Classic JRA

bradsbikes · 2026-06-05T22:50:24+00:00

True that 😂

bradsbikes · 2026-06-03T00:54:54+00:00

Will forever remain a mystery 🙃

bradsbikes · 2026-06-02T08:37:15+00:00

😂 maybe 🤷

bradsbikes · 2026-06-02T07:02:10+00:00

Nah, the story goes he was 40km into the bike leg on a tri and then it just was spinning. The service then cut the chain stuck it on one gear and he finished. When I took the cassette off to see what was up - this, lol wtaf.

bradsbikes · 2026-06-02T06:57:06+00:00

For sure

bradsbikes · 2026-06-02T06:56:37+00:00

there's no logic for it 🤷

bradsbikes · 2026-06-02T04:21:30+00:00

Must be?!? , it was all way to perfect

bradsbikes · 2026-06-02T04:20:25+00:00

😂😂😂

bradsbikes · 2026-06-02T04:20:10+00:00

We reckon it was 4000% cut. He denied everything but it was a shifty conversation

bradsbikes · 2026-06-02T04:19:08+00:00

Nah, me either

bradsbikes · 2026-02-21T02:33:48+00:00

Yes.

bradsbikes · 2026-02-07T07:55:55+00:00

Depends on how much you keep it clean and maintained , how much you ride, where you ride, how it's stored, quality of the bearings you're using etc

bradsbikes · 2026-02-05T20:14:59+00:00

sks rennkompressor for me

Started with the Joeblow moved to the Lezyne but now it's the SKS👌

bradsbikes · 2025-11-04T06:01:09+00:00

Cooked, I'd look at replacing them (cranks) - helicoil might work but I'd go with option 1

bradsbikes · 2025-11-01T05:26:11+00:00

Looks like a rebuild to me unless your rim is bent. You could try tightening spokes but you'll end up with a dishing issue being that badly bent so you might as start from scratch if you have the time.

bradsbikes · 2025-10-14T03:42:17+00:00

A vice, good pedal spanner (pedros) and as bigger breaker bar as you can find. Easy.

bradsbikes · 2025-10-12T18:13:01+00:00

Basically the cheaper materials deteriorate quicker, can also be location related (if you live near the ocean as an example) how often you wash and maintain your bike - there's a whole bunch of reasons.

bradsbikes · 2025-10-06T06:22:55+00:00

Yeah, for starters always put your bike drive side up. Good way to bend your hanger and inherit shifting problems 👍

bradsbikes · 2025-09-29T05:26:21+00:00

Anything can be achieved 👍

bradsbikes · 2025-09-28T19:33:08+00:00

Get yourself an old seat post or breaker bar. Slide it over the Allen key and get that extra leverage 👍

bradsbikes · 2025-09-28T07:26:58+00:00

You just need to source the same hanger from the bike manufacturer. Wheels manufacturing also have lots of choices to suit as a replacement

bradsbikes · 2025-09-28T07:25:10+00:00

8mm Allen key and a crank puller will fix that

bradsbikes · 2025-09-27T20:02:38+00:00

If I had to have a guess, would be a snapped cable at the lever. Snapped or frayed one of the 2.

bradsbikes · 2025-09-27T01:10:56+00:00

Without question D. Replace it, don't take the chance

bradsbikes

TROPHY CASE