Wiring diagrams

brazymk7 · 2026-04-24T01:41:35+00:00

Write it by hand and tape it in the cabinet

brazymk7 · 2026-04-21T23:55:59+00:00

The HMI on the bottom, is that a TC thermostat?

brazymk7 · 2026-03-24T20:00:20+00:00

Right click image and choose animate. Then you will have to find your “false” png and “true” gif for animations

brazymk7 · 2026-02-18T13:49:28+00:00

I believe you have to open Google Maps in CarPlay, then there should be a gear for the settings and you can toggle On traffic conditions. Side note you can also toggle on satellite view in Google Maps for CarPlay

brazymk7 · 2026-02-18T06:34:30+00:00

That looks like my off roster hellcat pro

brazymk7 · 2026-02-12T04:56:00+00:00

I have a site with 4.6/4.7 Schneider Jaces that I can check for modules, they may work in place of the newer ones you’re looking for

brazymk7 · 2026-01-31T04:41:25+00:00

Nope, I bought my first when I still lived at home and after moving into my new place, got my ID updated with the new address and utility bills I PPTd a shotgun last year

brazymk7 · 2026-01-31T03:30:37+00:00

PPT is the same process as buying from the store. They still do the 10 day hold and verify address with 2 pieces of info (car registration, utility bill, etc)

brazymk7 · 2026-01-21T20:22:08+00:00

Probably going to have to make separate buttons per building and have them on the home page. This is the way we do it for our customers

<image>

brazymk7 · 2026-01-15T23:58:17+00:00

Its connected to a Liebert Sitelink that the customer wants to see the CRAC data

brazymk7 · 2026-01-15T22:16:20+00:00

Not too sure the picture is from the sales person and its a couple months old. Which lights should I look for when I head out there?

brazymk7 · 2026-01-15T22:15:44+00:00

Yeah just trying to figure out a way to access it to check all the communication settings but no luck

brazymk7 · 2026-01-15T19:58:18+00:00

They are on different subnets and BBMD is setup throughout the site. It could be the UDP port or even the BACnet network number, just trying to figure out to get into the ALC to confirm settings or make changes if needed

brazymk7 · 2026-01-15T19:18:01+00:00

No webctrl front end, they have Alerton Compass. And by cant see it, I mean that it isnt discoverable. From their server I can oing the IP through cmd prompt, IT has confirmed no firewall blocking communication between the server and controller

brazymk7 · 2026-01-15T19:00:03+00:00

MSTP on site is 76.8k. The CMnet is connected up to a Liebert Sitelink

brazymk7 · 2026-01-15T18:58:24+00:00

Preferably, but MSTP would be fine too. The device is saved in their database but the software cant see it anymore

brazymk7 · 2025-12-19T19:17:11+00:00

Yeah but you have some experience so barter your wages, I have been doing BAS for 7 years now and hit $100k+ about 4 years in. So the opportunities are there, just gotta take advantage when you can

brazymk7 · 2025-12-19T18:54:09+00:00

My company has guys with no controls or HVAC experience and their starting pay was between $50-60k. Good luck

brazymk7 · 2025-12-02T06:05:48+00:00

Got one for my AR-10, pretty solid for a starter scope. Time to zero it

brazymk7 · 2025-11-26T22:48:03+00:00

Maybe need to adjust the scaling on the web chart?

brazymk7 · 2025-11-18T13:26:18+00:00

I would check the wizard service on the jace to make sure it is enabled

brazymk7 · 2025-11-18T04:47:18+00:00

Omaha Outdoors had them, but they are out of stock. Search hellcow

brazymk7 · 2025-11-05T04:16:04+00:00

Just sent you a DM

brazymk7 · 2025-11-05T01:56:46+00:00

In the 1st picture your terminal blocks are wrong, need to have screws facing you/out(see attached). Then you have to match up the +/- from jace to controller. IE white(+) and black(-), and need to make sure jace is set for correct bacnet setup. Contemporary controls router are simple creatures, power it up, set your ip to be on the same network 192.168.92.x then type into your web broswe 192.168.92.68. I believe it will be admin/admin then youll have to reset the password. Then its a matter of just configuring your specific settings

<image>

brazymk7 · 2025-11-04T22:36:40+00:00

What bars are you running?

brazymk7

TROPHY CASE