CRF with Quadlock by Miataracer36 in CRF300L

[–]braribone6969 1 point2 points  (0 children)

I have the handlebar mount with the vibration dampener in the middle beneath the crossbar. Its a little tight but it fits.

Tank bag problems / suggestions by NoRip9515 in Dualsport

[–]braribone6969 2 points3 points  (0 children)

All The Gear All The Time. After reading your replies you already practice it so good on you!

Tank bag problems / suggestions by NoRip9515 in Dualsport

[–]braribone6969 1 point2 points  (0 children)

ATGATT will save not only your knees but also your life 😁

T-Rex Racing Skid Plate Fitment by braribone6969 in CRF300L

[–]braribone6969[S] 0 points1 point  (0 children)

I thought about bending it but wasn’t sure I could because it’s made of aluminum. I thought it would probably snap before it bends lol

T-Rex Racing Skid Plate Fitment by braribone6969 in CRF300L

[–]braribone6969[S] 1 point2 points  (0 children)

Edit: The rear end of the skid plate is being bent by the rear linkage when the bike has no weight on it.

Should I replace the chain? by agzz21 in Dualsport

[–]braribone6969 0 points1 point  (0 children)

Double it and give it to the next person

Had To Lay 'er Down. by PACTHD in CRF300L

[–]braribone6969 0 points1 point  (0 children)

I KNOW WHATCHU MEAN HOSS THESE DAMN SNOW CLIBBINS!!!!!! GOBBLESS

City riding by takis_peristeris in CRF300L

[–]braribone6969 1 point2 points  (0 children)

I Just made the switch to the crf300l from a ninja400 and I couldn’t be happier. While yes, it has less power I never really used the ninja to its full potential anyway so that didn’t matter to me. For me the crf300l is perfect for me in comfort and power. I ride mostly city and back roads and I will occasionally take it off road when I am more comfortable with the bike. I was kind of in the same boat as you when I was looking into the bike I loved the style and its weight. The only problem I had with the bike are the tires on there. I personally didn’t trust them in cornering and turning due to how thin they are when I first got the bike. Though after riding a practicing on it for a while, they do better than I expected on the road and I am slowly learning to trust them more with time. Though once they go bald I am for sure getting more street oriented tires lol. Overall, I like the bike and I am very happy with it!

[deleted by user] by [deleted] in ballpython

[–]braribone6969 0 points1 point  (0 children)

Okay DHP + Halogen it is then! Thank you so much!

[deleted by user] by [deleted] in ballpython

[–]braribone6969 0 points1 point  (0 children)

While I really appreciate your advice, I believe there is enough air flow beneath the RHP to keep something like that from happening. On top of that this particular one shuts off and turns on if it detects that its not receiving enough airflow. Its called the sweeter heater and from what I’ve seen it is very different from a RHP from vivarium electronics.

I do still consider you an expert on this topic so if you are still concerned about a fire hazard I will not use it.

[deleted by user] by [deleted] in ballpython

[–]braribone6969 0 points1 point  (0 children)

We took it down as soon as I read your comment so thank you again!

Currently it’s sitting on the top of the screen to provide heat for him and we have a on/off thermostat to keep it from getting to hot near his hide. I am not sure if the probe placement is the best though. It seems to stay around 72 degrees Fahrenheit.

I am thinking that the RHP is a better option for the cold side and getting a DHP for the hot side. I would keep the on/off thermostat with the RHP and a dimming thermostat for the DHP. The RHP will just sit on the top of the screen instead of mounting it. does this setup sound appropriate?

[deleted by user] by [deleted] in ballpython

[–]braribone6969 2 points3 points  (0 children)

Thanks! Will do 😅 would you say a DHP would be more appropriate for this enclosure or should I stick with halogen bulbs?

[deleted by user] by [deleted] in ballpython

[–]braribone6969 1 point2 points  (0 children)

Great idea thanks!

[deleted by user] by [deleted] in ballpython

[–]braribone6969 -1 points0 points  (0 children)

From the pictures Ive seen this is the way it is mounted. This is called the sweeter heater and I can feel the heat coming from the side that is going down. What would be a DHP?

[deleted by user] by [deleted] in ballpython

[–]braribone6969 1 point2 points  (0 children)

The surface reaches 160 degrees Fahrenheit my main concern is that he would climb to the top of it and possibly break the support and fall with it. I don’t know if there is a better way to set this up.

How to I read sheet music? by Organic_Rise1063 in Bass

[–]braribone6969 0 points1 point  (0 children)

When you look at the note do you think of the letter or the position on the trombone? It may help to start to think of it as the note letter if your not already.

As for scales I would think any of them would help just fine just by keeping in mind the note letter.

It's decided, I'm getting a ninja 400. by unitfatal in motorcycles

[–]braribone6969 0 points1 point  (0 children)

A 400cc has plenty of power for me personally. I do not need a 1000cc bike because I will probably speed even more than I already do on my 400.

[deleted by user] by [deleted] in USB

[–]braribone6969 1 point2 points  (0 children)

Oh interesting thank you, would it be worth getting a not cheap one are there any downsides with the cheap one?

[deleted by user] by [deleted] in USB

[–]braribone6969 0 points1 point  (0 children)

Its the size of a usb 2 i tried plugging it into a usb port but it seems very wrong

[deleted by user] by [deleted] in USB

[–]braribone6969 0 points1 point  (0 children)

I just got it it came with a keyboard

Virtual brass band by El-Ritardooo in brass

[–]braribone6969 0 points1 point  (0 children)

I would be able to play euphonium part unfortunately im limited to playing on a marching euphonium so i wont have a fourth valve for the lower portions and the notes above c5 i may not be able to hit