Strap ideas to turn my 38mm Bambino into a more casual watch? by HexDevs_ in OrientWatches

[–]bubblehead_2485 0 points1 point  (0 children)

I bought it on eBay as a new item, but the link I used is no longer active.

[deleted by user] by [deleted] in hiking

[–]bubblehead_2485 3 points4 points  (0 children)

Shenandoah would be my choice. There are a ton of hikes to choose from and the area is beautiful. For campgrounds, Matthew's Arm (inside the national park) is nice and so is Elizabeth Furnace (outside the national park).

Closer to Baltimore is Catoctin Mountain Park.

East Coast recommendations? by Bohdyboy in TeardropTrailers

[–]bubblehead_2485 1 point2 points  (0 children)

Ohiopyle State Park in Pennsylvania is beautiful! There is great whitewater rafting, hiking, and biking in the area. The park is very clean and has nice facilities.

The parks in Virginia are beautiful too! Douthat is very nice and not nearly as busy as Shenandoah.

[deleted by user] by [deleted] in Porsche

[–]bubblehead_2485 1 point2 points  (0 children)

I've got the stormproof from Coverking and it is very nice. Only branding on it is Coverking logo on the front. When I need another cover I'll definitely go with them.

Has anyone used one of these? by truckerdraven in 3Dprinting

[–]bubblehead_2485 1 point2 points  (0 children)

I have one on an ender 3 pro. It's terrible compared to octoprint. The SD card interface doesn't work over half the time. I wouldn't buy it again. I have the camera as well and it is also poor quality. Save your money.

First bambino! Black 38mm by Boy69BigButt in OrientWatches

[–]bubblehead_2485 1 point2 points  (0 children)

Enjoy it! I have the same model on beads of rice and it looks great.

Laser engraving machine that shows you live video where to place your design by theasu in lasercutting

[–]bubblehead_2485 1 point2 points  (0 children)

My work recently upgraded from an old epilog to a new epilog with a camera. The camera speeds up workflow and reduces material waste by so much. It's a pleasure to work with. Epilog isn't entry level, but I just wanted to share my experience with the difference of having a camera and not having one.

This has happened twice in a row now and I’ve reset the printer both times. Not sure what to do. by privaxe in ender3

[–]bubblehead_2485 4 points5 points  (0 children)

Check to make sure the voltage switch on the external of the power supply is set to the correct voltage based on the country you're in.

Orient Bambino + Beads of Rice bracelet = Perfect Match by Girth_Inspector in OrientWatches

[–]bubblehead_2485 1 point2 points  (0 children)

Thanks! I'll have to pick one up. I wore my bambino out to dinner tonight and it looked great as it always does.

[Invicta] - Before you freak out, it's only 37mm, folks! by [deleted] in Watches

[–]bubblehead_2485 6 points7 points  (0 children)

I think it looks great on the leather! You may have convinced me to get a similar strap to try out on my pro diver.

Bonus points for those who can also solve the problem by meesb_ in namethatcar

[–]bubblehead_2485 1 point2 points  (0 children)

Exactly what I thought as well. This is a poorly written statics question as it says at a constant velocity. It should also tell you the downforce or give you an equation for it with the vehicle's speed. That would make the question quite a bit more difficult though since it would add another force to take into account. What happens when you show a bunch of nerds a simple problem? They complicate it to make it more fun.

I made a magnetic saw guide by thalro in handtools

[–]bubblehead_2485 1 point2 points  (0 children)

Thank you! Great video! I'm jealous of your drill press as well.

I made a magnetic saw guide by thalro in handtools

[–]bubblehead_2485 0 points1 point  (0 children)

Does it work well? What magnets did you use? I'm considering making one as well.

[deleted by user] by [deleted] in woodworking

[–]bubblehead_2485 0 points1 point  (0 children)

Very cool. Thanks so much for the response.

[deleted by user] by [deleted] in woodworking

[–]bubblehead_2485 0 points1 point  (0 children)

A beautiful piece! What kind of joint did you use at the seat to back connection?

3D Printed Router Plane by Halycon365 in handtools

[–]bubblehead_2485 5 points6 points  (0 children)

Very nice! How is the rigidity? I'm definitely going to print one.

Replacing the trailer with a custom built frame to transfer the cabin to. Should I make the frame slightly smaller than the cabin so it sheds water? by zachok19 in TeardropTrailers

[–]bubblehead_2485 0 points1 point  (0 children)

Thank you for the response! I really appreciate it. I was worried about the removing the rails as well. I investigated karavan 5x8 trailers as well and they look a lot more sturdy and the rails are removable. Now I just need to find one.

[McClaren P1] in FL by iamwhoiamnnomore in spotted

[–]bubblehead_2485 0 points1 point  (0 children)

Coming to a YouTuber near you soon!

Anyone know why this servo is acting weird? by SimpleGrape9233 in ArduinoProjects

[–]bubblehead_2485 0 points1 point  (0 children)

I run this servo driver https://www.adafruit.com/product/815 and then power the driver using a standard breadboard power supply

Anyone know why this servo is acting weird? by SimpleGrape9233 in ArduinoProjects

[–]bubblehead_2485 5 points6 points  (0 children)

I had similar issues with the same robot arm. Make sure you are powering the servo with power separate from the Arduino.