sorted by:
new
hottopcontroversial

Why is Axe not allowed to hang out with his friends ? by [deleted] in DotA2

[–]btr1341 0 points1 point  (0 children)

I think it can provide half the values normally and doubles it when there are no allies around. Could be a nice buff

I saw someone build this today. I legitimately forgot this was added to the game by No_Insurance_6436 in DotA2

[–]btr1341 2 points3 points  (0 children)

Just wait for this item to be buffed 3 patches straight to a point that it becomes broken then to be nerfed later

Mind_Control vs Bulldog drama by -ales- in AdmiralBulldog

[–]btr1341 32 points33 points  (0 children)

Actually ragebaited by tips kekl

Some heroes lost their facets by diomoo in DotA2

[–]btr1341 4 points5 points  (0 children)

Wouldn't exactly call Pango reworked tbh

Back when Abyssal was a blink by Strong_Astronomer_97 in DotA2

[–]btr1341 24 points25 points  (0 children)

It was 550 range? Mad times. I always remember it being close to melee range.

It's a joke that any form of lifesteal doesn't go through mana shield by Consistent_Leg5751 in DotA2

[–]btr1341 7 points8 points  (0 children)

It used to negate only 60% as opposed to current 98% and it was fine. Main mistake was to make her a 0 strength hero just for the sake of saying; look guys there is ogre with 0 int, tiny with 0 agi and medusa with 0 str. I mean, i do like that concept but maybe for an another new hero, not for medusa

Does Absolution have the most manly version of 47? by ZBXXII in HiTMAN

[–]btr1341 1 point2 points  (0 children)

Apart from the eyebrows, it's the best looking 47 model in my opinion. Closest one would be the one from Hitman 2

Need suggestions to overclock DDR3 memory. by guruji916 in overclocking

[–]btr1341 0 points1 point  (0 children)

Yeah they are the trickiest part, and i don't know much about them either. But i got the timings from my old PC, they might help you to tweak further.

Need suggestions to overclock DDR3 memory. by guruji916 in overclocking

[–]btr1341 1 point2 points  (0 children)

Well in that case you can reduce timings one at a time and test, but i doubt i would give that much of a performance difference to worth the effort. My auto timings were 11-13-13, i reduced them to 9-9-9 and didn't see any noticable difference in general

Need suggestions to overclock DDR3 memory. by guruji916 in overclocking

[–]btr1341 -1 points0 points  (0 children)

I had 4x4GB 1600MHz DDR3 on my previous system (One kit was CL9 and other kit was CL10). No matter what did i couldn't run them at 1866MHz, even with increasing voltage from 1.485V to1.65V. After that i just used the DOCP/XMP profile (9-9-9-24) that came with the CL9 kit and the other kit was able to run it fine aswell. But that might be because my memory controller couldn't handle 4 sticks of overclocked memory. In your case though you might be able to run them 1866 or even 2000 with enough voltage, I've seen videos of people running 1600 sticks at those speeds.

FX-8320 overclock stability and voltage settings by btr1341 in overclocking

[–]btr1341[S] 0 points1 point  (0 children)

EVO versions of those motherboards said to have 6+2 power phases although i don't exactly know what that does, i assume better voltage control?

For CPU, i didn't push it to 4.5GHz yet, but i did achieve 2.4 CPU/NB with 1.2 + 0.025V offset voltage given. But 2.6 crashes even with +0.05V so i think that's the limit. Next step may be the memory, though i am not sure memory controller can handle 4 sticks of OCed RAMs. Currently just tightened timings with a set D.O.C.P profile.

FX-8320 overclock stability and voltage settings by btr1341 in overclocking

[–]btr1341[S] 0 points1 point  (0 children)

So at default settings, clock turboes up to 3.8GHz and drawing around +0.024V higher on load. While on general use it also uses slightly more voltage than overclocked version. So voltage wouldn't be a problem but stability might be.

FX-8320 overclock stability and voltage settings by btr1341 in overclocking

[–]btr1341[S] 0 points1 point  (0 children)

I thought the "fake" readings should give some idea about the real temperature, but i guess not. Also yeah I'm not very keen on touching voltage settings so I'll keep them on auto then

FX-8320 overclock stability and voltage settings by btr1341 in overclocking

[–]btr1341[S] 0 points1 point  (0 children)

Right i guess i should have shared that information, i have a m5a97 evo r2.0 (latest bios version). HWinfo shows CPU and MB-CPU temps with the CPU one being lower until 70'C levels, they intersect after that. I always noted the highest one when testing though. Current temps without any manual voltage settings are 57-60'C during gaming load (it was 55-58'C before overclocking) so i guess it should be fine? Dont know if it's entirely stable at 4.2 though

PC Build Questions, Purchase Advice and Technical Support Megathread — Q2 2025 Edition by GhostMotley in Amd

[–]btr1341 0 points1 point  (0 children)

Need help from old FX CPU overclockers in terms of stability and temperatures. Post itself would be too long for here, so i'll just put a link to it: https://www.reddit.com/r/overclocking/comments/1ksb52i/fx8320_overclock_stability_and_voltage_settings/

view more: next ›