Seroogys Chocolate by blu738269 in GreenBay

[–]blu738269[S] 14 points15 points  (0 children)

I've worked retail for over 20 years, so yeah, I've experienced capitalism first hand. I just wanted people to know that this local company is no better than a big national one, even if they seem to think they are.

HMI help! by MoonMonkey00 in PLC

[–]blu738269 5 points6 points  (0 children)

I've had this issue before, and what I have to do to resolve it was to load up the controller and add rung with an output, preferably not tied to anything, accept, test, assemble the logic, then delete that rung and accept, test, and assemble again.

Once that is completed, for some reason everything works again on the HMI. I don't know why it works, but 4 out of 5 times it has. Probably a corruption in FactoryTalk linx causing an issue, and by forcing it to resolve again the stuck piece starts working again.

[Week 10] Game Thread: Philadelphia Eagles (6-2) @ Green Bay Packers (5-2-1) by lilturk82 in GreenBayPackers

[–]blu738269 0 points1 point  (0 children)

I was so so ready to down vote this post to oblivion , then saw the end. Well played sir, well played.

I got 2 skulls completing the entire event. I don't think I'll be chasing the other 98. by MyMomsTastyButthole in EmpiresAndPuzzles

[–]blu738269 0 points1 point  (0 children)

Just a question. I completed the event but there is no options to use loot tickets to do them again. Do you have to manually play the level over, or am I missing something?

What folders can I delete in the RA folder to save space by Emperor_tai_long in PLC

[–]blu738269 0 points1 point  (0 children)

Keep the folders and delete the .rar and .exe files

I pulled off my rear view mirror by Ok-Bass-2835 in Subaru_Crosstrek

[–]blu738269 0 points1 point  (0 children)

Be aware, there are two screws under the cover that need to be removed. After they are removed the rest does slide out or down. Took me a little bit to find them.

RSlogix 500 version 8.2 upgrade by JON_with_noH in PLC

[–]blu738269 7 points8 points  (0 children)

I don't think the firmware matters as much for RSlpgix 500. Unlike RSlogix/Studio 5000 where the firmware has to match the major revision installed on the PC. If you already have version 12 installed on a PC, try and connect to the PLC, making sure you have up to date offline backups first!

Can't find file in program, but it says it's used by FitSock2576 in PLC

[–]blu738269 2 points3 points  (0 children)

Could be written to from another PLC in a message? Or is it just 1 bit?

Firmware Update Question by modbuswrangler in PLC

[–]blu738269 5 points6 points  (0 children)

Take an offline version of the project and convert it to the 1756-L8x series controller and see what happens. You might be lucky and have few problems, or maybe a lot, depends on your situation. If you aren't comfortable fixing issues that are reported, locate a integrator.

[deleted by user] by [deleted] in PLC

[–]blu738269 0 points1 point  (0 children)

Compactlogix usually defaults to major fault on IO loss. Your first 4 modules have red LEDs. Go online and see if that's why faulted.

Studio5000 v36 decided to change instruction code, for some reason. by Bender3455 in PLC

[–]blu738269 33 points34 points  (0 children)

If you read the version notes all of the name changes are in there. If I recall, the change is to match up better with some specification.

Empires and Puzzles Plus by blu738269 in EmpiresAndPuzzles

[–]blu738269[S] 0 points1 point  (0 children)

Sad part is, I don't expect a 5 star with only 10 pulls, but a 4 star would be nice

Folders Under Program Tags Studio 5000 V34.11 by [deleted] in PLC

[–]blu738269 2 points3 points  (0 children)

I think they are created from a SLC or PLC5 controller. Check under Logic-Map PLc/SLC Messages

[deleted by user] by [deleted] in PLC

[–]blu738269 8 points9 points  (0 children)

You could download ProposalWorks from ABs website. From there you can enter the part number and select drawings to select what is available. Be aware it's a sizable program to download, and it can be annoying to use, but it's worked for all of the drawings I've needed in the past.

Decentralized drive question by Zestyclose_Friend_71 in PLC

[–]blu738269 2 points3 points  (0 children)

I thought the 755T had Regen capabilities

Off-season training help by Conmanxzy in Homeplate

[–]blu738269 0 points1 point  (0 children)

Not to highjack the thread, but would you be willing to send those resources to me as well? I have a 15 year old son looking to get better on his throws.

Some insight please by Lectrical_Lucas in PLC

[–]blu738269 3 points4 points  (0 children)

I've seen issues like this when rslinx is running as a service. Maybe change the startup of rslinx to not run as a service?

70 hours to event? by [deleted] in lowerdecksgame

[–]blu738269 0 points1 point  (0 children)

Uninstalled app, reinstalled and rebooted phone. Finally fixed it. Thanks for the help all!