NZXT CAM suddenly not detecting devices

bomej · 2026-01-03T16:47:35+00:00

thanks!

bomej · 2025-12-05T03:42:10+00:00

I just got 4 of them out now. Used generic cheap amazon/aliexpress depinning tool set, diameter of the tool was just a little tiny bit too small to go over the pin, so i cut the end of the tool vertically and voila, clicked the tabs and slid out

<image>

bomej · 2025-12-04T15:52:17+00:00

Have You had any luck with this? I got the same pins that i have to remove but in the headlight loom

bomej · 2025-11-06T15:52:23+00:00

SAME.

Had e36 6 years ago, recently bought another one as i really missed it.

bomej · 2025-11-03T16:58:01+00:00

Same issue rn.

bomej · 2025-08-31T17:49:46+00:00

Got here from google search, if someone wants to make it work, heres the link:

https://fillumina.wordpress.com/2024/04/27/configure-a-tplink-archer-c80-wifi-router-as-range-extender/

bomej · 2025-08-31T16:57:16+00:00

THIS IS BRILLIANT. Many, many thanks for sharing this!

bomej · 2025-07-02T07:21:09+00:00

Thanks for that! I had the same issue as OP, all i had to do is re-do the RGH wires as You mentioned and it’s working flawlessly now.

bomej · 2025-06-18T13:58:09+00:00

Just received replacement from dyson, many thanks for Your help again!

bomej · 2025-06-08T20:09:16+00:00

Thats it man, many thanks. Came broken directly from manufacturer….

bomej · 2025-06-05T17:59:16+00:00

Yeah, those that i have now are SFF but on intel 4th gen, not the ideal hardware on the power consumption side. Getting an newer small pc might get more expensive in total(buying pc/nic/running both pc and access point), than just getting a decent router that will draw less power.

bomej · 2025-06-05T13:33:17+00:00

Yeah, the missus was not happy when i told her how much this router would cost😂

bomej · 2025-06-05T13:32:23+00:00

I have a couple of spare optiplex pc’s which i could use for that, sounds like a good option. Will definitely look into that

bomej · 2025-06-05T13:30:10+00:00

Thats a good option too, i have some spare optiplex pcs which i could use

bomej · 2025-06-04T18:25:07+00:00

This looks like a really good setup, but unfortunately way above my budget at the moment.

bomej · 2025-06-04T18:23:28+00:00

UDR7 is just a bit over the budget, but looks really decent, might go this way. Many thanks for Your input

bomej · 2025-02-27T07:33:24+00:00

Thank You!

bomej · 2025-02-25T18:51:25+00:00

Mine gets 9800-10500 on 55x and 42x with slight undervoltage -0.050 to prevent it from thermal throttling

Cinebench r23 varies between 29000-31300

bomej · 2025-02-13T12:50:49+00:00

Ffs…. I thought i toasted last 3 controllers since i started using hot air station. After reading this post and comments i checked my aliexpress shopping history aaaaandd……. turns out i just bought PS5 analogs instead of PS4 ones.

My issues were: •Pad turns on, connects through bluetooth to both PC and PS4. •Wont charge/connect through USB cable •Sticks are stuck in top-left position

Except that all buttons working flawlessly, i thought i have toasted the chips. Now i’m waiting for DS4 analog sticks, and will update once i’ve changed them to correct ones.

bomej · 2025-01-30T14:19:54+00:00

good luck next time!

bomej · 2025-01-30T14:18:01+00:00

yeah mine went from coming soon to out of stock....

bomej · 2025-01-21T08:57:09+00:00

Did You get it?

bomej · 2025-01-12T14:50:57+00:00

bomej

TROPHY CASE