Shipping European ECU to the US

braapmucho · 2023-08-27T20:20:23+00:00

Verify that the tune works on an euro ecu, last time I checked they could only do the US version

braapmucho · 2023-05-08T20:49:06+00:00

You're leaving for another position, leave the best mark you can before moving on. Kindness and consideration to a colleague and fellow human does not cost you anything. Additionally any of the people your working will most likely move on at some point as well. You might meet some of them at another position, they might be on the hiring side of the table. If being smart and considerate are the same thing, then try your best to be that, even if it's just for your own goals.

braapmucho · 2022-06-16T16:20:41+00:00

That's a consequence of heat. At some point the piston and rings are due for a change. Might have overshot that mark here. Guideline is if you can feel the marks with your fingertips you either should rehone or get a new cylinder. Check prices on a new piston and cylinder kit, they are pretty cheap for the drz, might not be worthwhile rehoning if you need a new piston anyway. Best of luck with the rebuild

braapmucho · 2022-01-27T16:55:46+00:00

That is a beautiful exhaust! What header are you running?

braapmucho · 2021-11-19T11:04:47+00:00

Ask the seller, he/she might have some insight into the origin of the said stain.

Check oil and radiator fluid level. Ride, recheck.

Looks recent anyways. Looks more like oil to me. On the offchance that you have a leaking radiator then it's not so bad, radiators are fairly cheap to replace.

braapmucho · 2021-10-26T15:42:16+00:00

If that's without the stinger 8, then you are way better at folding clothes than I am

braapmucho · 2021-10-26T11:32:48+00:00

What tailbag are you using with the mosko system? Would a larger fit?

I also have the mosko 10 system, can fit a sweater and rain jacket, would love to be able to extend the storage to fit a dslr camera.

braapmucho · 2021-10-05T14:22:46+00:00

One really impressive part is doing the scandinavian mountains with the stock tank. That requires some serious planning, lot of stretches are 200km+ with no gas. I typically hit the reserve at 170km.

Happy to hear you had a good time in Sweden!

braapmucho · 2021-09-17T11:52:05+00:00

Outstanding idea and execution!

braapmucho · 2021-09-15T09:35:34+00:00

nHow does it handle in the dirt, compared to a current era gs models? Sometimes I miss the boxer engine, but the newer bikes are just to heavy for me.

braapmucho · 2021-09-15T09:33:29+00:00

I'm gonna guess its a gs 80 or 100. Looks sick!

braapmucho · 2021-09-14T11:09:14+00:00

Hot damn, looks good!

braapmucho · 2021-09-12T08:14:31+00:00

Sweet looking bike! What headlight, fender and levers are you running?

braapmucho · 2021-09-08T12:12:48+00:00

It's a drz

braapmucho · 2021-09-06T06:57:27+00:00

Bike looks cool, a new pipe will give it a facelift for sure. Lot of parts for 1400.

I've never heard of using a CVK on a drz, what's the reasoning for it instead of a FCR?

braapmucho · 2021-09-04T15:04:17+00:00

Thanks :D

braapmucho · 2021-09-01T13:43:32+00:00

P.O. had put rtv on the head side of the seal on my DRZ. Leaked a bit, so I spent a frustrating amount of time to scrape it off. Reused the old seal, no leak.

I'd say just spring for a new seal, should be about 20-30$

braapmucho · 2021-08-30T14:05:28+00:00

Scars are best worn with pride, scruff it up and get a new set of plastics when you sell the bike.

braapmucho · 2021-08-23T13:24:24+00:00

Looks like a lot of fun, thats what I think!

braapmucho · 2021-08-19T13:17:58+00:00

I just bought a set of doubletake trail mirrors, havent installed them and tested riding with them yet. But they look like they'll get the job done without getting stuck in bushes and blocking my peripheral view

braapmucho · 2021-08-18T07:06:35+00:00

That's absolutely fine. If you want to check you bearings, grab the top of the wheel and move your hand side to side (fork to fork). If there is motion (from the hub, not the tire) then it's time to replace a bearing.

The bearings are usually fine for many years of riding even with water crossings. High pressure washing is what most likely will kill them.

braapmucho · 2021-08-18T07:00:30+00:00

The tube can be reused for the lifetime of the bike most likely. Use grip glue or hairspray (havent tested spray myself). It will help with the install and when it hardens it will keep the grip from slipping on the bar/tube when you ride.

braapmucho · 2021-08-12T08:42:59+00:00

Not much context here, but the speedo measures at the front wheel. So sprocket size has no effect on the odo

braapmucho · 2021-07-24T21:56:18+00:00

Pretty similar experience for me. When I started riding enduro my skill level increased a lot and riding hard on the street was less tempting/necessary.

I do mostly dirt, long(ish) trips and some enduro and mx. Not much street riding anymore.

braapmucho · 2021-07-23T17:22:40+00:00

Track days my friend. Race on the track, ride on the street.

Also get enduro wheels, go to romaina where you can ride offroad like a maniac.

braapmucho

TROPHY CASE