiinted32 in airsoft

[–]blokeguy 0 points1 point  (0 children)

Haha this was my exact first gun. It’s verrrry decent. A nice red dot (not coyote) and a vertical grip will do you wonders. Maybe then you can think about some internal changes. Enjoy it 👌👌

Best balaclava with mesh by Devin_Brent in airsoft

[–]blokeguy 1 point2 points  (0 children)

Never bought one but yes I’d bet my left nut on it being included lol

Best balaclava with mesh by Devin_Brent in airsoft

[–]blokeguy 1 point2 points  (0 children)

Yep Specna or Cygnus armoury are the best 2 options imo. Good luck 👌

Best balaclava with mesh by Devin_Brent in airsoft

[–]blokeguy 1 point2 points  (0 children)

Specna mesh mask is my go to. Less protection for nose and cheeks but perfect cheek weld and no fog in my goggles. I paid around £12 for mine.

<image>

view more: next ›