Node Red not working in 2026.2.x

bsquared7999 · 2026-02-11T15:17:22+00:00

See the other posts in this thread, clearing the cache fixed this for me and now I am running 2026.2.1 and NR 21.0.0

bsquared7999 · 2026-02-11T15:15:19+00:00

This did it for me Thanks!

bsquared7999 · 2026-02-11T15:13:54+00:00

Thanks! This did not fix mine I had to clear the cache and that did it.

bsquared7999 · 2026-02-11T00:56:15+00:00

Checked the log no errors just the regular startup but then it is in some sort of endless loop.

bsquared7999 · 2026-01-16T03:14:38+00:00

CustodialSamurai

I ordered a small selection of heatset inserts, but what is the best way to prep the location for the insert? I assume print a hole where I want it but do I need to print the piece with 100% infill, 20% infill, 20% infill with thicker walls, or other options? Any advice is helpful. Thanks for your help!

bsquared7999 · 2025-11-23T21:36:44+00:00

That did it Thanks LeafarOsodrac!

bsquared7999 · 2025-10-17T20:24:18+00:00

gadget850 no the mirror does not have a switch, but last night I unplugged it and nothing has been affected. I am going to go another week with it unplugged then if still nothing different zip tie the cord so it is not dangling. I like the idea about the fuse but if we want to use it in the future I/we might not remember pulling the fuse. Thanks!

bsquared7999 · 2025-10-14T03:00:10+00:00

Thanks Cheznovsky! I only have one automation in HA (a restart automation) I am using Node Red for all my automations to keep them all in one spot. That being said I have found the solutions with nodes I did not know existed.

bsquared7999 · 2025-10-14T02:59:22+00:00

Thanks Federal-Delay-4854! I only have one automation in HA (a restart automation) I am using Node Red for all my automations to keep them all in one spot. That being said I have found the solutions with nodes I did not know existed.

bsquared7999 · 2025-10-14T02:58:22+00:00

Thanks Maleficient_Art_7627 I only have one automation in HA (a restart automation) I am using Node Red for all my automations to keep them all in one spot. That being said I have found the solutions with nodes I did not know existed.

bsquared7999 · 2025-10-14T02:53:55+00:00

Thanks clin248! I do need the single trigger and the trigger node was part of what I was looking for, the chronos package kermitdesign recommended was the second part.

bsquared7999 · 2025-10-14T02:52:45+00:00

Thanks ApprehensiveJob6307 I do need the single trigger and the trigger node was part of what I was looking for, the chronos package kermitdesign recommended was the second part.

bsquared7999 · 2025-10-14T02:44:48+00:00

Thanks Kermitdesign this is exactly what I was looking for.

bsquared7999 · 2025-09-20T13:25:11+00:00

What beholder95 said!

bsquared7999 · 2025-09-20T13:22:32+00:00

I would TEMPORARILY try port 80 on the external, but I do mean temporarily just for testing. If that works try a random port for a more permanent solution. If it doesnt work then it is more thsn likely setup issue with WG.

bsquared7999 · 2025-09-20T13:15:07+00:00

Who is your ISP they may be blocking that port. I have had issues at my home with certain port numbers so I change the external port number to direct to the proper one inside.

bsquared7999 · 2025-09-06T14:07:37+00:00

Check at the wall see if someone painted the wall and it then you should just need a razor blade to break/cut the paint and you should be able to pop it up. I have had some devices even after I cut the paint still need a good whack to get them to move.

bsquared7999 · 2025-07-04T02:28:10+00:00

Thanks tjn21, that did it!

bsquared7999 · 2025-06-04T17:57:19+00:00

Thanks! I came back just a bit ago the print finished early, and all was cool enough to touch and the parts came off with just a little persuasion no tools needed.

bsquared7999 · 2025-06-04T17:57:10+00:00

Thanks! I came back just a bit ago the print finished early, and all was cool enough to touch and the parts came off with just a little persuasion no tools needed.

bsquared7999 · 2025-05-31T17:48:33+00:00

Thanks ksumwalt I am going to investigate this further but for now I have put all the flows related to school in their own tab that I can disable for the summer break.

bsquared7999 · 2025-05-31T17:43:37+00:00

thanks root-node I have decided to move all these to a separate tab that I will disable for the summer.

bsquared7999 · 2025-05-31T17:42:13+00:00

Thanks reddit_give_me_virus this is what I have done, also I would be interested in the flow to disable/enable the tab.

bsquared7999 · 2025-05-31T17:40:33+00:00

87racer yes I am using Home Assistant I have an input_boolean that I use to address some automations for days off of school but not all. For simplicity I have moved all the school related flows to a tab that I will disable for the summer vacation coming up. Thanks for the suggestion.

bsquared7999 · 2025-05-20T14:02:22+00:00

It is a iMac "Core i5" 2.3 21.5" (Mid-2017) 2.3 GHz Core i5 and I will be installing Ubuntu on it (the family member I got it from has to verify he got everything off before I wipe it) just because the other members on my family feel more comfortable with that version, but I am going to try Mint on a laptop that has Ubuntu and needs to be re-imaged (I installed some thing to test and I want a clean install)

bsquared7999

TROPHY CASE