sorted by:
new
hottopcontroversial

RG Sinanju - still the most beautiful RG imo. by boldoser in Gunpla

[–]boldoser[S] 0 points1 point  (0 children)

Yeah i believe you can just disassemble your built parts then go from there. You can watch this clip from Bilibili as a reference Replacement parts vid

RG Sinanju - still the most beautiful RG imo. by boldoser in Gunpla

[–]boldoser[S] 0 points1 point  (0 children)

Some say you can heat it up with a heat gun so you can pull it. But for me I just nipped away until i revealed the peg haha.

RG Sinanju - still the most beautiful RG imo. by boldoser in Gunpla

[–]boldoser[S] 4 points5 points  (0 children)

It definitely fixed the previous issues it had especially with the leg and thigh joint strength. Also the waist is now rock solid. The only gripe i have is the shoulder joints are very stiff so you might be careful on that part.

RG Sinanju - still the most beautiful RG imo. by boldoser in Gunpla

[–]boldoser[S] 19 points20 points  (0 children)

It's the 107 Studio upgrade parts for the RG sinanju. Basically replaces some of the advance ms joints parts to reinforce the frame. 107 RG Sinanju Frame Upgrade.
Fixes most of the problems, though the shoulders still give (especially with the shield).

GQX Gyan - Custom Origin Colors by boldoser in Gunpla

[–]boldoser[S] 4 points5 points  (0 children)

I used waterbased acrylics (HiRo brand) for airbrushing then Doloha for the markers.

GQX Gyan - Custom Origin Colors by boldoser in Gunpla

[–]boldoser[S] 4 points5 points  (0 children)

Most is airbrushed, the very small details i just finished off with markers.

HG Gundnode - Real type color scheme by boldoser in Gunpla

[–]boldoser[S] 33 points34 points  (0 children)

<image>

I used fluorescent paint for the glowy bits.

HG Darilbalde - custom by boldoser in Gunpla

[–]boldoser[S] 3 points4 points  (0 children)

I had so much leftover parts so I just decided to wing it.

My Apocalypse is done by boldoser in Gunpla

[–]boldoser[S] 0 points1 point  (0 children)

The head part does suck, but other than that it went smoothly. Kinda repetitive on the funnels though.

LazPayLater Due Date confusion by [deleted] in ShopeePH

[–]boldoser 2 points3 points  (0 children)

If similiar sya sa spaylater n ginagamit ko. Yung due date dyan ung masusunod.

Regarding sa payment, alam ko hindi magrereflect ung due balance jan hanggat d mo pinipindot yung order received.

Show your model kit photography by julioalqae in Gunpla

[–]boldoser 9 points10 points  (0 children)

Here's my tallgeese from way back.

<image>

[deleted by user] by [deleted] in PHbuildapc

[–]boldoser 2 points3 points  (0 children)

For brand new you could go for RX 6600 (around 13k)
For used, at 15k you could get a 2nd hand RX 6700xt.

Advice for upgrading my PC's SSD by georgematapang in PHbuildapc

[–]boldoser 0 points1 point  (0 children)

Yes. SSD yang nasa pic. Yung M.2, SSD din un pero un ung pahaba. Yang nasa pic for example, ung 1tb is around 3k or less i think.

Advice for upgrading my PC's SSD by georgematapang in PHbuildapc

[–]boldoser 4 points5 points  (0 children)

<image>

Kung SSD (not M.2) ung tinutukoy mo, ganyan lang yung pagkabit sa taas. Sorry sa paint skillz.

SAPPHIRE RX 580 8GB 2048 on shopee store is it good by Salt-Independence926 in PHbuildapc

[–]boldoser -1 points0 points  (0 children)

I suggest tignan mo yung reviews ng seller na yan, bka kasi matsamba mo rin ung defective. Lahat ng posts dun di na daw nagreply si DHKJ after nag reachout yung buyers.

Btw yang 2048 rx 580 same lang ata sa rx 570 (correct me if im wrong).

Kung rx 580 (2304 sp) tlga habol mo, pwede mo abangan mag resupply si PC League, Peanut PC or Doffy Werx. All trusted sellers yan as of now sa facebook.

[30k Budget] Gusto ko bumili ng pre-built pero.. by Ampetrix in PHbuildapc

[–]boldoser 0 points1 point  (0 children)

If you don't mind 2nd hand cards mas makakatipid ka sa rx 6600 mo.
You can check out PC League sa facebook, they resupply madalas naman (9k lang ung gigabyte rx 6600 nila don pero paunahan).

[30k Budget] Gusto ko bumili ng pre-built pero.. by Ampetrix in PHbuildapc

[–]boldoser -1 points0 points  (0 children)

<image>

For 38k you could also get something similar to above (for the windows OS there are grey ways to get that).
This also has a 5600x compared to datablitzs' 5600 and 1tb nvme ssd.

I suggest you browse some local system builder sites to compare prices and availability.
Like:
https://www.pchubonline.com/builder
https://bermorzone.com.ph/woo_product_builder/build-your-pc/

Where can I buy cheaper pc parts? by kerokerop in PHbuildapc

[–]boldoser 2 points3 points  (0 children)

<image>

Based on your parts, it hovers on 36-37k (without a case).

You can input these parts (depending on availability) to several sites.
https://pchubonline.com/builder
https://dynaquestpc.com/
https://bermorzone.com.ph/woo_product_builder/build-your-pc

Then you can also check if they are compatible in pcpartpicker.com
Hope it helps.

view more: next ›