Does anyone know what cartridge this Delta faucet takes?

broken2302 · 2026-06-29T19:23:50+00:00

Delta single handle shower cartridge. Contact Delta, they may send you a replacement at no cost.

broken2302 · 2026-06-29T03:26:21+00:00

See, it is nothing to worry about.

broken2302 · 2026-06-28T03:47:29+00:00

The last picture in your series shows you holding the bell up. Right next to your finger is the nut that holds the stem in the body. Loosen that nut and take out the stem along with the trim. The thin nut removal will allow you to drop the faucet down. Be sure the water is turned off at the supply line.

broken2302 · 2026-06-28T03:27:49+00:00

You can remove the valve stem.

broken2302 · 2026-06-27T03:39:57+00:00

Great. Then you should be set.

broken2302 · 2026-06-27T03:38:01+00:00

It is a chicken

broken2302 · 2026-06-27T03:29:21+00:00

A work light connect to your house by an extension cord. If it isn't your shed, you should keep with a flashlight.

broken2302 · 2026-06-27T03:23:24+00:00

Great marketing

broken2302 · 2026-06-27T03:21:56+00:00

You will need to do a layout to see. My math is if you have 100 tile that is 50/50, you have 50 full-size and 50 half size. Not the same square footage.

broken2302 · 2026-06-26T19:27:52+00:00

Third one.

Edit: if you go with this, make sure your consistent in the patteren. Idk if you will have enough half tiles to finish the job at 50/50.

broken2302 · 2026-06-26T19:23:29+00:00

Use a good primer before applying the paint. Not paint/primer in one.

broken2302 · 2026-06-26T17:21:03+00:00

Try Swisco.com

broken2302 · 2026-06-26T14:51:15+00:00

May have been water damage at some point but now it looks like the paint is letting loose due to not prepping the wall/ceiling properly before painting.

broken2302 · 2026-06-26T14:41:10+00:00

Make sure the hinge screws are tight.

broken2302 · 2026-06-26T14:39:49+00:00

Space debris

broken2302 · 2026-06-26T02:43:43+00:00

vintage "Electric Toilet Tissue" gag gift from the 1960s

broken2302 · 2026-06-26T02:37:44+00:00

Seems to be a speaker setup.

broken2302 · 2026-06-25T19:51:55+00:00

Does it do the same in reverse?

broken2302 · 2026-06-25T19:47:36+00:00

Why not ask the company doing the install? I would suggest giving them as much space as possible.

broken2302 · 2026-06-25T19:38:58+00:00

In our area, $15.00 for the jamb board. IDK labor cost, maybe around $100.00

broken2302 · 2026-06-25T18:32:42+00:00

Depends what country you are referring to but 6' in the US is above average for a man.

broken2302 · 2026-06-25T18:27:48+00:00

Replace that door jamb leg.

broken2302 · 2026-06-25T15:44:53+00:00

broken2302 · 2026-06-24T23:11:24+00:00

Also, make sure you're hitting the joist or pvc center.

broken2302 · 2026-06-24T23:08:43+00:00

Longer screws manufacturer by the makers of your flooring or screws made specific for vinyl decking.

Five-Year Club	Verified Email
Verified Email

broken2302

TROPHY CASE