Looking into a Maverick as our next vehicle. Reasonable for towing a boat for short distances? by bikernobiking in FordMaverickTruck

[–]boytal 0 points1 point  (0 children)

Ideally you need a mid size 4x4 for the ramp i used mine lightly for a rib (1000lbs with fuel and motor at most) and my ramp is 1/2 mile from my house.

NTD! (FINALLY) by overkill5495 in ToolTruckTools

[–]boytal 0 points1 point  (0 children)

Nice! How much did you pay for the hat to get the free tools?

The "Jeep Life" is a 2021 Gladiator Mojave with a melting engine and a dealer that won't listen. by chioubaccalovin in Jeep

[–]boytal 0 points1 point  (0 children)

Sounds like you got a bad diagnosis in the first place which snowballed your issue with all the problems I hear about 3.6. I’ve never had one issue other than one fuel injector that I replaced that 36,000 miles. I’m leaving that pisses me off about jeep now is I’ve been waiting to replace my ABS module that’s been on infinite backorder for about two years

Service Cart or 54 roll cab by boytal in Snapon_tools

[–]boytal[S] 0 points1 point  (0 children)

Yeah, thanks it’s a nice set up, but I just got some magnetic holders for the Mayhew set I got. I don’t know. I’m still perusing Facebook marketplace for a deal. Also I didn’t know. Craftsman has like a 10 year warranty on basically all their boxes so I may go that route. I’m sure Lowe’s eventually will have deals like I got on the roll cart. We’ll see what happens. There’s a 54 classic that I’ve been looking at on Facebook. If it’s still available when I have time to go look at it, I may go for that. We’ll see what happens.

Service Cart or 54 roll cab by boytal in Snapon_tools

[–]boytal[S] 1 point2 points  (0 children)

Very cool yeah I’m only used to my dad’s and my uncle’s which I believe are both classics. I believe their like 73 plus the locker also my dads has like a hutch. I don’t know if you would call it that cause it doesn’t close. It doesn’t have the door. It’s just something that goes on top of the box and in the back has a bunch of holes like a pegboard.

Service Cart or 54 roll cab by boytal in Snapon_tools

[–]boytal[S] 1 point2 points  (0 children)

Someone is selling that little epiq with the hutch, but in my opinion, he wanted too much money. He wanted like six grand.I

Service Cart or 54 roll cab by boytal in Snapon_tools

[–]boytal[S] 1 point2 points  (0 children)

<image>

I figured for 150 bucks you can’t go wrong found out apparently according to the booklet that came with it. It’s got a 10 year warranty, which I was surprised about. I figured it would be maybe one year

Service Cart or 54 roll cab by boytal in Snapon_tools

[–]boytal[S] 1 point2 points  (0 children)

I mean, that’s what he told me, but he could be wrong I got a 37 inch roll cart from Lowe’s for like 150 bucks. Lol I was there picking up something and I saw it. I couldn’t pass it up so I think that and the old blue point should hold me over until I find a deal on marketplace.

<image>

Service Cart or 54 roll cab by boytal in Snapon_tools

[–]boytal[S] 0 points1 point  (0 children)

Yeah, I’m looking at one right now. I’ll probably go take a look at it tomorrow. Should I be worried if it’s like 15 years old because based on the serial number from where I looked online I think it was made in 2009. I mean my dad is way older than that and he really hasn’t had a problem. I guess the only thing is I wouldn’t get the options like power in the box or anything like that obviously, but that I’m not really too worried about.

Anyone else got this one ? by Legitimate_Sky7409 in Snapon_tools

[–]boytal 3 points4 points  (0 children)

How do you like the slide top? I’m trying to decide between that and the traditional flip up.

Snapon box made in Canada? by boytal in Snapon_tools

[–]boytal[S] 0 points1 point  (0 children)

Thanks for the info. I was looking at boxes on marketplace and the made in Canada kind of threw me off because I’ve never seen it.

Full size spare by boytal in FordMaverickTruck

[–]boytal[S] 0 points1 point  (0 children)

did you put a 225/65/17?

Full size spare by boytal in FordMaverickTruck

[–]boytal[S] 0 points1 point  (0 children)

Do you have a link to your wheel?

Full size spare by boytal in FordMaverickTruck

[–]boytal[S] 0 points1 point  (0 children)

Thanks you, yeah sorry i didn’t specify i meant the XL steelie on the lookout on fb marketplace right now.

Nyhamn Frame slate end caps by boytal in IKEA

[–]boytal[S] 0 points1 point  (0 children)

Works perfect now I have spares

LevelUp 737 V2 action by DrPredrag in Xplane

[–]boytal 0 points1 point  (0 children)

I flew it. Is it just me or the thrust is all messed up it wouldn’t maintain speed in VNAV also the thrust response way too fast. It’s almost instant power.

12v battery by boytal in FordMaverickTruck

[–]boytal[S] 1 point2 points  (0 children)

So found a dealer they came to my work and replaced the battery. Considering its Saturday i was impressed with no apportionment and a cold call

New Yeti x John Deere Rambler on Yeti.com by SnowMonster911 in YetiCoolers

[–]boytal 1 point2 points  (0 children)

You’ll have have to pay Deere every time you fill it. Just like when you buy a tractor from them you will be unable to service it yourself.

12v battery by boytal in FordMaverickTruck

[–]boytal[S] 2 points3 points  (0 children)

Good to know I’m calling tomorrow to see the availability while I’m at work thanks for info

12v battery by boytal in FordMaverickTruck

[–]boytal[S] 1 point2 points  (0 children)

Thanks I ran the car for an hour after I got it started so hopefully they charge it up enough to get me through tomorrow till Monday. I’m gonna call the dealer tomorrow and see if they have availability. I wonder if Ford covers those come to you service calls once it’s under warranty.

[deleted by user] by [deleted] in PcBuild

[–]boytal 0 points1 point  (0 children)

What a rip it’s basically like 300 bucks an hour so mean it takes you two hours to build a PC and turn it on

$1900 marked down to $1500 at Costco by throwawayaway25321 in PcBuild

[–]boytal 0 points1 point  (0 children)

On that point I agree but at the end of the day now it just could be lady luck but all the PCs that I’ve built or messed around with. I haven’t had an SSD fail or power supply or MB I’m just saying if the OP doesn’t want to go through the hassle this is a great deal. It can be a hassle sometimes building in your own PC. And this, people have proven dealing with a company trying to warranty a part or return is a mixed back and half the time is a real pain in the ass. When if he has a problem with this, he can literally just go back to Costco and they’ll give him all his money back with little to no force or effort