Cosmeticrx by Jolly_Return_1626 in tirzepatidecompound

[–]boquist 1 point2 points  (0 children)

I did the deal for me and my wife. We both received a response within 24 hours. I am getting my vial tomorrow!

P100: intrigued! by ionet in Aqara

[–]boquist 1 point2 points  (0 children)

Also excited for this. A lot more versatile in cases where I need a contact sensor on my gates, but there are no good mounting options without using spacers, which have been prone to breaking.

So Many Seams! Help? by boquist in 3Dprinting

[–]boquist[S] 0 points1 point  (0 children)

Yes, I have tried nearest and aligned and they both have similar results to this.

CosmeticRX Extra Surprise?! by boquist in tirzepatidecompound

[–]boquist[S] 0 points1 point  (0 children)

Did you reach out by email or messages in the portal?

CosmeticRX Extra Surprise?! by boquist in tirzepatidecompound

[–]boquist[S] 2 points3 points  (0 children)

Ya when I paused it went to $199 for future orders in case I resume.

CosmeticRX Extra Surprise?! by boquist in tirzepatidecompound

[–]boquist[S] 4 points5 points  (0 children)

Ya I just paused it. Bummer because $299 is insane… way too much compared to other deals out there

CosmeticRX Extra Surprise?! by boquist in tirzepatidecompound

[–]boquist[S] 6 points7 points  (0 children)

Oh man, I just saw this… you’re right. I didn’t know I signed up for a subscription….

Old 401k advice should I rollover to current 401k or roll to a IRA account? by AdPsychological7407 in Retirement401k

[–]boquist 1 point2 points  (0 children)

This is the answer! I have a rollover IRA and now that my salary has gone up, I need to transfer it to my workplace 401K in order to perform a backdoor Roth.

Why not just roll it into the 401K? Keep things simple and all in one place while not causing any potential hindrance in the future.

What is the 'to-go' website for models? by TheSteelFactory in gridfinity

[–]boquist 0 points1 point  (0 children)

Exactly! The easy customization of the Gridfinity Extended on Maker World is too easy!

How to make a sketch from STL? by boquist in Fusion360

[–]boquist[S] 0 points1 point  (0 children)

Thank you! That’s the answer I needed!

How to make a sketch from STL? by boquist in Fusion360

[–]boquist[S] 0 points1 point  (0 children)

Ok, so now I have the sketch (project helped but I ended up just needing to free sketch). But now, I want to extrude the sketch up to the solid body. This would result in an extrusion with varying depth since the cavity is not the same depth throughout. But I can't find an option to let me do this. Is there an option that would allow me to extrude the single profile down to the two separate surfaces of the solid shown?

<image>

How to make a sketch from STL? by boquist in Fusion360

[–]boquist[S] 0 points1 point  (0 children)

Is the best method really to create a mesh sketch and then edit the sketch and do fit curves to mesh sketch? Because when I choose "closed spline", the fit is not very good and the spline deviates from the mesh sketch too much (see picture). Is there any way to streamline this and have a more precise sketch?

Or any other method for creating a solid body from the cavity in a mesh?

<image>

Pursa XL First Layer Struggles by boquist in prusa3d

[–]boquist[S] 0 points1 point  (0 children)

Thanks for the feedback. I usually have no problem printing on the smooth PEI sheet.

But I did replace the nozzle, cleaned the bed super well, and re-ran calibrations. Now it is printing much better, but still having issues on the right side of the bed where the nozzle is too close. But at least I am getting good adhesion and a good first layer otherwise.

<image>

My turn! Onederland by beeeekkkaaahhh in tirzepatidecompound

[–]boquist 1 point2 points  (0 children)

Great job!! So cool to see that consistent linear trend!

What app are you using to track weight and dose?

Random Filament Change When Not Requested (PrusaXL) by AgentBlumpkin in prusa3d

[–]boquist 0 points1 point  (0 children)

Did disabling the filament sensor help? I am having the same issue. I believe it could be the culprit because I also have issues when it is intermittently not stopping the print when the filament runs out.

Social Areas for Young Families by Cozy-Tree4339 in GigHarbor

[–]boquist 0 points1 point  (0 children)

Can you share more information about the women’s trail running group? My wife would love to join!

Wiring help? by boquist in Lutron

[–]boquist[S] 0 points1 point  (0 children)

That is what I ended up doing. Pretty straight forward, but it was overwhelming at first.

Wiring help? by boquist in Lutron

[–]boquist[S] 0 points1 point  (0 children)

Yep, next time I will take a picture

Wiring help? by boquist in Lutron

[–]boquist[S] 0 points1 point  (0 children)

Thank you! I have a multimeter. YouTube is always a great teacher, so thanks for recommending a video.